VITREX s.r.o.

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, total height: 2,500 mm, total width: 3,000 mm, total length: 10,000 mm, TECHNICAL DATA * Standard dimensions of vacuum bags: 2650 x 5,150 mm * Dimensions for flat glass lamination (using silicone bags): 2,500 x 5,000 mm * Lamination frames: two Dedpfx Asz Ihikoa Isku * Maximum load per lamination frame: 1,200 kg distributed over the entire surface. * Vacuum pumps: two (one for each frame) * Heating zones: 9 zones, each monitored by a thermocouple. * Temperature measurement of heating chambers: 9 + 1 thermocouples connected to the PLC system. * Vacuum control and monitoring: Digital pressure sensors connected to the PLC system on the operator panel. * Overheat protection: one independent thermocouple inside the chamber, with the ability to cut off the power circuit in case of furnace overheating. * Electrical panel, control panel, and wiring: manufactured according to "EC" guidelines. * Safety features: according to "EU" guidelines. * Installed power / power supply: 54 kW per chamber. 400V 50 / 60Hz, three-phase + N + T * Average consumption: < 20 kW per hour. * Control / monitoring system with TEMA 2020 SOFTWARE: -PLC system and intuitive operator graphic interface with touchscreen. -Multilingual -Up to 6 (six) settings, with no time limitations. -Real-time graphs: average temperature of the furnace and modules, each heating zone, vacuum (with the possibility of disconnecting the pump at any time). -Power consumption. -Historical archive of data from the last 500 hours of production, displayed in a graphic and text file. -Log of all operations and alarms. -Program < EASY MAINTENANCE > for vacuum pumps. -Delayed start of the process (for night use) -kW meter. -Remote control from various devices (smartphone, tablet, computer, etc.) -Report of the entire lamination process downloadable via USB. -Remote assistance LIFT – lifting platform * Lifting platform with servomotor assistance to align the lamination frames with the laminating frame. Essentially consists of a single hydraulically controlled lifting platform, equipped with appropriate tracks for moving the lamination frame.

Condition: good (used), Frame transport carts are height-adjustable: 2150 to 2850 mm. Applications: Insulated glass spacers, frames, etc. Frames are secured using clamps or slotted holes. Dimensions: Dsdjz Hzhkopfx Aa Ieku Height: 2150 to 2850 mm Width: 680 mm Depth: 450 mm Weight: approx. 12 kg Condition: good, second-hand

Year of construction: 2004, condition: good (used), Load capacity: 3000 kg Dimensions: Height: 3300 mm Width: 2900 mm Depth: 230 mm Weight: 300 kg Dkedpfx Aaez Hzcuj Ieu Condition: good, second-hand

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns Dkedpfoz Dt T Tjx Aa Isu working height : 2000 mm OPEN TOP including air compressor and dryer . voltage : 230/400 V 50 Hz

Condition: ready for operation (used), functionality: fully functional, Glass rack, type A: loading capacity 2500 kg, own weight 220 kg. For glass dimensions: 2460x1050x2200 mm (external height, including hook for crane loading: H2600). Approximately 60 units available. Dodpez Abbfofx Aa Ieku

Year of construction: 1997, condition: used, Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible. Dedpfxszybwbj Aa Isku

Year of construction: 2011, condition: like new (used), functionality: fully functional, FGL Glass Storage System + Lightweight Platform Model: FGL-V-5000-CKE-190/BL4 Year: 2011 Load Capacity – per compartment: max. 2,200 kg per compartment Frame: 600 kg/m² Total weight: 6,850 kg / 145 kg per compartment Positions: 8 x 5 = 40 positions Model: Lightweight platform for FGL-V-5000-CKE-190/BL4 Year: 2011 Load capacity of lightweight platform: 600 kg/m² Dkedpfxozxc Hbs Aa Iju Total load capacity of lightweight platform: 25 tons Weight of lightweight platform: 1182 kg Dimensions: L = 9660 mm / W = 4220 mm / H = 2980 mm

Condition: excellent (used), Year of construction: 2013, UV digital printer. Max. glass size: 2100 x 3100 mm. Prints on rigid materials such as glass, plexiglass, PVC, wood, etc. System with 6 print heads. Dedpfx Aaszvpzgs Ioku Condition: very good, second-hand

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DESCRIPTION: The KCK-1000-FCP-UC30 pressure chamber is a versatile device with a wide range of applications. It enables the following types of work: - Cleaning the surfaces of metal objects, - Removing: welding residues, scale, rust, oxides, surface deposits, and old paint coatings, - Deburring the edges of objects, - Achieving the desired surface roughness. Technical data: - Width: 1470 mm - Depth: 1600 mm - Height: 2140 mm - Working chamber: 950 × 880 × 880 mm Dkedpfozvdfaex Aa Iju - Abrasive circulation: pressure-fed - Hand openings: 2 - Nozzle: boron carbide, ø 6 mm - Weight: approx. 300 kg - Lighting: fluorescent - Abrasive tank: 30 l - Air consumption: according to the manufacturer's table

