K.T.M. Sp. z o.o.

Condition: like new (used), Year of construction: 2019, operating hours: 300 h, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32) Technical ParameterSpecification and Values Hsdpfx Aozgq Szjhnofi Manufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 Series Equipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid) Bowl Inner Diameter305 mm Bowl DesignFlat-cone design with an extended length (Extended L/D ratio) Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration) Maximum Solids Density2.6 kg/dm³ Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake) Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD) Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mm Total Weight (Complete Skid)Approx. 2500 kg Lubrication SystemAutomatic centralized grease lubrication for main bearings Construction MaterialsHigh-grade duplex stainless steel (all product-contact areas) Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edges II. Liquid Discharge Under Pressure System Unlike standard models with gravity discharge (where the liquid falls freely into a collection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is located. Kinetic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary disk. Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen. Electrical cabinet with frequency inverters and PLC (Siemens) with an access code for modifying the parameters, including factory documentation.

Condition: used, Year of construction: 1995, functionality: fully functional, Max. speed: 3,500 rpm. Drum diameter: 430 mm Electric drive: 11 + 37 kW Weight per machine: approx. 3,000 kg Hedpfezca Ufsx Ahnefi including accessories, spare parts, and documentation including polymer system Was in operation until April 2026.

Condition: good (used), Year of construction: 2019, Pieralisi FP600 RS-M decanter centrifuge, 2-phase decanter centrifuge, 15 kW drive, max. drum speed 4100 rpm, equipped with backdrive with 7.5 kW drive, scraper for solids with 0.25 kW drive, product temperature min. 5 °C and max. 100 °C, excl. switch box, incl. stainless steel control box, dimensions 2550 x 1050 x 1390 mm (lxwxh), weight 1510 kg, including various spare parts Hfsdpfx Aey Uvp Dohnoi

Condition: used, Year of construction: 2000, Name: Used Industrial Decanter Hfodpfoy Ui A Rsx Ahnsi Manufacturer: GEA Westfalia Type: SD0815 Year built: 2000 Max. bowl speed: 3.000 rpm Inner diameter drum: 500 / 245 mm Interior drum length: 1.466 mm Material: Stainless steel Dimensions: L 3.045 x W 1.100 x H 1.695 mm Empty weight: 2800 kg Technical doc.: Yes Accessories: A control cabinet Message: The used industrial decanter was inspected annually, and the drum was removed every two years. Condition: Second hand Price: By request

Condition: like new (used), Year of construction: 2022, operating hours: 80 h, functionality: fully functional, inner diameter: 220 mm, overall weight: 1,250 kg, space requirement width: 950 mm, space requirement length: 2,600 mm, space requirement height: 900 mm, rotational speed (max.): 5,054 rpm, empty load weight: 1,250 kg, Equipment: documentation/manual, rotational speed infinitely variable, The 9 Inch Decanter Centrifuge is a compact centrifuge designed for industrial applications. The centrifuge bowl measures 9 inches (220mm) in diameter. Due to its compact design, it is popular for applications with small throughput or limited installation space where solids and liquid separation is required. It is also considered an ideal choice for laboratory testing with decanter centrifuges. The GN 9 inch decanter centrifuge is available in three variants: fixed gear box drive, fully hydraulic drive, and variable frequency drive (VFD). CENTRIFUGE SPECIFICATIONS Model: GNLW224G-VFD Drive Type: Speed control by variable frequency drive (VFD) Drum Diameter: 220 mm (9 inches) Drum Length: 924 mm (36.4 inches) Maximum Speed (overload): 5054 rpm (3200 G) Hedpfx Aey Sla Hshnsfi Typical Speed (overload): 0–4500 rpm (2492 G) Maximum Capacity: 130 l/min Typical Capacity: 100 l/min Dewatering Performance: 1–2 m³/h Main Motor: 11 kW Secondary Motor: 5.5 kW

