Prime engineering

Condition: used, Year of construction: 2006, Sodick AQ900L Premium Write-Cut EDM Machine, Serial No. 0006 (08.2006) LW33W Control, Travels: X = 900mm, Y = 600mm, Z = 400mm, U & V have the same displacement as X & Y, Max Workpiece Dimensions 1200 x 900 x 400mm Nedpfxozwnmde Aarewk Please Note: This Machine is located in Cheshire, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Please Note: There is a Strict Clearance date for this Auction of 16th September 2026.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, total height: 2,600 mm, total length: 1,940 mm, total width: 2,300 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, overall weight: 3,460 kg, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER hand box for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg Njdpezwl R Hofx Aarewk The machine will be cleaned, overhauled, and tested at our facility after receipt of your order. We would be happy to perform a customized test cut for you. You will receive a warranty of 6 months on all machine parts. We would also be happy to offer commissioning and training.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table load: 1,000 kg, positioning accuracy: 0.001 mm, FOR SALE: 2017 Model Sodick AG600L Wire EDM Machine - Full Equipment & High Performance Machine Condition: Flawless, Problem-Free, Very Low Operating Hours Model Year: 2017 Power and Generator Technology: Advanced SPW (Smart Pulse) Generator: Thanks to Sodick's special discharge technology, it provides high-speed cutting while saving energy. High-Speed ​​Cutting Circuits: Reinforced generator system that increases performance by 30%, especially in thick parts and hard metals. Extra Finishing Circuit: Optimized precise energy output to achieve very low surface roughness (Ra below 0.78 µm). Equipment and Peripherals: Nwedjzwd A Uepfx Aarok High-Capacity Cooling Unit (Chiller): Prevents thermal expansion by keeping the dielectric water temperature constant during precise cuts and maintains micron accuracy. Advanced Filtration System: Uninterrupted production with a long-lasting and high-flow filtration tank. Automatic Water Level Control: Automatically adjusts the tank level according to the workpiece height. Power Supply (UPS/Regulator): Integrated protection systems that protect sensitive electronics against voltage fluctuations. Technical Summary: Drive System: Maintenance-free, linear motors (X, Y, U, V) with a 10-year precision guarantee. Axes: 600 x 400 x 350 mm working area. AWT: "Super Jet" high-speed underwater automatic wire threading unit. Control: 15" Touchscreen LN2 CNC unit. Description: The machine was used in one of Türkiye's leading precision mold shops, solely for ejector and insert cutting. It was not used in subcontracting. It is a ready-to-use machine with no accidents or need for revisions, and has been maintained regularly.

Condition: used, Year of construction: 2006, FANUC ROBOCUT ALPHA- OiC WIRE ERODING MACHINE YEAR: 2006 X STROKE: 320.0mm RAPID: 900mm/min Y STROKE: 220.0mm RAPID: 900mm/min Z STROKE: 255.0mm RAPID: 900mm/min U STROKE: 120.0mm RAPID: 450mm/min V STROKE: 120.0mm RAPID: 450mm/min MAX. TABLE WEIGHT: 500.0 kgs COMPLETE WITH.... CHILLER SYSTEM COOLANT FILTRATION SYSTEM TRANSFORMER RENISHAW MACHINE MANUALS Njdpfszv En Ajx Aarewk

Condition: used, erosion machine Erosion machine Agie Nwjdpfxszv D Uue Aarsk Agietron Integral 3

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, number of axes: 3, This 3-axis Sodick SL600Q wire EDM machine was manufactured in 2014. It features X/Y/Z travel dimensions of 600 x 400 x 250 mm, ideal for precise cutting applications. If you are looking to get high-quality EDM capabilities, consider the Sodick SL600Q machine we have for sale. Contact us for more information. Nsdpfxszvv Dno Aarewk

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 510 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, controller manufacturer: MITSUBISHI, number of axes: 5, This 5-axis Mitsubishi FX 20 wire edm machine was manufactured in 1999. It offers precision and efficiency for complex wire EDM tasks. Consider the opportunity to buy this Mitsubishi FX 20 wire edm machine. Contact us for more information. Njdpfxozvvcde Aarewk

