Box van
VW Crafter 35 TDI Aut. LBW Kamera+Navi+Klima (476

Fixed price plus VAT

€29,990

~~€31,990~~

Condition

Used

Location

Mönchengladbach Germany

Box van VW Crafter 35 TDI Aut. *LBW* Kamera+Navi+Klima (476

VW Crafter 35 TDI Aut. *LBW* Kamera+Navi+Klima (476

Show map

Machine data

Machine type:: Box van

Manufacturer:: VW

Model:: Crafter 35 TDI Aut. *LBW* Kamera+Navi+Klima (476

Condition:: used

Price & Location

Fixed price plus VAT

€29,990

~~€31,990~~

Seller location:: Nordring 50, 41066 Mönchengladbach, Germany

Call

Technical details

Mileage:: 100,000 km

Power:: 130 kW (176.75 HP)

First registration:: 06/2019

Fuel type:: diesel

Overall weight:: 3,500 kg

Color:: silver

Gearing type:: automatic

Emission class:: euro6

Number of seats:: 3

Total length:: 6,204 mm

Total width:: 2,098 mm

Total height:: 2,312 mm

Equipment:: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift

Details about the offer

Listing ID:: A18236211

Reference number:: 4763B

Update:: 18.04.2026

Description

Internal vehicle number: 4763B
----Why autonext GmbH?
One of the largest commercial vehicle exhibitions nationwide
Always over 400 vehicles immediately available at
Largest selection – Best price
More than 1,000 satisfied customers per year – Top customer ratings

WhatsApp Chat:
### Offer: Financing from 4.99% ###
----Excellent condition!
Single owner, German vehicle, non-smoker vehicle
Full service history exclusively with Volkswagen
New brakes front and rear
Automatic transmission
Tail lift
Navigation system
Reversing camera
Automatic climate control Climatronic
LED headlights
Position lights
Comfort Plus driver’s seat
Heated driver and passenger seat
Tires: eight total
Summer tires on steel rims
Winter tires on steel rims
----
Special features:
* Discover Media audio navigation system (touchscreen color display)
* Voice control system
* Mobile phone interface Bluetooth
* Multimedia interface USB (iPhone / iPod) with AUX-IN
* Volkswagen Media Control and App-Connect
* Lockable glove compartment
* Light & Visibility package
* Driver assistance system: High beam control (Light Assist)
* Rain sensor
* Automatic headlight activation
* Light assist (Coming Home, Leaving Home)
* Driver assistance package 2
Ijdjvpu Hxopfx An Usar
* Driver assistance system: Area monitoring system (Front Assist) with City Emergency Braking
* Driver assistance system: City Emergency Braking
* Driver assistance system: Adaptive cruise control with stop function (ACC incl. follow to stop)
* Driver assistance system: Fatigue detection sensor
* Multifunction steering wheel
* Driver assistance system: Lane keeping assist (Lane Assist)
* Climatronic automatic climate control (cab)
* Rain sensor
* Automatic headlight activation
* Light assist (Coming Home, Leaving Home)
* LED headlights
* LED daytime running lights
* Winter package
* Headlight cleaning system (SRA)
* Washer fluid level indicator
* Heated windscreen washer nozzles
* Heated windscreen
* Auxiliary heater (air)
* Second battery with battery monitoring
* Driver/passenger airbag, passenger airbag can be deactivated
* Exterior mirrors electrically adjustable, heated, and foldable
* Suspension: reinforced damping and stabilizers, front and rear
* Remote key (2) foldable
* Vehicle without type designation
* Paint: metallic paint
* Fog lights with integrated cornering lights
* Position lights (roof)
* Preparation for reversing camera
* Reversing warning beep can be deactivated (external warning signal)
* Front mud flaps
* Side airbags / curtain airbags (front)
* Seat upholstery: robust seat covers
* Cab seats: double passenger seat with storage/compartment and backrest foldable as table
* Cab seats: heated driver and passenger seat
* Cab seats: Comfort Plus driver’s seat
* Preparation for third brake light
* Reinforced front axle

Standard equipment:
Anti-lock braking system (ABS), drive type: front-wheel drive, exterior mirror convex, left, exterior mirror convex, right, LED indicators integrated in exterior mirrors, cabin flooring: rubber, onboard tool kit, electronic stability program (ESP), driver assistance system: hill start assist, driver assistance system: brake assist (HBA), power windows front, automatic transmission (8-speed), A-pillar grab handles, interior lighting in cab: LED, body/construction: standard flatbed, fuel tank: 75 liters

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2023

225 listings online

Call

Send inquiry

Telephone & Fax

+49 2161 ... show

Fax:

These listings may also fit your interest.