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, inner diameter: 365 mm, wall thickness: 10 mm, rotational speed (max.): 2,900 rpm, The GEA Westfalia Separator CA 365-03-00 is a high-performance, three-phase decanter designed for the efficient separation of liquids and solids. With a drum diameter of 354 mm and an extended drum length, this model offers optimized separation performance. DRUM AND HOUSING DESIGN The decanter drum is configured in a flat-cone design, enabling effective phase separation. The housing is manufactured in a standard design, facilitating integration into existing systems. Hsdpfjy H Ixuex Ahnofi LIQUID DISCHARGE Liquids are discharged with the light phase unpressurized and the heavy phase under pressure. This functionality ensures reliable and continuous removal of the separated phases. DRIVE TYPES The drum is driven via a belt drive, while the screw is driven by a gearbox. These drive types provide stable and efficient decanter operation. The GEA Westfalia Separator CA 365-03-00 provides a reliable solution for the separation of liquids and solids in various applications. plus GEA WESTFALIA SAMR 5036 CENTRIFUGE CLARIFIER FOR A COMPLETE LINE FOR OILS. The units can be sold separately or as a complete line. ?v=nv23KAJFewE

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, overall weight: 2,000 kg, rotational speed (max.): 4,700 rpm, total height: 1,500 mm, total length: 3,300 mm, total width: 870 mm, power: 22 kW (29.91 HP), TECHNICAL DETAILS Drum diameter: 340 mm Maximum drum speed: 4,700 rpm g-factor: max. 4,198 g MACHINE DETAILS Main motor power: 22 kW Secondary motor power: 11 kW Motor operation: Frequency converter Drive system: Summation drive Inlet and outlet connections: DIN 11864-2 DN40 / DN25 Dimensions & Weight Dimensions (L x W x H): 3,300 x 870 x 1,500 mm Weight: 2,000 kg EQUIPMENT Temperature sensors on both drum bearings Hjdey Hiv Uepfx Ahnofi Level monitoring for gearbox oil and oil-air lubrication Pressure sensor for oil-air lubrication Vibration monitoring: continuous monitoring of drum bearings on both sides Speed monitoring via proximity sensors Further configuration details can be found in the attached document.

Condition: used, System: Tricanter, 3-phase decanter, three-phase centrifuge Flottweg Z4D-4/441, used Year of manufacture: 1998 Bowl diameter: approx. 420 mm Max. rotational speed: 3500 rpm Sediment density: 1.8 kg/dm³ Application: This powerful Flottweg three-phase decanter centrifuge is specifically designed for the continuous separation of solids and two liquid phases. Compared to standard decanters, this system offers significantly enhanced process capabilities, particularly when handling complex media. System: Complete skid-mounted unit Equipment: Flottweg three-phase decanter - electric drive unit - pump system - piping & valves Hodjy Eyf Djpfx Ahnefi - maintenance platform - complete skid assembly Typical applications: Oil/water separation - food industry (e.g. vegetable oils) - chemical industry - recycling & environmental technology - emulsion and sludge treatment

Condition: used, Year of construction: 2005, Name: Sludge dewatering centrifuge used Manufacturer: Huber Type: RoD 1500 Year built: 2005 Hfjdpfx Ahjy Edfbsnei Driving force: 18,5 kW Throughput m³/h: 12 m3/h Permissible sediment density: 1,2 kg/dm³ Max. bowl speed: 4000 rpm Inner diameter drum: 365 mm Material: Stainless steel Dimensions: L 2800 x W 1000 x H 1100 mm Empty weight: 3000 kg Technical doc.: Yes Message: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulics B/C 7.5 -16 Z HP Accessories: Control cabinet and a hydraulic system Condition: Second hand Price: On demand

Condition: excellent (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, System: Decanter centrifuge as a mobile, fully equipped dewatering unit housed in a container Condition: Used/demo machine, only 500 operating hours Type: Flottweg Z3E-4/451 Year of manufacture: 2018 Hfsdpfx Asy Avtfjhnoi Max. bowl speed: 5250 rpm Standard wear protection: 8° cone Differential: 1.5–29 min-1 Torque: 2750 Nm System: The "all-purpose" Flottweg Z3E-4/451 is a high-performance two-phase decanter, designed for the separation of solids and liquids. ROBUST DESIGN for separating various types of sludge, such as manure, digestate, industrial sludge, wastewater treatment plant sludge and more.

