Radviliškio masinu gamykla

Year of construction: 2019, Condition: excellent (used), Prey SEM hose binding machine from 2019 in good, fully functional condition. The PREY hose binding machine – SEM for short – is the most compact of its kind and is offered here as a unit with a mobile table. Width: 500 mm Length: 550 mm Height: 530 mm Itslhewlil Tjccqtjg Weight: 75 kg Power supply: 230 V AC / 50 Hz / 0.25 kW Hose sizes: A / B / C / D (optionally F) Unlimited hose lengths Hose types: all known materials Functions: Binding Operating mode: One-person operation Installation type: Mobile #8372

Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: SPR210, The SPR-210 semi-automatic flat labeling machine is suitable for labeling products with flat surfaces, such as paper boxes, plastic bags, bottle caps, pouches, and other packaging. The machine is widely used in industries such as food processing, cosmetics, medicine, electronics, office supplies, and others. For the following product sizes: Length: 20 mm - 500 mm Itjlewixtzshccqtsg Width: 40 mm - 400 mm Height: 10 mm - 300 mm

Condition: excellent (used), Year of construction: 2018, MPS Mess-& Prüfsysteme 15kV Typ WPP15 Partial Discharge Alternating Current Testset Iteljwhv T Nshccqteg S/No.218 027. Asset No.ETI-HW-021 (02/2018).

Condition: excellent (used), OPAL-RT Technologies OP5707XG-4 Series RCP/HIL FPGA-based real-time simulator Itelhowhv A Reccqtjg

Condition: like new (used), Functionality: limited functionality, power: 90 kW (122.37 HP), overall weight: 2,000 kg, empty load weight: 2,000 kg, operation weight: 2,000 kg, Year of construction: 2019, operating hours: 16 h, Selling a Schwing hydraulic power unit with a 90 kW motor. Year of manufacture: 2019 Operating hours: 16 hours 350 l/min Data sheets and instructions can be sent in advance. Viewing possible at any time by appointment. Sale with invoice possible! Untested used/as-is condition, therefore no guarantee, warranty, or exchange. Islhccswhiqusqtetg

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. Ielhewhdnhoccqtetg The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: used, Functionality: fully functional, Year of construction: 1969, Equipment: air conditioning, hydraulics, FIEBIG S3000 floating dredger for sale with the associated water belt system 9pcs ~270m. Itjlhccjwhcxloqtjg Dredging depth 25 m Power: 58kW Operating personnel: 2 people The floating dredger underwent a complete electrical system and PLC control renovation in 2019, and a complete hydraulic system renovation in 2022. Can be viewed during operation.

Condition: excellent (used), Functionality: fully functional, Complete French Fries Production Line (Hydrocutting) Multi-head weigher Brand: Multiweigh Model: MW XV-14-6.0-8.0-L Itslhcewg Huzocqtjg Year of production: 2020 Voltage: 400V 50Hz Weight: 1540 kg Brush peeler Brand: Kiremko Type: HCUSDWWND150 Year of production: 2009 Voltage: 400V 50Hz Industrial French fries slicer Brand: Kiremko Type: NOVUS 1200B Year of production: 2021 Voltage: 400V 50Hz Weight: 2500 kg Pre-processing machine Brand: Marcelissen Year of production: 2022 Drum peeler Brand: Kiremko Type: MTBRP Year of production: 2009 Voltage: 400V 50Hz Precision slicer Brand: FAM Type: 7407 Power: 0.75 kW Voltage: 400V 50Hz Weight: 140 kg Processing/transporting machine Brand: Kiremko Type: OSS12142030 Year of production: 2005 Voltage: 400V 50Hz Weight: 2500 kg

Year of construction: 2021, Condition: new, Functionality: fully functional, reconditioned High temperature Jigger 1200/2000 with brand new drive and process technology. Itolswdwf Eohccqtjg

Year of construction: 2021, Condition: new, Functionality: fully functional, machine/vehicle number: 1000, new build in 2021 with only 150 running hours. The dredge was commisioned and later stored. Islhccowcffksqtetg

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, total height: 1,080 mm, total length: 3,000 mm, Glycol Autoclave Pressure vessel made of stainless steel, 1.4301 Length: 3.0 m Inner diameter: 1.08 m Islewbz I Sjhccqtjtg

