Ecmo Industrie

Year of construction: 2002, condition: ready for operation (used), travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 15,000 rpm, tool weight: 10,000 g, number of axes: 4, This 4-axis FPT DINO CNC Gantry Milling Machine was manufactured in 2002. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine is equipped with an electrospindle capable of speeds up to 15,000 RPM and a robust gantry type cast-iron construction. If you are looking to get high-quality milling capabilities, consider the FPT DINO machine we have for sale. Contact us for further details. • Rapid feed rate: 35,000 mm/min Codszbic Aspfx Agfegu • Total installed power: 68.7 kW / 93.4 HP • Power supply: 400 V, 50 Hz, 116.1 A • Machine structure: Gantry type cast-iron construction • Spindle: Electrospindle, 5,000 / 10,000 / 15,000 rpm • Tool holders: HSK A63 DIN 69893; HSK E40 DIN 69893 • Max tool diameter: 70 mm • Max tool length: 300 mm

Year of construction: 1989, condition: ready for operation (used), Weight: 1.5t, operating hours unknown, with documentation, machine vices and fixtures are available as accessories, the machine ran in one shift operation and was serviced regularly. An inspection on site is possible. Cgjdpfezbb Spex Agfeu

Year of construction: 1999, condition: ready for operation (used), This 4-axis ANAYAK VH plus-2000 was manufactured in 1999. It features an X-axis travel of 2000 mm, Y-axis travel of 1500 mm, and Z-axis travel of 1460 mm. The machine is equipped with a powerful spindle offering a speed range of 24 - 3000 rpm and a maximum table load of 6 t. If you are looking to get high-quality milling capabilities, consider the ANAYAK VH plus-2000 bed type milling machine we have for sale. Contact us for further details. - Control Unit: Heidenhain TNC426CB- X-Axis Travel: 2000 mm (over rotary table)- Y-Axis Travel: 1500 mm (Milling capacity approx. 1200 mm)- Z-Axis Travel: 1460 mm (Vertical head milling capacity approx. 1295 mm / Horizontal approx. 1360 mm)- Spindle Power: 35 / 30 kW- Torque: 1337 / 1146 Nm- Spindle Speed Range: 24 - 3000 rpm- Feed Range (X-Y-Z): 10 - 3000 mm/min- Feed Range (B-Axis): 0.1 - 1.5 rpm (min⁻¹)- Rapid Traverse (X-Y-Z): 10000 mm/min- Rapid Traverse (B-Axis): 3 rpm (min⁻¹)- Tool Taper: SK50 DIN2080- Machine Weight: approx. 24 t- Rotary Table Clamping Surface: 1350 x 1550 mm- T-Slots: 9 x T28h7 / 150 mm distance- Max. Table Load: 6 t Cgedpfx Ajza E Hhogfou

Year of construction: 1998, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 975 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, overall weight: 24,000 kg, spindle speed (max.): 3,000 rpm, number of axes: 3, This 3-axis ANAYAK FBZ-HV-2500 was manufactured in 1998. It features a generous X-axis length of 2500 mm, Y-axis length of 900 mm, and Z-axis length of 975 mm. The machine is equipped with multiple heavy-duty Röhm vices and a hinged belt-type chip conveyor system for efficient chip management. If you are looking to get high-quality milling capabilities, consider the ANAYAK FBZ-HV-2500 bed type milling machine we have for sale. Contact us for further details. Csdpfxeza E D Ho Agfsgu - Dimensions Clamping Surface: 800 x 800 mm + 1615 x 800 mm- Power Consumption: 60 A- Technical Availability: 97.1%- Planned Performance Hours/Year: 1801 Std.- Performance Index 2012: 169%- Net weight: 24t- Workholding/Clamping Equipment: Equipped with multiple heavy-duty Röhm machine vices on the T-slot table- Swivel / Indexing Mechanism: Features rotary/swivelling foundations beneath the vices- Chip Management: Hinged belt-type chip conveyor system discharging into a mobile steel skip/bin- Coolant System: External enclosure panels with viewing window and localized splash guarding