Condition: used, Year of construction: 1991, Flottweg three-phase decanter, Z4D-3/441, last used in a fruit juice plant. Inner drum diameter: 420 mm Inner drum length: 1245 mm Drum wall thickness: 10 mm The medium to be separated is fed into the hollow center axis of the decanter. Centrifugal force causes the solids to collect on the drum shell. A cylindrical-conical screw conveyor transports the ring of solids to the discharge openings, where it is ejected into the solids housing. The two liquid components separate according to their specific density and form two hollow liquid cylinders. The diameter of the liquid rings can be adjusted using a peeling disc and overflow weir. One of the two phases is discharged without pressure and one is discharged under pressure via the paring disc. The moisture content of the solids and the purity of the liquids can be controlled by: - Varying the phase separation discs and paring diameter - Decanter speed - Screw speed Additional title: 3-phase decanter Max. bowl speed: 4000 r/min Max. sediment-density: 1 g/cm³ Max. ambient temperature: 100 °C Mass moment of inertia: 15.5 kgm2 with an empty drum Weight: 2250 kg Hfjdpoyr Iccefx Ahnei Material: housing from stainless steel 1.4301 (AISI 304); drum made of high-strength cast stainless steel 1.4463 Position: free standing Base construction: Horizontal decanter drum in steel frame, on square tube frame with dome feet Features: Base with rubber mountings, electric motor (Loher 180 M, 22 kW)

Condition: used, Year of construction: 1993, Manufacturer: Guinard Centrifugation (Andritz) Model: D5LP50HBIL Year : 1993 Type: Decanter / centrifugal separator   Previous use: sludge Nominal speed: 2700 rpm - Maximum: 3200 rpm Nominal diameter : 520 :mm Hfedpjx R A A Aefx Ahnei Power: 45 KW   Output extraction / pumping system Inspection report 12,000 H : available (29/01/2021)

Condition: used, Year of construction: 1994, functionality: fully functional, Item: AS-10177 – Alfa Laval Decanter For sale: Used, 5× Alfa Laval Decanter Centrifuges NX 418 S-31G (Year 1994) with valve and piping modules Manufacturer: Alfa Laval Separation A/S (Søborg, Denmark) Model: Alfa Laval Decanter Centrifuge – Type NX 418S-31HS Description: High-quality Alfa Laval decanter centrifuge, manufactured in Denmark. Complete unit includes Flender / ATB Loher 37 kW main drive motor, electrical control cabinet, stainless steel base frame, and integrated pipework. Equipment is in very clean condition, previously used in food processing applications. Technical data: Hodpfxoxqga Ae Ahnsfi - Manufacturer: Alfa Laval Separation A/S, Denmark - Model: NX 418S-31HS - Construction: Stainless steel - Main drive: Flender / ATB Loher, 37 kW, 1470 rpm, 380 V, IP55 - Drive: Belt-driven main motor - Mounting: Stainless steel base frame - Control: Electrical control panels and valve system included - Condition: Used, in very good working order Performance / Capacity: - Dairy / whey / milk solids: 5,000 – 10,000 L/h - Food / beverage (juice, yeast, starch): 6,000 – 12,000 L/h - Industrial / sludge applications: 3 – 8 m³/h (dependent on solids content) - Bowl diameter: 418 mm - Bowl speed: up to approx. 4,000 rpm - Max G-force: approx. 4,000 × g Applications: Ideal for dairy, food, beverage, starch, chemical, and industrial wastewater separation processes. Location: Denmark Price: On request Package Options: - Available as a complete line (5 × decanters + 5 × valve sections) - Or sold individually with corresponding valve section Storage location: Denmark, ready for loading. Export documentation and transport can be arranged.

Condition: used, Year of construction: 1996, System: Decanter / Centrifuge used Type: KHD CP3074 Hodpfx Asw Thi Eohnefi Year of manufacture: 1996 Machine No.: 5695 Speed: 2850 rpm Drum diameter: 670 mm Drum wall thickness: 17 mm Drum material: TSt E690V/St 52-3 Max. filling volume: 530 dm3 Max. operating pressure: 1 bar Weight: 11 t Separation technology: Sludge dewatering by decanter centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension based on their differing densities.

Condition: used, Name: Used Dewatering Centrifuge Manufacturer: KHD / Hiller Type: CP3034 / DP350422 VA HY Year built: 1997 / 2012 Material: V4A 14571 Max. bowl speed: 4.200 rpm Inner diameter drum: 348 mm Drum wall thickness: 10 mm Interior drum length: 1.700 mm Permissible sediment density: 1,30 kg/dm3 Max. operating temperature: 50 C° Dimensions: L 2.700 x W 1.400 x H 1.100 mm Empty weight: 2.880 Kg Hodpsw Ifmkofx Ahnjfi Technical doc.: Yes Message: The rotor was replaced by Hiller in 2012 in a V4A stainless steel version, type: DP 350-422 VA HY Accessories: A control cabinet and a hydraulic system Condition: Second hand Price: By request