Condition: ready for operation (used), Year of construction: 2011, Fanuc RoboCut Alpha 01E Year 2011 X-axis travel is 600 mm Y-axis travel is 400 mm Z-axis travel is 300 to 310 mm. Workpiece Capacity: Accommodates pieces up to 1050 mm long, 820 mm wide Weighing up to 1,000 kg. Control Unit: Uses the advanced Fanuc Series 31i-WA CNC system. Features: Includes automatic wire threading (AWF), reliable re-threading, integrated fluid cooling, and Nwedpfezvlgrjx Aarok precision twin-servo wire tension control.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 2,790 mm, total width: 2,020 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, overall weight: 4,440 kg, warranty duration: 6 months, tank capacity: 1,000 l, Equipment: cooling unit, GF AgieCharmilles CUT E600 Year of manufacture: 2019 Wire erosion machine with automatic wire threading Travel ranges (X/Y/Z): 600 x 400 x 350 mm Travel ranges (U/V): +/- 50 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 1030 x 800 x 350 mm Max. workpiece weight: 1000 kg Excellent surface quality for hard metal/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 and 0.25 mm Nsdpfx Aezvf Ddjarjwk User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 2020 x 2790 x 2320 mm Total weight without dielectric fluid: 4440 kg The wire erosion machine will be cleaned, serviced, and thoroughly tested by us after the order is received. We can also perform a test cut or a live demonstration beforehand. Commissioning and training can also be carried out by us. Optionally, we offer the following: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Automatic wire threading Nedpfx Aajzu N Absrswk

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Njdpfozuvyaex Aarewk Year of manufacture: 2014, available from the end of August.

Condition: good (used), Year of construction: 2016, Machine parameters: Travel in the X, Y, and Z axes: 900 x 900 x 900 mm Njdoztydtjpfx Aarjwk Description: The machine is in good working condition, and a test run can be arranged upon prior agreement.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 Nwjdpfxszr Uuqj Aarjk - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Condition: excellent (used), High-quality FANUC wire EDM machine in excellent condition. The machine is well-maintained, ready for operation, and suitable for precise wire EDM applications in tool, mold, and precision machine manufacturing. Manufacturer: FANUC Model: ROBOCUT α-1iD Type: A04B-0320-B001 #E5 Machine No.: P089D1671 Year of Manufacture: 09/2008 Njdozrzzdspfx Aarowk Control: FANUC Series 310iS-WA Machine Type: CNC Wire EDM Machine X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U-axis: 200 mm V-axis: 200 mm Rapid traverse X: 900 mm/min Rapid traverse Y: 900 mm/min Rapid traverse Z: 900 mm/min Rapid traverse U: 450 mm/min Rapid traverse V: 450 mm/min Max. workpiece weight: 1,000 kg Machine weight: 3,000 kg Power supply: 200 V AC, 3-phase, 50/60 Hz Connected load: 13 kVA Automatic wire threading Full immersion machining Suitable wire diameter: 0.10–0.30 mm Upon request, we will gladly send you a video.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Charmilles Robofil 440 CCS Year of manufacture: 2011 Charmilles Millenium control system Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Nwsdpfozruvusx Aarok Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2540 x 2240 mm Total weight of the system: 3300 kg After receiving your order, we will clean and completely overhaul the machine and test all functions. You will receive a 6-month warranty on the machine. We would be happy to offer you the commissioning of the machine.

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, Charmilles Robofil 440 CC Year of manufacture: 2004 Charmilles Millenium control system Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. Taper angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Nwedpfozrur Nox Aarok Dimensions of the complete system: 2600 x 2810 x 2240 mm Total weight of the system: 3300 kg The machine has already been tested and serviced by us. Upon request, we offer you the following services: - Commissioning of the machine at your site - Control system training - Accessories such as coolers and clamping devices

