Budget Machines

Condition: used, Year of construction: 1981, 2" mm dimensions of the machine ca. 1,3 x 0,8 x 1,3 mm weight of the machine ca. 250 kg Equipment/Accessories: - Foot switch Duodoy Aa Imopfx Acwjr - Mobile stand Includes a wide range of bending tools See images

Condition: good (used), Year of construction: 2007, machine/vehicle number: 5007078, Offer 26085 Technical Data: - Bending capacity: Tubes at 45 kg/mm² up to Ø 60 x 4 mm - Solid material up to 45 mm - Bending angle: 0 - 180° - Maximum central bending radius, Rm: 171 mm - Minimum inside bending radius, Ri: 10 mm - Drive: 400 V / 4 kW - Space requirement: approx. W 400 x H 950 x D 600 mm - Weight: approx. 100 kg - with pre-selection for bending angle - Digital bending angle display + fine adjustment - 8 bending tools included: - ½" R 46 mm - 25 R 56 mm Dodpfx Aceyz R Tkjwsur - 30 R 67 mm - ¾" R 56 mm - 1" R 67 mm - 1 ¼" R 100 mm - 1½" R 130 mm - 2" R 150 mm

Condition: used, functionality: limited functionality, Year of construction: 2002, control type: CNC control, degree of automation: automatic, controller model: VGP3D, pipe diameter (max.): 42 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 2 mm, bending radius (max.): 120 mm, mandrel length: 6,000 mm, number of axes: 5, overall weight: 7,000 kg, Equipment: centralized greasing system, documentation/manual, emergency stop, We offer this used CNC tube bending machine BLM DYNAM4, right/left, year of manufacture 2002. Manufacturer: BLM Model: DYNAM4 Serial number: 482020102005 Year of manufacture: 2002 Weight: 7000 kg Technical specifications: - CNC control: VGP3D – advanced 3D graphical programming software dedicated to tube and rod bending. - Number of controlled axes: 5. - Maximum tube diameter: 42 mm. - Maximum wall thickness: 2.5 mm. - Maximum bending radius: Rm 120 mm. - Bending length: Factory-extended machine, allowing for tube bending up to 6 meters with mandrel – a rarely offered option. - Bending direction: Capability to bend both left and right, enabling the production of highly complex parts. - Additional features: Simultaneous bending and roll bending of arcs. - Machine weight: 7 tons (dry weight). - Light barriers - Metal fencing - Tooling package (on pallet) Service work performed: - The machine has been thoroughly cleaned. - Oil has been flushed and replaced. Dusdpfx Aoyzy U Dscwor - Approximately 90% of hydraulic hoses were replaced. - Valve plates have been resealed. - Main motor has been rewound. If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2,400 sheets/hour Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Dodoyzyh Djpfx Acwour Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotational speed Z-axis: 900 °/s Rotational speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Max. range at max. acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Control system: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg EQUIPMENT BLM bar loader BLM CARM 7 Note: The machine is sold without conveyor belt and safety fence.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 611080402022, Equipment: bar feeder, TECHNICAL DETAILS Dsdpfx Asyzya Tscwsur Axis Speeds Positioning speed X-axis: 2,000 mm/s Bending speed Y-axis: 400 °/s Rotational speed Z-axis: 900 °/s Rotational speed R-axis: 110 °/s Positioning speed T-axis: 400 mm/s Tolerance Tolerance X-axis: ±0.05 mm Tolerance T-axis: ±0.05 mm Tolerance Y-axis: ±0.05° Tolerance Z-axis: ±0.05° Tolerance R-axis: ±0.05° Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminium/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average output: 1,700–2,000 bends/hour MACHINE DETAILS Hydraulics System Tank capacity: 80 l Pump delivery rate: 13 l/min Pressure MR200E: max. 140 bar Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Relative humidity: 5 to 75 %, 24 h Electrical Data Supply voltage: 400 V ±5 % Power type: Three-phase without neutral Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Machine weight: 1,850 kg EQUIPMENT BLM bar feeder BLM CARM 7 Bar feeder weight: 650 kg Conveyor belt Note: The machine is sold without safety guards.

Condition: used, Year of construction: 1993, R 36 - R 150 bending speed 4,5 U/min 3 6 - 33,7 mm dimensions of the machine ca. 600 x 260 x 900 mm weight of the machine ca. 110 kg Equipment/Accessories: Dodsyx Ip Dspfx Acwour - Foot switch - Base frame Includes the following tools: 1 pc. 25mm, R80 1 pc. 18mm, R45

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration Dedpeyx A Uusfx Acwjur -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: used, functionality: unexamined, Tube drawing machine with 2 stations. The machine has not been used for a while and is kept in storage. Duodpfsyxpr Hex Acwjr

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400 V weight 395 kg Overall size 900x600x1100 mm Equipment / Accessories: Djdpfx Aceyv N A Towsur - Two driven rollers - Manual delivery of the upper roller - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used

Condition: new, 95 mm Shaft diameter 30 mm Shaft revolutions 7 U/min roll diameter 132 mm Drive 0,75 kW weight 220 kg range L-W-H 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller Djdoyv N A Hspfx Acwjur - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc.