Condition: used, Year of construction: 2007, Functionality: fully functional, Specifications – KARA KW430 Biomass boiler Brand & Type: KARA KW430 Year of construction: 2007 Power: 499 kW Max. temperature: 110°C Fuel: Wood chips Applications: Heating of large buildings (factories, swimming pools, greenhouses), industrial process heat and heating of drying rooms Key features: Efficient combustion: Advanced combustion chamber with stable flame and low emissions Durable: Built for years of use with low operating costs Versatile: For both space heating and process heat Specifications – Grainas Conveyor Belt (Model 450) Ijlswa Tfgohccqtjtg Make & Type: Grainas Wood Systems 450 Year of construction: 2018 Type: Ladder-style inclined conveyor Application: Specially designed for transporting wood chips and shredded biomaterial to silos or storage Key features: Efficient internal transport: Ideal for feeding to storage or feeding biomass plants Industrial quality: Robust construction for continuous use Low maintenance: Reliable design with minimal downtime Location & Viewing The installation is located in Wieringerwerf (NL). Viewing and dismantling on location is possible in consultation. Price information Set price (complete): €5,000,- For sale separately: KARA boiler: €4,000,- Grainas conveyor belt: €2,500,- Interested or have questions? Feel free to contact us for more information or to schedule a viewing.

Year of construction: 2022, Condition: good (used), Serial number 11261, 6-piece set - Subject to prior sale - Ijlewazp Tshccqtetg +++ Please note: This machine is part of an online auction! +++

Year of construction: 2004, Condition: ready for operation (used), Window turner Backhus 16.36 2004 in very good working condition Itolewagf Tshccqtjg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, total length: 15,000 mm, inner dimension height: 900 mm, inner dimension length: 535 mm, inner dimension width: 390 mm, total height: 1,800 mm, total width: 1,200 mm, input voltage: 220 V, conveyor belt width: 535 mm, SMT line for PCB manufacturing. Works as new, full set with feeders. In video it is shown how it works. If necessary there is 3D 3D AOI machine additionally and Wave solder machine. All the setup is shown in pictures. can be bought machines separately, prefer to sell it as full set. Itolhccqjwab Icoteg Trainings on machines can be held (must be separately agreed)

Year of construction: 2018, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: SP-SL-00229, Koh Young 3D Inline SPI Sale exclusively to businesses. Itolhccqsv Uzvwetog All information and content are provided without guarantee. Errors and changes excepted. We reserve the right to change, update, revise, or delete information at any time.

Year of construction: 2021, operating hours: 360 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 124921T4092C, Tabarelli T4092c material handler equipped with a 500L GUSELLA BAKKER grapple. Deutz 95kW (130hp) 4-cylinder 3.6L diesel engine. Common Rail Injection - Turbocharged - Stage 5 emission standard. Fan reverse flow - 170L fuel tank. 24V electrical system - 2x 100Ah batteries. Variable displacement axial piston pump (Kawasaki) - 220L/Min / 320B. Load-Sensing control - 270L hydraulic tank capacity. Safety valves for boom and arm cylinders. 4WD hydrostatic travel - 2 speeds (0 to 4 km/h and 0 to 14 km/h). Axles with epicyclic reduction gears - oscillating front axle with lock. 10.00/20 double wheels with spacers. Front blade - 2 rear stabilizers - 2.50 m wide. Rotation by hydraulic motor and reduction gear. Swing ring with internal teeth, 1 to 7 rpm. Hydraulically raised cab - Steering wheel. Ijlhcov Untiscqtjtg Heating and air conditioning - Protective grille - Work lighting. Adjustable seat with suspension - Radio - Dashboard on left console. Controls by single-lever joysticks integrated into the seat. Travel controls by pedals. Electric controls for auxiliary hydraulic functions. Centralized 12-point automatic lubrication system (arm and turret).

Year of construction: 2011, Condition: used, Functionality: fully functional, machine/vehicle number: 2011140 0119, Baler for small quantities of hay and straw. Pressing force 160 kN Specific surface pressure 60 N/cm² Bale format 400 x 400 mm Filling opening 1200 x 330 mm Channel length 1400 mm Filling volume 0.3 m³ Thickness output 40 m³/hour Bale size 400 x 400 x 400-800 mm Hydraulic equipment: Rexroth/Parker Electrical equipment: Siemens S7-300 CPU312 Itelhccqsv Ub Aksteg Display OP-77B Automatic control with pump shut-off mode Automatic bale channel control Raspe 2V cord binding system Basic hopper with inspection door Weight approx. 3200 kg Dimensions approx. 5300 x 1100 x 2400 mm Paint finish RAL 5007

Condition: like new (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 10.0531.014, We sell laser source with few hours of use for precision cutting. For any technical requests contact Fratelli Gilardi SA at 0041 91 785 90 50. Itjlhcjv S Dz Recqtsg