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Nedpszrfpxofx Aarjwk Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: W150474, workpiece weight (max.): 1,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 420 mm, workpiece height (max.): 420 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,000 mm, overall weight: 6,000 kg, Equipment: cooling unit, documentation/manual, The Makino U6 H.E.A.T. is a high-precision wire EDM machine for machining tool steel, hard metal, titanium, Inconel, and other difficult-to-machine materials. It is specifically designed for tool and die making, aerospace, medical technology, and precision manufacturing. Key technical specifications: Travel ranges (X/Y/Z): 650 × 450 × 420 mm U/V axes: ±75 mm Max. workpiece size: 1,000 × 800 × 400 mm Max. workpiece weight: 1,500 kg Available wire diameters: 0.10 / 0.15 / 0.20 / 0.25 / 0.30 mm Work table: 910 × 710 mm (hardened, usable on four sides) Special features of the H.E.A.T. version: Njdpfx Aozq Tc Doarewk *H.E.A.T. (High Energy Applied Technology) for significantly higher cutting speeds under difficult flushing conditions. *Two independent high-performance flushing pumps for higher pressure and better removal of erosion particles. *Four-stage filter system with air vent for easier filter replacement. *Split-V wire guide, which is much more durable than conventional round wire guides and requires less maintenance. *Hyper-i control with 24" touchscreen, mouse, and keyboard, as well as integrated manuals and training videos.

Condition: excellent (used), Year of construction: 2003, Sodick AQ535L wire EDM machine Year: 2007 5-axis Technical details: X-axis travel of 550 mm Y-axis travel of 350 mm Z-axis travel of 300 mm Nwedjzqzznopfx Aarok U/V axis: 80/80 mm Work table size is 790 x 500 mm, Maximum workpiece weight capacity of 800 kg Work tank dimensions (W x D): 1100 x 720 mm Distance from floor to table top: 1005 mm Workpiece capacity: Maximum workpiece height: 290 mm Wire system: • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g • Max wire feed speed: 250 mm/sec • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, TECHNICAL DETAILS X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm U-axis: 550 mm V-axis: 350 mm Nwjdpfx Ajzpxg Soarsk Machining Taper: ± 30° Automatic wire threading and re-threading: Yes Maximum workpiece dimensions: 1,200 × 700 × 400 mm Control and Dielectric Fluid CNC control: CHARMILLES Dielectric fluid tank: 1,200 l Filter system: Cartridge filter MACHINE DETAILS Machine weight: 3,500 kg EQUIPMENT - Cooling unit

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Progress VP3 Year of manufacture: 2013 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Nwodpfx Aaszlxrajrsk Maximum workpiece weight: 400 (in the bath) / 800 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER hand box for comfortable setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be cleaned and overhauled after receipt of your order. You will receive a 6-month warranty on all machine parts. We would also be happy to offer commissioning and training.

Condition: used, Year of construction: 2002, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 2,100 mm, total width: 2,710 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, For sale is a well-maintained Mitsubishi FA20 wire erosion machine. Nsdpfx Aajzln Tgsrewk

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101D1902, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 300 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 775 mm, Equipment: documentation/manual, We are selling a wire erosion machine. Condition: used, fully functional Technical specifications: Manufacturer: FANUC Model: Alpha 1iD CNC control: FANUC 310i-WA Operation: Touchscreen; Editor Manual control panel: yes Travel ranges: X 600 mm × Y 400 mm × Z 310 mm U/V axes: ±100 mm (total travel of 200 mm) Wire diameter: 0.10–0.30 mm Max. workpiece size: approx. 1,050 × 775 × 300 mm Automatic wire threading (AWT) Machining under water; full immersion machine Ethernet and USB connection The FANUC Alpha 1iD offers reliability, very good cutting quality, and low maintenance requirements. High-quality clamping devices, Hirschmann System 4000, can also be included. Njdpfx Aszlg Agoarswk The machine can be inspected and tested by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2021, SN: 01CS4056, Gewicht 5900 kg, Arbeitsbereich 1.250 x 1.020 x 505 mm, Tischbelastung max. 3.000 kg, Steuerung, Schalt-/Steuerschrank, Nullpunkt-Spannsystem, m. Zubehör Nodpfx Aaozlfa Rerjwk Der Preis versteht sich als Netto-Ab-Werk-Preis. Demontage, Hebearbeiten und Verladung erfolgen auf Kosten und Risiko des Käufers."

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Nsdpfjzlc Tbjx Aarswk