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm included options: Dedpfjzu R Ulox Aa Isku - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dkedpfozu Nvzex Aa Iou Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, power: 2 kW (2.72 HP), input frequency: 60 Hz, input voltage: 575 V, overall weight: 750 kg, Brand new twin-shaft batch mixer from BHS-Sonthofen for the intensive and homogeneous mixing of various bulk materials. Technical data: Type: DKXC 180 Year of manufacture: 2020 Nominal capacity: 180 liters / 0.18 m³ Dkodezumpxjpfx Aa Iju Drive: 2 × 5.5 kW Voltage: 575 V / 60 Hz Weight: approx. 750 kg pneumatically operated discharge flap Location: Canada The electrical control system was manufactured according to Canadian regulations and must be inspected for operation in Europe and, if necessary, modified to comply with European regulations. The mixer has never been used. Technical specifications are subject to change without notice and are offered for sale subject to prior sale.

Condition: excellent (used), functionality: fully functional, Harp racks for glass transportation Dedpfx Aszty Rmoa Isku 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg More technical information can be found attached as Tech. data file 4 units in stock In very good and clean condition As is Available immediately

Condition: good (used), Year of construction: 2007, Single-stage reverse osmosis system. Model: R0 04-1 with EWMK40 2xRVMR1ACM Dksdpfszqtp Rox Aa Ieu Width: 880 mm Height: 1450 mm Depth: 380 mm Control cabinet dimensions: Width: 500 mm Depth: 250 mm Height: 500 mm Total weight: 120 kg Condition: good, second-hand

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: 202101410, For sale: a brand-new, unused Junya horizontal car wash – Chinese-made, purchased in 2022. It was bought to set up a second lamination line, but this plan was not implemented. The machine is assembled and ready for use in the workshop; all that is needed is to fill it with water. Dsdszqtbyjpfx Aa Ieku The machines are of very good quality and operate reliably across three shifts. Price: PLN 95,000 net. Terms negotiable.

Condition: good (used), Height: 1600 mm Width: 1200 mm Depth: 1100 mm Dsdpszqf Edjfx Aa Isku Weight: approx. 250 kg Condition: good, second-hand

Condition: good (used), Year of construction: 1990, Unit with side support table External dimensions of drilling machine: Height: 1700 mm Width: 700 mm Depth: 1500 mm Weight: approx. 320 kg External dimensions of the side table: Height: 1100 mm Width: 2600 mm Depth: 1410 mm Dsdpfxjzqfv No Aa Ioku Condition: good, second-hand

Condition: good (used), Year of construction: 2001, Pumping capacity/flow rate: 16/19 m³/h Pump originally from a Lisec A2RL (molecular filling system) Width: 570 mm Depth: 250 mm Height: 510 mm Condition: good, second-hand Dodpfxozqd Evj Aa Isku

Condition: good (used), Oil-water separation system for compressor condensate. Height: 1000 mm Width: 500 mm Dkodpfx Aaozqc Uvo Ieu Depth: 500 mm Weight: approx. 20 kg Condition: good, second-hand

Condition: good (used), Max. External Dimensions: Diameter: 580 mm Height: 1160 mm Weight: approx. 50 kg Condition: good, second-hand Dksdpezqc E Ujfx Aa Ieu

Year of construction: 1992, condition: good (used), Lifting capacity: 800 kg Dkedpfx Aajzqczve Iou 7 suction plates Electrical connection: 220/240 V (vacuum pump) Width: 3000 mm Height: 900 mm Depth: 250 mm Weight: 80 kg Condition: good, second-hand

Condition: good (used), Year of construction: 1999, The system is electrically adjustable and has a total of 24 compartments. 2 compartments with a 210 mm shelf height and 22 compartments with a 150 mm shelf height. Dodpfx Aaszn U Ato Isku External dimensions: Height: 3520 mm Width: 8630 mm Depth: 3520 mm Condition: good, second-hand

Condition: excellent (used), functionality: fully functional, Glass transport rack A type Loading height: 1800 mm Loading width (glass thickness): 400 mm each side Dkodpfsznufuex Aa Ieu Total rack dimensions: 1150 x 1150 mm Approx. 65 pcs. available Very good and clean condition As is Available immediately

Condition: ready for operation (used), A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Dodpfx Aaoznmxgo Ioku

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Harp racks for glass transportation Dkodsznlrfjpfx Aa Isu 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg 5 pcs. in stock New, never used ! Available immediately