Condition: ready for operation (used), Year of construction: 1990, Available immediately from university surplus: Vertical milling machine LAGUN Type FVA 3 LA Year of manufacture 1990 Table 1600 x 400 mm Travel X/Y/Z 1600/360/420 mm Spindle taper SK 50 Automatic quill feed 127 mm Spindle speeds 28 – 1400 rpm Cgodpfx Agezay Itsfou Drive power 12.5 hp Weight 4.5 tons Numerous accessories included: collets, milling cutters, hydraulic vise Price: Euro 1,500.00 plus VAT, ex works

Condition: ready for operation (used), Rotational speed: 0-3150/min, power supply: 20A, connected load: 9kW, control: Heidenhain TNC 155, length: 2700mm, width: 2900mm, height: 2000mm, weight: 2.3t. An on-site inspection is possible. Cedpfezavyxox Agfjgu

Condition: ready for operation (used), X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible. Cgsdpfozavyrox Agfeu

Condition: ready for operation (used), Year of construction: 1986, Immediately available ex location: Fully automatic milling machine Busch Type NF 8/32 Year of manufacture: 1986 Codpjzap Upsfx Agfogu Groove width up to 32 mm Machining length up to 6100 mm Automatic material feed Automatic infeed Drive: 5.5 kW Accessories: support tables Tool holders, cutters Coolant system Digital display Weight: 4 t Price: EUR 3,000 – plus VAT ex location

Year of construction: 1987, condition: ready for operation (used), Number of T-slots: 8, rated current: 23A, controls: CONTOUR 3, with tool magazine. An on-site inspection is possible. Csdpfxezadk Se Agfogu

Condition: ready for operation (used), X-axis: 1080mm, y-axis: 710mm, z-axis: 710mm, speed range: 1-12,000/min, max. table load: 550kg, NC rotary table diameter integrated into the fixed table: 800mm, table dimensions: 1500x800mm, number of tool positions: 32, tool holder: SK 40 DIN 69872, connected load: 15kW, control system: Heidenhain TNC 430, operating hours: 63,619h, spindle hours: 22,552h, with controlled NC swivelling milling head B-axis, active cooling for the B-axis motor spindle, handwheel, operating mode 4, the hard drive drive amplifier was replaced in January 2025. An on-site inspection is possible. Cedpozadkrefx Agfsgu

Year of construction: 2006, condition: ready for operation (used), Number of axes: 3, table dimensions: 1210x267mm, max. spindle speed: 4000rpm, weight: approx. 2t. An on-site inspection is possible. Cgedpoy Uyf Asfx Agfou

Year of construction: 2015, condition: used, machine/vehicle number: VT2515015, 86.9 kW, disassembled, including peripherals; no guarantee of completeness! Cgodpfx Agoy T Nv Iefeu

Condition: ready for operation (used), A tool milling machine is offered. Travel range X/Y: approx. 400mm/200mm, spindle speed: 224-2240rpm (6 steps), feeds: 0.10-0.71mm/rev, tool holder: MT/SK, control: manual. Equipped with vertical milling head, adjustable compound table, mechanical handwheels. Inspection possible by arrangement. Cjdpfoy Tx R Uox Agfegu

Year of construction: 1969, condition: ready for operation (used), Offered is a universal tool milling machine. Working area X/Y/Z: approx. 330mm/145mm/370mm, table clamping surface: 630mm × 180mm, spindle speeds: 63-3150rpm (across 8 steps), spindle mount: SK 30, connected load: 380V/16A, control: manual. Equipped with swiveling vertical head, manual axis feed via handwheels, T-slot table, integrated chip support tray. Overall dimensions X/Y/Z: approx. 1100mm/1200mm/1650mm. Inspection possible by arrangement. Cgsdpfxey Tx Ruo Agfju

Year of construction: 1977, condition: ready for operation (used), Offered is a universal knee-type milling machine. Working area X/Y/Z: approx. 710mm/250mm/430mm, table clamping surface: 1250mm/315mm, spindle mount: ISO 40, speed range: 45-2000rpm (18 steps), feed rate: 10-1000mm/min, rapid traverse: available, control: conventional with electrical program control (PFAFF panel). Equipped with horizontal milling spindle, manual support bracket for long milling arbors, hydraulic pressure accumulator system, coolant device, chip collection tray, central lubrication. Weight: approx. 2100kg, overall dimensions X/Y/Z: approx. 1950mm/1750mm/1850mm. Inspection possible by arrangement. Cgodpfx Aoy Tx Rhsgfju

