Thate

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 12800 € 245.76 € 3.5 mm 750 mm 2.2 kW 6,1 m/min 2000 mm 600 mm 1400 mm 750 kg 200/1200 mm Rahmen aus geschweißter Stahlkonstruktion Fgjdpfx Acoyq Sn Hswja Klingen aus Spezialstahl Lange Lebensdauer der Messer dank der konisch gelagerten Wellen Getriebemotor mit Bremse System zur Einstellung des Schnittdurchmessers mit motorisierter Leistung Mobiles Steuerpult System zum Schneiden des Innendurchmessers Ausrüstung gemäß CE Regulierungen

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6900 € 133.17 € 2 mm 700 mm 1.1 kW 7,5 m/min 1400 mm 400 mm 1150 mm 360 kg 120 / 1.000 mm Fedeyq Sntopfx Acwsga 280 mm gearbox motor with brake footpedal central lubrication OPTIONAL EQUIPMENT: pneumatic upper roll feed

Condition: used, ca. 12 - 14 Wochen ab Auf Türkei 20000 € 5 mm 1200 mm 4,1 m/min 3000 mm 750 mm 1400 mm 1350 kg 250 / 2000 mm 300 mm Mobile control panel Hydraulic clamp on center Gearbox motor with brake Motorized sheet centering system Fgjdpfx Acsyq Smvswja Inside cutting system According to EC safety regulations Operating manual Optional equipment: 1 spare blade set € 1.200,00 Flanging attachment with 1 set rolls € 2.000,00

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Fgodpjyn Shzofx Acwja Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: used, Circular shear, capacity 1500 x 6 mm Fjdpfjylcbgex Acwjga

Condition: new, Year of construction: 2026, PLC-controlled round and flange ring shear Cutting capacity: 0.5 to 3 mm steel sheet / R 400N/mm² Cutting capacity: 0.5 to 2 mm stainless steel sheet / R 700N/mm² Maximum cuttable diameter: - Starting material (rectangular blank): Ø 1,000 mm - Starting material (octagonal blank): Ø 1,300 mm Minimum cuttable diameter: Ø 100 mm Throat depth at the shear blade station: 250 mm Throat depth at the clamp arm station: 740 mm Shear blade diameter: Ø 70 mm Cutting speeds: 35 and 70 m/min Total connected load: 7 kW Machine dimensions (without safety devices): 2 x 1.6 m x H 1.7 m Fodpfxoyhzm Ds Acwsga Machine weight: approx. 900 kg OPTIONAL: The machine can be equipped with a punching unit, as well as a beading device for a bead height up to 8 mm and a bead radius from 2 mm to 5 mm.

Condition: good (used), functionality: fully functional, Well-maintained and lightly used circular shear from the top manufacturer Prinzing. Fgedpfsx Ekc Hsx Acwea Please refer to the pictures for technical data. A video can be sent via WhatsApp.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Fgsdpfxsxr Utao Acwea Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC circular shear with adjustable blades and diameter adjustment system. Automatic double-station stacker with suction-cup arm and interlocked safety doors. Integrated pneumatic and electrical systems with Unidrive inverters and a single control cabinet. Two control panels—one for each machine group—each with a touchscreen, interconnected to ensure communication and coordination between the LARA and TIMAC sections. Table for sheet scrap removal and LARA shear. Main technical data: Maximum strip width: 1,400–1,600 mm (maximum 1,400 mm on straightener) Sheet thickness: up to 3 mm (carbon steel) / 1.5 mm (stainless steel) Blade diameter: 100 mm Installed power: approx. 16–20 kW Electrical supply: 400 V / 50 Hz Working pressure: 6 bar Overall dimensions (approx.): 8.8 m (L) × 6.8 m (W) × 3.3 m (H) (L-shaped configuration, with side loading and stacking zones)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, control type: manual, degree of automation: manual, actuation type: electric, sheet thickness (max.): 1 mm, workpiece diameter (max.): 1,500 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, type of input current: three-phase, overall weight: 350 kg, Machine: Circular Shears Brand: Fasti Type: 502 / 15 / 1.5 Technical Data: Working diameter min/max mm: 120 - 1500 Strip cutting width min/max mm: 10 - 260 Sheet thickness at 400 N/mm² mm: 1.5 Fgedpfx Acsxp Sd Dswea Drive power kW: 0.75 Weight approx. kg: 350

Condition: used, Year of construction: 2025, cutting capacity 2.0 mm throat 700 / 280 mm Fgsdpfx Aexaa Tuscwea round blank diameter max. 1000 mm round blank diameter min. 120 mm speed 7.0 m/min total power requirement 1.10 kW weight of the machine ca. 360 kg range L-W-H 1400 x 400 x 1150 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven circular shears with large projection - with hardened blades - machine base - manual setting of the desired round diameter - manual material clamping - electric motor brake - 1x freely movable foot switch * including emergency stop button

Condition: used, functionality: fully functional, Year of construction: 1991, Equipment: foot remote control, type plate available, Circular Shears Manufacturer: Prinzing Type: KSE 25/10 Year of Manufacture: 1991 -used- Thrust: 350 mm For sheet metal up to 2.5 mm Sheet thickness - Cutting gap 1.00 mm - 0.05 mm 1.50 mm - 0.10 mm 2.50 mm - 0.15 mm Includes additional replacement blades as shown. Fgodpewmqdgofx Acwoa The machine can be tested/demonstrated on-site under power. All information is provided without guarantee. Subject to prior sale.

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Max. round diameter: 1000 mm Fgodpfx Acswb Efzjwsa Motor drive via footswitch Good condition

Condition: new, functionality: fully functional, Year of construction: 2020, We are selling a new exhibition machine from the manufacturer Sahinler. Motorized circular shear with hydraulic clamping Fjdpfx Asva Acvscwsga Technical data: - max. diameter: 1200 mm - smallest diameter: 220 mm - max. sheet thickness (ST 42): 3.5 mm - max. sheet thickness (Inox): 3.0 mm - Speed: 6.1 m/min - Motor power: 2.2 kW - Weight: 750 kg - Dimensions (LxWxH): 2000x600x1400 mm - Projection in the sheet metal holding stand: 750 mm - Projection in the shears: 250 mm - Knives made of special steel K 2379 - Hydraulic internal cutting system - motorized centering system - central lubrication

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Fgedpou Rimmefx Acwea Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: used, Technical details: cutting capacity: 1 mm round blank diameter max.: 1000 mm cutting capacity: 1 mm round blank diameter max.: 1000 mm Weight approx.: 0,2 t dimension machine xH: 2,0 x 0,5 x 1,4 m Application: manual cutting of round steel sheet parts upper blade Ø 69mm x 11mm; adjustment vertical 25mm with hand toggle lower blade Ø 74 x 15mm; adjustment NO = fixed Centering fixture with die Fgjdpfx Acju Icqyjwoa The material is clamped manually with handle vertival 15mm. Displacement horizontal 500mm manual. *