Condition: new, I-beam section - flat steel 80x20 (d1200) mm I-beam section - upend 80x25 (d2100) mm L-beam 50x50x6 (d1000) mm bar material - diameter 40 (d800) mm square material 60x60x3 (d4000) mm rectangle 80x30x3 (d6000) mm tube diameter max. 70x2 (d1600) mm tool adaptor 60 mm roll diameter 177 mm bending speed 6,4 m/min total power requirement 4 kW machine weight ab. 970 kg Overall size 1400x950x1450 mm Domestic equipments: - hydr. roller drive - Planetary gearbox delivery of the 2 lower rollers Duodsyv Nwqspfx Acwjr - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers - mobile control panel - 3 driven rollers - Digital display - Machine horizontal u. vertically usable - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm tube diameter max. 100 x 3 (d 3000) mm L-beam 80 x 80 x 8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm bar material - diameter 60,0 (d 1000) mm I-beam section - flat steel 120 x 30 (d 600) max. 140 mm tool taper 80,0 turning speeds 4,2 U/min weight 1600 kg dimensions 1240 x 1375 x 1540 mm Domestic equipments: - Welded steel structure (St-52) - Rollers are driven by 3 separate hydraulic motors - Stepless speed - Special steel gears Dedpfx Acoyv Nnijwjur - Shafts are made of special steel, hardened and ground - Manual lubrication - Guide rollers are hydraulically adjustable - Lower rollers are hydraulically movable up and down - Infinitely adjustable speed of the lower rollers, move after below and above - Digital display for lower rollers - Separate and movable control panel - Horizontal and vertical operation - Production quality certified according to CE, ISO 9001 - 2015, TSEK and TURQUM Additional equipment: - hydraulically adjustable straightening rollers

Condition: new, round material 40 mm tube diameter 70x2 mm square material 80x30x3 mm L-beam 50 x 5 mm roll diameter 157 mm I-beam section - upend 50 x 15 mm I - beam section - flat steel 80 x 16 mm Shaft diameter 50 mm bending speed 2,95 m/min total power requirement 1,1 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation Dedpfxsyv Nk Rj Acwjur - CE mark / Declaration of Conformity - Operating instructions in German

Condition: new, R10-R260 max. 210 ° 54x2 mm Dedpfx Aoyv I Uhocweur 42x2,5 mm 42x3,5 mm 30 mm bending speed max. 4 U/min Amount of programms 30x9 voltage dreiphasig 220-400 V total power requirement 1,1 kW dimensions of the machine ca. 1000 x 410 x 570 mm weight of the machine ca. 80 kg Accessories / equipment: - Machine structure: aluminum alloy - Base: welded steel - Standard accessories (including footswitch, operating instructions)

Condition: new, R10-R260 210 ° bending speed 2 U/min 1 1/4" x 3,5 mm einphasig - 230 V drive motor 1,1 kW < 70 dB weight of the machine ca. 80 kg dimensions of the machine ca. 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed Dedpfeyv I Tkox Acwour

Condition: excellent (used), Pipe bending machine Dedpfx Ajyv A H Eocwour Rothenberger system Bending capacity: 2 7 bending dies for pipes 3/8 - 1/2 - 3/4 - 1 - 1 1/4 - 1 1/2 - 1 3/4 - 2 Footprint: Width: 630 mm Length: 680 mm Transport case dimensions: Width: 700 mm Depth: 300 mm Height: 360 mm Weight: 80 kg

Condition: new, bending speed 2.1 m/min Bending capacity - square 30x30 mm bending capacity - flat iron 80x15 mm Bending capacity - flat iron on edge 50x10 mm tube diameter 1" oder 60x2 mm Shaft diameter - upper 35 mm Shaft diameter - lower 30 mm total power requirement 0,75 kw range L-W-H 650 x 500 x 1300 mm weight 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal Dusdpfx Acoyvvrnjwjr - horizontal and vertical working

Condition: new, L-beam 50x5 mm square material 50x40x3 mm I - beam section - flat steel 120x15 mm I-beam section - upend 60x10 mm round material Ø 35 mm tube diameter Ø 70x2 mm roll diameter 155 mm Shaft diameter 50 mm bending speed 4,3 m/min total power requirement 1,5 kW weight 400 kg dimensions 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal Dujdpfx Acsyvvniswer - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German