Condition: used, System Decanter used Type Guinard D3LLC-30B HP Machine number 3806 Year of manufacture 2003 Speed 3500-4000 rpm. Drum diameter 340 mm Hfsdpfx Aswtcklehnsi Service If you have individual requests, please contact us. We are your specialist in sludge dewatering with over 40 years of experience.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0509, 🔧 Key Features Continuous Operation: Designed for uninterrupted processing, ensuring efficient separation of solids and liquids. High Separation Efficiency: Capable of achieving significant separation of solids, oil, and water, with capacities up to 30 m³/h, depending on the model. Hfedpfx Aewnx Ngohnsi Robust Construction: Built with durable materials, such as 304 stainless steel for product contact parts, ensuring longevity and resistance to corrosion. Advanced Control Systems: Equipped with PLC control panels featuring user-friendly interfaces for precise operation and monitoring.

Condition: used, System: Mobile dewatering system, decanter, and mobile centrifuge - used Application: Sludge dewatering Type: Alfa Laval DSNX 4250 Hfsdpfswmwrqex Ahnsi Year of manufacture: 1996 Operating hours: 29,200 Generator operating hours: 31,640 (see enclosed nameplate)

Condition: like new (used), Year of construction: 2020, System: 2-phase centrifuge, dewatering system in a double-deck container Manufacturer: Hiller Type: DP45N.422 VA HY Mach. No.: H6138 Year of manufacture: 2020 System: in a double-deck container, conveyor technology with side swivel conveyor, separate pump technology. System: demonstration system - as good as NEW! Maximum permissible speed: 3500 l/min Permissible Density: 1.3 kg/m3 Inner diameter of drum: approx. 450 mm Material: All parts in contact with the media made of duplex steel Drum material: 1.4470 Drum wall thickness: 11 mm Max. operating pressure: 100 mbar Drum drive: size 200L Power: 30 kW Speed: 3000 rpm Hfedpfx Aov D Rlyshnoi V/Hz: 400V, 50 Hz Hydraulic unit: PVRK07521L Power: 7.5 kW Control: FU Seepex pump: concentrate pump MD 006-12, see photos Macerator: Vogelsang, type RotaCut, RCQ-26G inline cyclone, BioCut and RCQ-33G inline cyclone see photos Spiral conveyor: Hiller see photos Polymer plant: GVU Technik Polymer Mix Station - technical data see photos Documentation: complete

Condition: used, Year of construction: 1993, System: Decanter Type: KHD CP 3-0.1 Year of manufacture: 1993 Machine no.: 5303 Speed: 3200 1/min Drum diameter: 530 mm Drum wall thickness: 12.5 mm Drum material: H2 Hjdpfx Ajv A Shgjhnsfi Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Condition: used, System: Decanter Type: KHD CP 3044 Year of manufacture: 1992 Machine number: 5787 Drum inner diameter: 448 mm Drum wall thickness: 11.0 mm Drum material: H2 ST52 Weight: 4000 kg Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities. Hsdev Acqfspfx Ahnjfi

Condition: used, System: Decanter, used Type: KHD SC 4-0.2 Year of manufacture: 1993 Hjdpfevz R Ehex Ahnefi Machine number: 5311 Max. drum speed: 2500 rpm Max. operating speed: 2500 rpm Drum inner diameter: 758 mm Drum wall thickness: 20 mm Drum material: 1.7218 Filling volume: 715 dm3 Total weight: 13,500 kg Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Condition: used, System: Decanter Type: CP 4-1.1 Year of manufacture: 1991 Machine number: 5045 Speed: 2200 1/min Drum wall thickness: 16 mm Hfjdsvz Rw Repfx Ahnji Drum material: 1.7382 Total weight: 9500 kg Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Condition: used, System: Decanter Hfjdpfx Ajvz Rwkohnoi Type: Alfa Laval DSNX 4250 Year of manufacture: 1995 Speed: 2950 rpm Gearbox: 2.71 Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Condition: used, System: Used decanter / centrifuge Manufacturer: KHD Hjdpfovz Ih Hsx Ahnofi Model: Solid bowl screw centrifuge Type: CP 3-0.1 Mach. No.: 5308 Maximum speed: 3200 l/min Drum inner diameter: approx. 530 mm Drum wall thickness: 12.5 mm Drum material: H 2 Gearbox: internal hydraulic gearbox Hydraulic drive: Rotodiff and pump unit (Viscotherm, Pump Unit C11-25Z/HP) Total weight: 3200 kg