Year of construction: 2013, condition: used, overall weight: 15,500 kg, total length: 4,000 mm, total width: 2,250 mm, total height: 2,810 mm, spindle motor power: 29,000 W, ALZMETALL GS 1000/5-T CNC 5-axis machining center stable gantry design equipped with NC rotary tilting table and torque motors for backlash-free and highly dynamic direct drives in A and C axis simultaneous 5-axis machining possible equipped with 3D interpolation look-ahead TCPM and free contour programming water-cooled high-frequency motor spindle with thermal compensation (Therm-Ex) and air blow through spindle high-pressure coolant system extensive coolant equipment with band filter high-pressure pump and chip conveyor oil mist extraction system (LTA) integrated measuring systems with 3D probe (M&H) and laser tool measurement (Blum) collision monitoring (DCM) pick-up tool changer system automatic central lubrication LED working area lighting full enclosure Weight approx.: 15,500 kg Travel Z-axis: 600 - mm 5-axis machining: Yes Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 4000 x 2250 x 2810 mm Spindle performance: 29 kW Movement A-axis: 0 - 140 ° Spindle speed: 12000 - rpm NC rotary table: Yes Travel Y-axis: 800 - mm Number of tool locations: 33 Control: Heidenhain iTNC 530 Movement C-axis: 360 - ° Dimensions of the clamping surface: 800 x 630 mm Year of construction: 2,013 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation Codpfjy Th U Nsx Agfjgu under power: Yes

Year of construction: 1992, condition: ready for operation (used), A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement. Cgjdpey Taubofx Agfeu

Year of construction: 2001, condition: ready for operation (used), A CNC crankshaft milling machine Heller without chuck is available. Milling speed: 300m/min, workpiece length: 800mm, max. workpiece diameter: 700mm, pin diameter range: 35mm-80mm, clamping diameter: 180mm, travel path W/U/X/Z: 625mm/180mm/180mm/660mm, rotation range X: 360°, control system: Siemens Sinumerik 840D. Documentation available. An on-site inspection is possible. Cgodpfx Agsy S A Nlefeu

Year of construction: 1981, condition: used, machine/vehicle number: 1157, Very high-quality and precise polishing milling machine. Spindle speed: 750 ~ 3000 rpm Spindle length: 430 mm Spindle weight: 155 kg Voltage: 400V-3F Cgedjy Sid Aepfx Agfsu Motor: 4 kW Compressed air: 6 bar, approx. 12 m3/h Work table: 600 x 450 mm Rapid traverse of work table: 5000 mm/min Feed of work table: 0 ~ 5000 mm/min, continuously adjustable Travel of work table: 700 mm Weight of work table: 100 kg Machine weight: 3800 kg Control cabinet weight: 800 kg Machine dimensions: L x W x H 2320 x 1200 x 1920 mm Control cabinet dimensions: L x W x H 2000 x 500 x 2100 mm Includes manual and parameters.

Year of construction: 2022, operating hours: 200 h, condition: like new (used), functionality: fully functional, We are offering our attached milling machine for sale at a favorable price. It has approximately 200 operating hours and is not in use at all. There is no automatic feed. It can be inspected at 5400 Mezőtúr, at MUMGÉP Kft. Cgsdpfx Aoy R Rbgegfju Price: negotiable.