Condition: used, Year of construction: 2006, RASI S80.6L - Mandrel Bending Machine - Mandrel and rotary draw bending of tubes and round profiles - Spiral bending of tubes - Includes tooling and documentation - Year of manufacture: 2006 Technical Data - Tube Ø x wall thickness: 82 x 2.6 mm - Max. section modulus: 12.7 cm³ Dodpfx Aoyvvk Docweur - Min. tube Ø: 4 mm - Outer bending radius: 228 mm - Inner bending radius: 34 mm - Min. bending radius: 1.5 x D - Max. bending angle (accuracy ± 0.1°): 195° - Return bending speed (programmable): 0 – 9.3 rpm - Forward bending speed (programmable): 0 – 6.6 rpm - Pressure die: fixed / following - Tool configuration: single-, double- or triple-grooved - Bending direction: right - Feed speed (stepless): 0 – 60 m/min - Feed force adjustment during bending: stepless - Rotation speed (stepless): 0 – 60 rpm - Max. rotation angle (± 0.1°): unlimited - Max. tube clamping force: 8 t - Collet clamping range (diameter): 6.5 mm - Bending length: 3 – 6 m - Motor power: 11 kW - Operating voltage: 400 V / 50 Hz - Control voltage: 24 V DC - Machine length: < 7000 mm - Weight: approx. 2500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. Dusdpsyvhl Hjfx Acwor We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 5,265 h, machine/vehicle number: CV022100123, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 32 mm, overall weight: 275 kg, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, We offer this used BLM E-TURN32 CNC Tube Bending Machine, year of construction 2021. The machine is in good working condition and has been maintained in an industrial workshop. It is available for inspection and ready for immediate sale. Machine model: E-TURN32 Serial number: CV022100123 Year of manufacture: 2021 Supply voltage: 415 V Number of phases: 3 Supply frequency: 50 Hz Total installed power: 11.5 kVA Breaking capacity: 35 kA Control voltage 1: 415 VAC Djdpfjyuf A Esx Acweur Control voltage 1 frequency: 50 Hz Control voltage 2: 230 VAC Control voltage 2 frequency: 50 Hz Control voltage 3: 24 VDC Control voltage 3 frequency: Hz Weight: 275 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,408 h, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 52 mm, type of input current: three-phase, Equipment: documentation/manual, BLM ELECT52B CNC Tube Bending Machine. Electric Servo-Controlled CNC Tube Bender - ideal for high precision production. Key features include electric servo-controlled bending for high precision, heavy duty industrial construction, high efficiency and repeatability for production runs, multi-axis bending capacity, suitable for steel, stainless steel, and aluminium tubing. Dedpeyufp Ssfx Acwjur Machine is in good working condition and has been maintained in an industrial workshop. It is available for inspection and ready for immediate sale.

Condition: used, Year of construction: 1997, tube diameter / mm wall strength / mm bending radius min. / mm ROBOMAC 206 CNC wire bending machine General information Machine model: ROBOMAC 206 Manufacturer: LATOUR / NUMALLIANCE (France) Machine type: CNC wire bending machine / wire forming machine Year of manufacture: 22 December 1997 Serial number / Registration: 9711026 CE marking: present Technical data Working range Wire diameter: approx. 2 – 6 mm Material feed Wire feed length: unlimited Feed accuracy: ± 0.05 mm Revolving arm Positioning accuracy: ± 0.02° Rotation range left–right: infinite Arm length: 600 mm Bending heads Number: 2 Bending radii over mandrel: 1 to 15 mm Bending radii over roller with wire feed: 15 mm to infinite Positioning accuracy: ±0.02° Rotation range left–right: ±360° Programming time: 5 to 15 min. Time required for production changeover Without wire: 0 min With wire: approx. 30 min Power requirement: 6.3 kVA Dimensions Without safety barrier: 2.60 x 2.00 x 1.72 m With safety barrier: 4.50 x 2.00 x 1.72 m Net weight: approx. 2250 kg Typical applications - Wire-formed parts Dujdpfx Asyt R Siscwsr - Wire brackets - Metal hooks - Springs - Technical wire-formed parts for industrial applications Disclaimer All information is provided without guarantee. No liability is accepted for the accuracy, completeness and up-to-date nature of the technical data. Translated with (free version)

Condition: ready for operation (used), A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible. Dusdoyttwnepfx Acwer

Condition: ready for operation (used), Year of construction: 2011, A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible. Duedpfx Acsytgpdewjr