Megaprint Transfers

Condition: used, Year of construction: 2021, Supply voltage: 230V, current consumption: 1A. Including two printing tables, one vacuum table and one table without vacuum. The machine was used only lightly for approx. two years and is fully functional. Documentation available. An on-site inspection is possible. Hfsdpfx Acoz Akv Esgjl

Condition: excellent (used), Year of construction: 2007, SPS Vitessa Star G2 Year: 2007 Maximum format: 75 x 105 cm Hfsdpfx Asz Ad A Ejcgel Minimum format: 32 x 44 cm Maximum speed: 4000 sheets/hour Dryer In production Available immediately

Condition: excellent (used), Year of construction: 2007, SPS Vitessa G3 Year: 2007 Maximum format: 104 x 150 cm Minimum format: 50 x 70 cm Maximum speed: 2700 sheets/hour Minimum speed: 500 sheets/hour Air compressor SPS UV dryer Frames Stacker Hsdpfoz Ad Afsx Acgsfl Mabel feeder In production Available immediately

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Automatic carousel printing press, 10/12 stations Hfsdpozzpnwofx Acgel 10 colors 12 printing stations Usable printing area: 50x50 Year: 2000 Pneumatic frame carriers Print test/print start/print end system On-screen display of malfunctions Double-pass printing Quick-release system for printing stations No. 1 set of printing stations No. 1 set of squeegees and counter-squeegees

Condition: used, Two identical screen printing machines are available, max. frame dimensions: 750x1100mm, compressed air connection: 8bar, indexer connected load: 2.5kW, squeegee connected load: 0.6kW, an on-site inspection is possible. Hodpjzyq Trsfx Acgsfl

Condition: refurbished (used), functionality: fully functional, Equipment: documentation/manual, Hello, we are offering a Thieme TSC 130 squeegee cutting machine that has been completely overhauled in our workshop. It is suitable for a maximum squeegee length of 1300 mm. Hodpfjzyc T Rex Acgjfl In this system, the squeegee blade is trimmed thinly using a very fast-rotating special knife under a water/alcohol mixture. This is necessary if the squeegee blade has not been installed perfectly flat or if the edge of the squeegee blade is damaged and no longer prints cleanly. The advantage of cutting compared to squeegee grinding is: the rubber does not get hot and melt. You always get the same, defined edge, and virtually anyone can do it. The system is suitable for classic screen printing squeegee blades. It is not suitable for RKS squeegee blades or carbon squeegees. The system is currently located in our warehouse/workshop in 93476 Blaibach. We would be happy to take care of transport, etc. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Hfodpfx Aezyc Riscgjl The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2006, S.C.T. - ASP1020 - screen printing cylinder for UV varnishing Year 2006 Max. size: 1,020 x 740 mm Hjdpfjzx Duyex Acgofl Min. size: 560 x 370 mm Max. varnishing area: 1,020 x 720 mm Control panel Paper weight: 120 – 350 g/m2 Frame format: 1,140 x 1,280 mm Stack height: 700 mm Speed: 1,000 – 3,000 sheets/hour Dual tunnel: IR / UV In production Available immediately

Condition: excellent (used), Year of construction: 2019, EPS 1050 UV TUNNEL: Maximum sheet size: 1050x780 Maximum stack height: 800 Maximum conveyor speed: 45 m/min. Hjdpfx Acjzxrdiogjfl Operating pressure: 6 bar Air consumption: 4 m3/h Maximum power consumption: 20 kW Operating power: 7.5 kW Weight: 950 kg Dimensions: 4250x1700x1100

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Automatic CNC screen printing machine ASP-100LS/CD (K5) | Manufacturer: Oltronik MACHINE OFFERED: Hfodjzwdwrepfx Acgel The ASP-100LS/CD machine is a professional, numerically controlled (CNC) device for multi-color screen printing on cylindrical, oval, and rectangular objects. It enables the execution of multi-color printing cycles (up to 5 colors simultaneously) with UV drying, both for cylindrical and flat printing. A PLC controller with a touchscreen provides precision, repeatability, and ease of programming. TECHNICAL DATA: Manufacturer: Oltronik | Model: ASP-100LS/CD (K5) Year of manufacture: 2005 | Operating hours: 156,865 cycles Control: CNC PLC with touchscreen Squeegee heads: 5 pcs. Drying: UV (for cylindrical and flat printing) Cylindrical printing: Ø32–Ø150 mm (printing height 145 mm) Rectangular printing: 32×32 mm to 105×105 mm Oval printing: 32×32 to 150×150 mm Printing range (2 screens): 410 mm | (3 screens): 220 mm | (4 screens): 125 mm | (5 screens): 68 mm Max. external height of screen frames: 485 mm | Frame profile: 25×25 mm EQUIPMENT: Pneumatic system (air preparation station, manometers, loading cylinders, screen holding cylinders, and squeegee pressure cylinders), electrical system with a control cabinet, operator panel, start pedal, emergency stop button, protective housing. DOCUMENTATION: Complete technical and operating documentation from the manufacturer Oltronik (76 pages).

