Euromachinery s.r.o.

Condition: ready for operation (used), Year of construction: 1979, functionality: limited functionality, spindle bore: 90 mm, overall weight: 8,500 kg, turning diameter: 800 mm, total length: 3,500 mm, Universal lathe, in working condition, although some feed mechanisms are not functioning; sold with the accessories shown in the photo (centers, faceplate, chucks). It has an 800mm swing over the bed, but the front section of the bed is removable to allow for a 1000mm swing; it can accommodate a shaft up to 3500mm in length. The headstock can accept a spindle with a 90mm diameter. Bjdpfx Ajy Idbnokasdb

Condition: excellent (used), Year of construction: 1967, Swing over bed: 800mm Bdodpfx Aey Iai Uokaob Swing over support: 450mm Turning length: 2800mm Workpiece weight: 5000kg

Condition: refurbished (used), Lathe for iron and metalworking Nosotti brand T200/1500 model accessories how to take photo Bsdpsy D Sunsfx Akasdb

Condition: used, Mechanic's Lathe SCHAUBLIN Type 102 Mach. No. 1998 Centre distance: 350 mm Bdjdpey Dvf Refx Akaob Bed length overall from headstock: 635 mm Swing over bed: 200 mm Centre height over bed: 102 mm Swing over cross slide: 120 mm Centre height over cross slide: 61 mm Spindle bore: 18/20 mm Spindle speed, gear stage 1: approx. 120 / 190 / 320 rpm Spindle speed, gear stage 2: approx. 590 / 970 / 1500 rpm Chuck mounting: external thread M38 x 3 mm Tailstock taper: MT 1 Drive motor: 0.55 kW, 920 rpm Power supply: 380 Volt, 50 Hz - Spindle speeds adjustable via 2 gearbox stages and 3-step drive belt shifting - Main spindle with forward and reverse operation - Spindle mount with M38 x 3 mm thread - 3-jaw scroll chuck Ø 128 mm with stepped jaws - Collet clamping system with 6 round collets Ø 3 / 4 / 5 / 6 / 8 / 20 mm - Integrated dividing plate on main spindle with 48 / 60 / 100 holes - Toolholder slot approx. 10 x 18 mm with clamping screw - Sturdy wooden base with 42 mm laminated board Required space (with stand): L x W x H: 1160 x 750 x 1300 mm Weight with stand: 150 kg Good condition

Condition: used, functionality: fully functional, Technical data: Distance between centers approx.: 500 mm Center height over bed: 125 mm 16 spindle speeds Range 1: from 110 – 900 rpm Range 2: from 440 – 3600 rpm Bdedpfx Aoyzggaskaob Space requirement, length x width: 1.2 x 0.6 m Estimated weight approx.: 400 kg

Condition: excellent (used), Technical details Swing diameter over cross slide: 940 mm Turning diameter: 1,260 mm Speed (min.): 8 rpm Speed (max.): 900 rpm Overall height: 1,800 mm Overall length: 3,500 mm Bdjdpfx Aksyr Sx Ioaob Overall width: 2,440 mm Three-jaw chuck diameter: 500 mm Centre distance: 3,500 mm Offer details VDF Wohlenberg V1180 Centre distance: 3,500 mm 3.5 - 710 rpm 71 - 900 rpm Chuck: 500 mm diameter

Condition: used, functionality: fully functional, EMCO Compact 8 Lathe, used 230 V 650 W motor Center distance: 450 mm Center height: 105 mm Spindle bore: 20 mm Spindle speed: 100 - 1700 rpm Movable tailstock MK2 Automatic longitudinal feed Bedpsymnkvsfx Akajdb Thread cutting Tool post with multiple attachments Emco 3-jaw chuck 110 mm TOS 4-jaw chuck 125 mm 200 mm chuck Rotating center Röhm keyless drill chuck 3-16 mm Technical specifications Approximate onsite dimensions (L 950 x 520 x 340 mm x W x H) Weight approx.: 75 kg

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm spindle size: 50 mm chuck size 200mm speed range 40 rpm to 2000 rpm machine weight: 1700kg including 3 jaw chuck and tool holder Bodpfx Ajyh Ndwskaodb

Condition: excellent (used), Year of construction: 1998, total length: 7,500 mm, We offer this Cazeneuve HB725 mechanical lathe in very good condition, year of manufacture 1998. Manufacturer: Cazeneuve Model: HB725 Year of manufacture: 1998 Machine type: Mechanical lathe Bdedpfx Asyag Nqekasb Country of origin: France If you have any questions or need additional information, please send us a message or give us a call.