Year of construction: 1998, condition: ready for operation (used), A CNC universal bed milling machine Anayak is available. Travel X/Y/Z: 2500mm/900mm/975mm, table dimensions X/Y: 2900mm/800mm, spindle taper: ISO50, spindle speed: 3000rpm, power: 22kW, feed: 6m/min, rapid traverse: 10m/min, tool positions: 30. Machine dimensions X/Y/Z: approx. 6000mm/3000mm/3000mm, weight: approx. 20000kg, control: Heidenhain TNC 426. Documentation available. An on-site inspection is possible. Expected to be available around September 2026. Csdpey N Dc Uefx Agfjgu

Year of construction: 1999, condition: ready for operation (used), A CNC universal bed milling machine Anayak is available. Travel path X/Y/Z: 2000mm/1300mm/1460mm, table dimensions X/Y: 1350mm/1550mm, max. table load: 6000kg, speed: 3000rpm, spindle taper: ISO50, feed rate: 3m/min, rapid traverse: 10m/min, weight: approx. 24000kg, control system: Heidenhain TNC426CB. Documentation available. An on-site inspection is possible. Cedpfx Agjy N Ddfefsgu

Year of construction: 2008, operating hours: 12,897 h, condition: ready for operation (used), travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,600 mm, overall weight: 34,000 kg, total width: 11,000 mm, total height: 6,450 mm, product length (max.): 12,500 mm, spindle speed (max.): 2,500 rpm, tool weight: 25,000 g, number of axes: 5, This 5-axis SHW UFZ 6L Bed Type Milling Machine was manufactured in 2008. It features an impressive X-axis travel of 6000 mm, Y-axis travel of 2100 mm, and Z-axis travel of 1600 mm. The machine includes an automatic tool changer with a capacity for 150 tools and a robust clamping plate surface of 3600 x 3750 mm. If you are looking to get high-quality milling capabilities, consider the SHW UFZ 6L machine we have for sale. Contact us for further details. Spindle operating time: 12,897 hoursHydraulic operating time: 43,912 hours • W-axis travel: 1500 mm Cedpfoy Nzdcex Agfsgu • Digital feed drives • X-axis: 2–20000 mm/min • Y-axis: 2–24000 mm/min • Z-axis: 2–24000 mm/min • Rapid traverse • X-axis: 20000 mm/min • Y-axis: 24000 mm/min • Z-axis: 24000 mm/min • Spindle • Head: Automatic universal milling head • Main spindle motor: Siemens 1PH7 167 • Gearbox: ZF 2K300 / SEW FF37 / FA47 B / KA Z37 • Repeatability: ±0.002 mm • Spindle Speed (60 min Max): 3200 rpm • Spindle Speed (15 min Max): 4000 rpm • Tool changer • Type: Automatic • Capacity: 150 tools • Max tool length: 400 mm • Max tool weight: 25 kg • Tool taper: SK50 DIN 69871 • Station: Pickup-station • Table/plates • Clamping plate surface: 3600 x 3750 mm • Electronics and control • Control panel: Integrated CNC in work platform • Servo motors: Siemens 1FT6 series • Drives/regulators: Indramat ECOdrive 3 • Measuring systems: Heidenhain LS 186C / LB 382C / ROD 480 / ROQ 425 • Electronic pressure switch: ifm PN 5, PN 7 • Power supply • Voltage: 400 V, 3-phase, 50 Hz • Power connection: approx. 80 kVA • Main fuse: 160 A (slow-blow) • Conductor cross-section: 70 mm² • Pneumatics and hydraulics • Pressure: 4–6 bar • Connection: G1/4 • Air consumption: approx. 320–400 l • Valve terminal: Festo CP10+ • Hydraulic system: Bosch with 1 x 50 l accumulator Additional equipment • CNC rotary table unit: Demmeler DRTN • Table surface: 2000 x 1800 mm • Max rotation speed: 4 min^-1 • Collision monitoring: Brankamp Typ CMS (1-channel) • Safety brake: Mayr Typ 891... • Cooling unit: Schimpke DK 38 V / BKW SK 250D • Coolant filter: Knoll KF110/1100 • Oil filter: ARGO D 062-156 • Chip conveyor: Richter SP 250/63 (x2) • Measurement system: m&h 20.10 Set Multi SK50 / m&h 35.10 TS plug • Lubrication: Automatic • Machine enclosure: 3-sided Technical Specification Taper Size SK 40

Year of construction: 1987, condition: ready for operation (used), Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Cjdoy I Adhjpfx Agfogu

Year of construction: 2013, condition: ready for operation (used), A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible. Csdpfx Agey H I Hxjfjgu