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) MACHINE OFFERED: The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. Hfjdozwdv Uepfx Acgol BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We are offering this Hebbecker S-LINE screen printing machine in very good condition, manufactured in 2022. Manufacturer: Hebbecker Model: S-LINE Year of manufacture: 2022 Condition: very good Type of machine: screen printing machine Hfodpfx Aozu Nxcocgsl This is a complete set consisting of a carousel specifically designed for tote bags, with an automatic ejector and a tunnel. Electric rotation, pneumatic screen locking, 8 stations/3 printing positions. 1 flash pre-drying unit, 1 pneumatic tensioning system for securing the tote bags. SIEMENS automatic ejector integrated into the tunnel entrance. Purchase value in 2022 - net price €112,000.00 - new condition, very little use. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 153-06SP0610, compressed air connection: 8 bar, Textile screen printing machine with 10 stations and 6 printing units (Made in Germany), with only 454,220 prints, and 2 x Digiflash Rutland intermediate dryers. The machine is fully functional, in good condition, and can be inspected in operation until the beginning of October. Hfedjztqy Sopfx Acgsl • 10 aluminum sandwich pallets 420 x 600 mm • 10 aluminum sandwich pallets 320 x 600 mm • Various squeegees • Power requirements: 3 x 400 V, 50 Hz, 16 A • Digital microprocessor control • Operation via touchscreen, text display optionally in various languages • Screen holder from the side • Pneumatic screen clamping • Double indexing and ½ indexing • Control panel on each printing arm • Registration accuracy 0.025 mm • Adjustable cycle speed • Gap setting Optionally, a Rutcure Master 18 drying tunnel can also be purchased, with a chamber length of 260 cm, belt width of 105 cm, and 18 kW, manufactured in 2007. Price: 2,300 euros (negotiable).

Condition: good (used), For sale: 2 automatic PrintEX screen printing carousels + tunnel + 3 IR flash dryers For sale: a complete set of screen printing machines for textiles from PrintEX. The set includes: 1. Automatic PrintEX 11/14 screen printing carousel 11 colors / 14 pallets 2. Automatic PrintEX 6/8 screen printing carousel 6 colors / 8 pallets 3. Drying tunnel for prints The tunnel has an air-blowing function, making it also suitable for use with water-based inks. 4. 3 IR flash dryers The set includes 3 IR/flash dryers for intermediate drying of prints between colors. The machines have very low usage hours for screen printing equipment. The equipment is robust, industrial-grade, and designed for printing on t-shirts, sweatshirts, bags, and other textiles. The set is ideal for a garment printing company, an advertising agency, or someone who wants to expand their print production. Hfsdpfx Aoztn Elscgel The machines can be viewed on-site. Pick-up in person / transport is the buyer's responsibility. Price: negotiable Please contact me.

Condition: ready for operation (used), Year of construction: 1987, A flatbed screen printing machine ESC is available. Print dimensions X/Y: 1200mm/800mm, max. print format: DIN A0, machine dimensions X/Y/Z: approx. 1550mm/1750mm/1200mm, weight: approx. 550kg. An on-site inspection is possible. Hjdpszq Ecpjfx Acgefl

Condition: like new (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, warranty duration: 12 months, input frequency: 50 Hz, Usable printing format: 100x140. Maximum frame format: 160x120. Vacuum platen adjustment, horizontal/vertical, with millimeter precision. Adjustment of the rear gap (known as Sincoprint) with a knob located on the front of the machine, within easy reach of the operator. 3-position selector: manual, single, and automatic, with a timer to regulate the time at the end of the printing cycle before the printing head rises. Hfodpfxszqyqhj Acgsl Timer for adjusting automatic operation. Two-function foot pedal: left pedal to start the machine, right pedal to activate the sheet vacuum during registration. Adjustment of the squeegee and counter-squeegee speed with a potentiometer.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2025, warranty duration: 12 months, input frequency: 50 Hz, Useful printing format: 150x300. Frame lifting parallel to the printing plane. Printing plane adjustable on all three axes. Lift-O-Mat (device for progressive frame release), continuously adjustable from the operator side. Printing stroke adjustment via magnetic microswitches. Printing speed and ink return adjustable continuously and independently. Extremely uniform squeegee advance in the transverse direction, even at high speeds. Hjdjzqf D Tjpfx Acgofl Micrometric adjustment of the squeegee and blade pressure. Squeegee tilt adjustment. Two operating cycles: single and pulsed, for setup. Printing plane with a honeycomb structure and anodized aluminum coating. Printing plane equipped with a vacuum device with pre-vacuum and blow functions. Quick removal of the squeegee and blade. Pneumatic frame locking system.