Condition: good (used), turning diameter over top slide: 940 mm, turning diameter: 1,260 mm, rotational speed (min.): 8 rpm, rotational speed (max.): 900 rpm, total height: 1,800 mm, total length: 12,200 mm, total width: 1,540 mm, three-jaw chuck diameter: 500 mm, distance between centers: 8,000 mm, VDF Wohlenberg V1180 Distance between centres: 8000 mm 3.5 - 710 rpm 71 - 900 rpm Bedox Thqdjpfx Akasdb Chuck: 500 mm diameter

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe Bsdpfx Akox Hp Iweasdb 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Condition: excellent (used), WEILER PRIMUS Type MD-G - Centre height: 125 mm - Centre distance: 400 mm Bdsdpfx Aoxw H Dbekasb - Speed range: 40-3000 rpm - Spindle bore: 24 mm - Electric chuck guard - Multifix with tool holders - Tailstock with drill quill - Four-jaw chuck - Work lamp - Bed stop - Documentation Dimensions: LxWxH 1.3x0.8x1.6 meters / Weight: 450 kg Errors and omissions excepted.

Condition: reconditioned (used), Year of construction: 1977, Engine Lathe Brand: WEILER Model: MDU 260 Year of manufacture: 1977 – workshop tested Machine no.: 14942 Centre height: 125 mm Spindle bore: 28 mm Accessories: - Electrically operated chuck guard - 3-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - 4-jaw chuck Ø 140 mm incl. set of turning jaws incl. set of boring jaws - Safety chuck key - Manual clamping device - Collet set W28 (366E) - Set (25 pcs.) collets W28 (366E) from 1.0-25.0 mm in 1.0 mm steps - Fixed centre for headstock W28 (366E) - Quick-change toolholder Body size A Bedpoxv A I Tofx Akaedb - Operating manual Used as seen, without warranty The machine is technically in accordance with the state of the art of its year of manufacture.

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, some exhibitions and demonstrations Bsdpfswrr Evex Akajdb

Condition: used, messurements (LxWxH): 1785 x 600 x 1200swing diameter: ca. 260centre height: 130weight approx.: 770turning length: 600Technical Data:Center distance: approx. 600 mm Center height: approx. 130 mm Swing over bed: approx. 260 mm Spindle bore: approx. 28 mm Spindle speeds (infinitely variable): approx. 52 – 2,250 RPM Drive power: approx. 1.62 kW Dimensions: approx. 1,785 mm (length) x 600 mm (width) x 1,200 mm (height) Weight: approx. 770 kg Features:Three-jaw chuck with a diameter of 140 mm Bjdev Ncn Djpfx Akasdb Four-tool steel holder Tailstock Drill chuck

Condition: like new (used), Year of construction: 2023, GM – DC330MINI V4 Label Converter Year of Manufacture: 12/2022 _____ Machine Specifications and Equipment:  Max Webwidth: 330mm  Speed up to 65 m/min, semi rotary; 72 m/min full rotary  Unwinding max. 700 mm  Rewinding max. 450mm  Touch screen  Flexo Unit Corona  Webedge Control  Semi-rotary die cutting  Automatic register check  GEW – UV  Lamination Bsdpfx Aksv Aa Twsaedb  GM SmartCrush _____

Condition: as good as new (ex-display), The TDM S 430/1000 is a highly versatile Conventional Horizontal Lathe from KNUTH, designed to meet the demands of both single part and small batch productions in tool making and device construction. With an inverter that allows spindle speeds of up to 2,000 rpm and a user-friendly control panel, this lathe is ideal for training applications. Its robust construction features a one-piece heavy-duty cast-iron bed, ensuring increased rigidity and stability during operation. A modern 3-axis position indicator, adjustable longitudinal stops for automated feed shut-off, and a powerful coolant system further enhance its functionality. The TDM S 430 also includes an easy-to-read digital display for spindle speed, ergonomic selector levers for effortless control, and comprehensive standard equipment such as a 4-station tool holder and a robust LED work lamp. Experience precision and efficiency in your machining tasks with the TDM S 430/1000. Request a quote today to explore how this exemplary Conventional Horizontal Lathe can elevate your production capabilities. Bodpfx Ajuyg Dnjkaedb

Condition: good (used), Used Pinacho L1-260 lathe Bodpfx Akeudw Iisajdb Distance between points: 1625 mm Max. turning on bed: 520 mm Length of neckline: 350 mm Tilting on longitudinal carriage: 470 mm Turning on the transversal carriage: 320 mm Swing in dive: 770 mm Reed pitch: 68 mm Main engine power: 7.5 hp *It will be delivered with 3-jaw chuck. *Price can be requested with or without CE regulations.

Condition: used, Iron lathe Bdsdpfxsrdmm Ds Akaob

Condition: used, Landonio TMU 1200 Lathe Bodpfx Aeizxvkjkajdb

Condition: good (used), Year of construction: 1979, Center height: 120 mm Center width: 450 mm spindle opening/boring: 23 mm board width: 100 mm Speeds: (12) 180 - 2240 min-1 travel top slide: 140 mm tailstock mount: MK 2 quill stroke: 80 mm motor power: 2,5 kW Bjdpeip Nczefx Akaedb connection: 400 V dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Punching device quick change holder system Multifix, size Aa Machine light Coolant device