Condition: excellent (used), Year of construction: 2005, input voltage: 380 V, pressure: 34 bar, power: 156 kW (212.10 HP), frequency: 50 Hz, SIPA SFR8 Neck:38mm bericap h=16.5mm Blowing pressure:34bar Iolev Rd Arshccqtetg Capacity :10.000 b/h Air consumption 882m³/h Installed pOwer 156kW

Condition: excellent (used), The machine was used for reinforcing acrylic inserts, can be used to spray different PU materials. Very good condition. Selling the whole set: SR20G machine, spraying gun, oven, chiller, conditioner, tank. Itelsv Rb Dgjhccqtjg

Year of construction: 2007, Condition: excellent (used), Functionality: fully functional, Wichelhaus AT Jigger Type Vario Line Roller width 2000 mm Fabric width 1800 mm Bullet diameter 1200 mm Itjlhcjv N Dmnjcqteg Location: North Rhine-Westphalia Year of manufacture 2007, excellent condition, only used in schools

Year of construction: 2016, operating hours: 1,420 h, Condition: used, For sale self-propelled machine for mounting and transporting glass or flat surfaces up to 550 kilograms with a maximum reach of 4 meters. The device is ideal for working in shopping centers or places where it must be quiet and there must be no exhaust fumes. The lift was purchased from the first owner in Denmark who deals with the installation of glass in prestigious companies on a daily basis. We offer transport to the indicated address, more information from the seller by phone. Weights and dimensions: Transport dimensions: 2.53x1.17x1.64 Tires in very good condition Size: 16X6.50-3 Current weight: 1500kg 4 vacuum suction cups in total Detailed information in the last photo. NOTE! The price is net and applies to companies or for Export, of course we prepare special offers for private customers, just ask. ----- Ijljv Ni Htohccqtetg Dear Customer! If you want to buy a DELICATE Equipment, then WE INVITE YOU TO US. We provide a technical guarantee with Assistance for most of them. Vehicles are checked before sale and as soon as we notice any fault or defect, we repair it ourselves. We ourselves will be grateful if after inspection you point out to us that something is not working. At the same time, be aware that long-term used equipment often has its own features or defects, which we are not able to repair all of. That is why we do not write in our advertisements such phrases as most sellers such as: "showroom condition" or "does not require any financial contribution", because it is simply not true, and new cars are in fact available in the showroom at a price often several times more expensive. ————— THIS ANNOUNCEMENT IS FOR INFORMATIONAL PURPOSES ONLY AND DOES NOT CONSTITUTE AN OFFER IN THE MEANING OF ART. 66, § 1. OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS OR INCOMPLETE INFORMATION CONTAINED IN THE ADVERTISEMENT OR OUT-OF-DATE ADVERTISEMENT

Year of construction: 2021, operating hours: 1 h, Condition: used, Functionality: limited functionality, Pirolization system, disassembled. Trasportation is possible with normal truck. Iolhsv Nix Noccqtstg

Condition: ready for operation (used), Year of construction: 2020, Functionality: fully functional, The first version of the production plant was built in 2014 by FC Sonderkonstruktions GmbH. The plant then initially produced prefabricated wall elements made of clay bricks/stones. In 2020/21, the plant was converted to the current stone size and lightweight concrete blocks by Keller HCW GmbH and set up at the current location. Extensive changes and therefore a large number of new parts were installed. The total investment volume in 2021 was just under 3.5 million euros. The plant was in operation until November 2023, when it was shut down due to the factory closure. This means that the vast majority of the elements in the plant are as good as new. The plant is designed and built for use in the construction industry. It is built to produce prefabricated wall elements. The following operations can be carried out: -transporting shipping packages (stone goods on pallets) -unstacking shipping packages -stacking shipping packages -transporting shipping pallets -transferring bricks / stones Itelsv D Rl Tehccqtjg -transporting rows of bricks / stones -grouping rows of bricks / stones -drilling rows of bricks / stones for support anchors -transferring rows of bricks / stones onto transport pallets -mortaring rows of bricks / stones -lowering transport pallets covered with rows of bricks -moving transport pallets covered with empty rows or with wall elements The system is operated via two centrally set up control stations, it is designed for production 50 weeks a year, with 5 working days each and two shifts, each with 8 hours per shift. The machine is currently designed for stones with a width of 15CM or 36.5CM. With the current planning, up to 225,000 square meters can be produced per year. (Theoretical calculation at maximum capacity, 16 hours / two shifts, 5 working days, 50 weeks) The maximum that can currently be achieved for each element is: -6500MM in width -3500MM in height Further information is available on request!