Condition: ready for operation (used), Year of construction: 2017, A Systec/ESC 2-color flatbed screen printing system is available. Processes: unwind unit, printing unit 1, intermediate module, printing unit 2, rewind unit. Unwind unit: Systec, intermediate module: Systec, rewind unit: Systec, printing units 1/2: ESC. Max. print format: 300mm/450mm, vacuum table dimensions X/Y: 400mm/600mm, vacuum surface dimensions X/Y: 345mm/465mm, max. frame dimensions X/Y: 500mm/750mm, print material thickness range: 0mm-50mm, working height: 945mm, printing speed: 500mm/s, max. cycle rate: 800pcs/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, unwind roll diameter: 600mm, unwind roll spindle diameter: 3in, vacuum boxes: 3. Machine dimensions X/Y/Z: approx. 7900mm/1400mm/1950mm. Documentation available. An on-site inspection is possible. Hfjdozmymhepfx Acgsl

Condition: used, functionality: fully functional, input voltage: 230 V, Hello, we are offering a used paint shaker/agitator from the German manufacturer Collomix, model VIBA 25. The device is in good condition and fully functional. It is suitable for containers up to 25 kg. The paint is brought into vibration by a shaking motion, which causes it to mix itself perfectly. We have used this system to mix screen printing inks. However, the system can also be used for a wide variety of paints and coatings. The pre-set time of 1, 2 or 3 minutes can be selected using the selector buttons. The system is currently located in our warehouse in 93476 Blaibach, Bavaria. If you have any questions, please feel free to write to us. Hfsdjzmcqispfx Acgjl

Condition: ready for operation (used), Year of construction: 2017, A semi-automatic ATMA flat-bed screen printing machine is offered. Max. print size X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. screen frame size: 700mm/950mm, min./max. screen frame profile height: 25mm/54mm, max. substrate thickness: 120mm, working height: 940mm, screen frame lift: 300mm, min./max. printing speed: 125mm/s/750mm/s, control: PLC. machine dimensions X/Y/Z: 1300mm/1060mm/1600mm, weight: 485kg. Documentation available. Inspection possible by appointment. The terminology flat-bed screen printing machine, vacuum table, screen frame lift and PLC follows established industry usage. Hfedpfxezl Enns Acgsl

Condition: used, Year of construction: 1990, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, working width: 3,000 mm, table width: 1,600 mm, table length: 3,000 mm, Screen printing machine for sale, print size 1600x3000 mm, with a 1600 mm two-section Svecia heat dryer, exposure frame, aluminum frames, and glass. Suitable for printing on metal as well. 3/4 automatic. Hsdpjzlq N Rofx Acgofl

Condition: used, functionality: fully functional, machine/vehicle number: 050526, input voltage: 230 V, overall weight: 40 kg, Hello, we are offering a nice, small Roku Print SD 05 for sale. The system is in top condition and has only been used very little for prototype production. This small system features a vacuum printing table. The height of the printing material can be adjusted using the small hand control unit. All the important parameters, such as printing speeds, flood speed, screen clamping, etc., can be easily entered via the hand control unit. In addition, the system is equipped with an adjustable printing table in the x and y directions, which can also be rotated. This is not a standard feature, but rather a special design with table adjustment. The system is a good alternative for those who need to print small parts and for whom Thieme and ATMA screen printing systems are too large. Hfedpfx Acozll N Segel It is an ideal machine for "small parts printing". The machine requires a standard 230-volt connection and compressed air. If you are interested, we would be happy to demonstrate the system. Please feel free to contact us if you have any questions.

Condition: ready for operation (used), Two Gallus rotary screen printing units for the Arsoma EM 280 with peripheral equipment are available. Printing process: rotary screen printing, roller width, max. screen printing width: 270mm, side register adjustment range: +/-5mm, max. speed: 150m/min. Including various screen rings, welding unit, bonding fixture, mounting plate and trolley. Documentation available. An on-site inspection is possible. Hsdpfx Acozk Nbvegofl

Condition: used, Year of construction: 1989, functionality: fully functional, input voltage: 380 V, total length: 10,210 mm, total width: 2,717 mm, year of last overhaul: 2025, input current: 12 A, conveyor belt width: 1,700 mm, product height (max.): 1,370 mm, input frequency: 50 Hz, table width: 1,828 mm, table length: 1,500 mm, We offer this used SVECIA SM Svecia SM Automatic large format, year of construction 1989. Manufacturing year: 1989 year Type: SM Serial number: 40-90257 Wiring diagram: 40E1864 Hedpfszgfh Rox Acgsfl Voltage: 380 V Current: 12 A Control voltage: 220 V Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1998, Semi-automatic, angle-opening screen printing machine THIEME 510. Hfsdpoy Ugqlofx Acgjl Printing format 55 x 75 cm, electro-pneumatic machine with a height-adjustable vacuum table (up to 40 mm printing stock height), table format 80 x 95 cm, vacuum area 58 x 76 cm, max. screen frame format 100 x 110 cm, with squeegee control, electronically adjustable squeegee and flood bar speed, steplessly adjustable squeegee stroke. Easy screen insertion from the front, pneumatic screen frame clamping, multi-pass printing, registration pins, equipped with 3 sets of printing and flood bars. Requires 400V and compressed air at 6 bar, used, year of manufacture: 1998, very good condition.