Listing

Újlengyel

2,069 km

Roll cutter
ASHESapphire Typ 130-60

€25,000

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2002, Maximum jumbo roll width 1300 mm Jumbo roll diameter max 1000 mm (1200 mm without splice table) Winding diameter max 600 mm Operating speed 300 m/min Cutting width possible from 20 mm Year of manufacture 2002 Accessories: - 1 unwind tension shaft D 76 mm - 2 friction winding shafts D 76 mm - 10 upper and lower knives - 1 edge guiding system Iasdpfx Ansxyihno Ujr - 1 cutting table - 1 extraction system for edge trims - silicone-coated guide rollers, suitable for adhesive tapes - with documentation

See details

Listing

Wiesbaden

1,190 km

Bolster/t-slot plate

Call

Listing

Column-mounted jib crane Saeulenschwenkkran

Agios Athanasios

2,779 km

Column-mounted jib crane
Saeulenschwenkkran

Call

Listing

HBC 110 K / 75 kW Bollegraaf Recycling Solutions B.V. HBC 100 K

Netherlands

1,005 km

HBC 110 K / 75 kW
Bollegraaf Recycling Solutions B.V.HBC 100 K

Call

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Iajdpfx Asvf E Avjn Uer Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

See details

Listing

Pallet strapping and film wrapping line Cyklob XZE-3111- GL 2020 pallet conveyin

Helmstedt

1,296 km

Pallet strapping and film wrapping line
CyklobXZE-3111- GL 2020 pallet conveyin

Call

Year of construction: 2004, condition: good (used), Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: Iodjhrmlkopfx An Usar > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request

See details

Listing

Novi Sad

2,207 km

Profile sanding machine
TagliabueLB 2

€10,000

ONO plus VAT

Call

Listing

NC rotary table 1200 x 1200 mm Rückle PKTF 1200

Ellwangen (Jagst)

1,373 km

NC rotary table 1200 x 1200 mm
RücklePKTF 1200

€11,900

Fixed price plus VAT

Call

Condition: excellent (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centring hole: 100 H6 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Slot distance: 160 mm The displacement is measured via a ROD 250 rotary encoder. Condition: Very good (used) Optionally with machine bed (travel = 2000 mm ) About us: Isdpfsfk R Tdex An Uear MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

See details

Listing

Karrenzin

1,325 km

Mower
SpiderIld 2GSG

€25,000

ONO plus VAT

Call

Condition: ready for operation (used), functionality: fully functional, first registration: 06/2021, fuel type: gasoline, color: yellow, Year of construction: 2021, operating hours: 150 h, Equipment: all wheel drive, cable winch, Spider 2SGS large area mower and embankment mower with radio remote control incl. cable winch, bought in mid-2021, first owner, 150bh service recently new, operating instructions + all documentation included, remote control plus 2 times battery, I have only mowed with the mower in the solar park, nothing else. The mower runs great, no complaints. Iajdpfxjtv Rmfo An Uor Just call if you have any questions

See details

Listing

Column swing crane Chain Hoist Demag KBK Kran Drehkran Hallenkran L 4m Demag KBK1 125Kg + Kettenzug

Gondelsheim

1,269 km

Column swing crane Chain Hoist
Demag KBK Kran Drehkran Hallenkran L 4mDemag KBK1 125Kg + Kettenzug

€1,750

Fixed price plus VAT

Call

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Iodpfxeng H T Uj An Uoar Dispatch by forwarding agent or pick-up only by appointment

See details

Listing

Tube bending machines Schwarze-Robitec CNC 80 E-MR

Bodensee

1,257 km

Tube bending machines
Schwarze-RobitecCNC 80 E-MR

Call

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: PC control Beckhoff Technical Specifications: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube centre): 25 mm - Maximum bending radius (to tube centre): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube lift length: 1000 mm - Bending direction: right - Machine weight: 7000 kg - Total installed power: 39 kW - Voltage: 400 V / 50 Hz - Amperage: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube feed and rotation device - Electric mandrel bending device - Pneumatic mandrel rod safety device - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety guard Machine requires repair: The planetary gearbox of the transport trolley is defective and must be replaced. Spare parts costs according to offer: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT Without installation. Cheap sale in current condition – sale as is. Iodpfexzubvjx An Uear Immediately available, free loading onto truck included.

See details

Advertise here