Tipper semi-trailer

TecnoKar semirimorchio vasca ribaltabile 48m3

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. Cgsdpfxsfg E Hpj Afnen • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: used, Year of construction: 2006, operating hours: 9,237 h, Equipment: all wheel drive, Equipment: * Year of manufacture: 2006 * Operating hours: 9,236 h * Power: 157kW / 213 hp * Weight: 19.8 t * Tires: Michelin 23.5-25X Type A approx. 60% Csdpfju D Uvysx Afnogn * Reversing camera * Steering wheel control * Air conditioning * Tow pin * Central lubrication system * Suspension seat * Radio pre-installation Other details: * 1 previous owner * German machine * CAT service records maintained * Last service at 9,003 h * Signs of use * Rust present Since 1972, your reliable partner for all matters concerning automotive and commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke continuously offers approx. 200 vehicles, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options with special low rates. If interested, we will be happy to provide you with an individual quote! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offers generally come WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged by our external partners for an additional fee. The information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typing or data transmission errors. Equipment listed may require separate verification. Subject to prior sale and errors.

Condition: used, power: 294 kW (399.73 HP), overall weight: 78,000 kg, Year of construction: 1997, operating hours: 11,280 h, machine/vehicle number: 72653, Backhoe excavator with digging bucket, extensive documentation available Cjdpfjt S H A Hsx Afnegn

Condition: used, Year of construction: 2022, fuel type: diesel, motor manufacturer: C32 (Remanufactured by Cat), Field of application: Construction Empty weight: 18.221 kg Generator capacity: 1.250 kVA Frequency: 50 Voltage: 230 Transport dimensions (LxWxH): 20 ft HC container Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Cgsdpswgvqfjfx Afnon Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: new, Mobile warehouse customized quotation Cgodoxzrtpopfx Afnon

Condition: ready for operation (used), Percussion Mill MFL Brand: MFL Type: RCL 140-160 Csdpfx Ajkwzp Tofnsgn Feed Opening : 1700 x 1000 mm Driving: E-Motor 250-300 kW.

Condition: used, mileage: 801,000 km, power: 340 kW (462.27 HP), first registration: 05/2009, fuel type: diesel, empty load weight: 11,575 kg, maximum load weight: 14,350 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2009, Equipment: hydraulics, retarder, Intarder XLRAS85MC0E807454 6x2, Euro 5 Leaf/air suspension Wheelbase: 4.80m Cedpfjh D Urpex Afnsgn Austrian vehicle! Tel. 44

Condition: good (used), Resteel Solutions B.V. offers: a demountable commercial building with a surface area of 2,352 m² 42 m wide, 56 m long, 12 m high. Dismantling is scheduled for the end of January 2026. We can deliver this building to your construction site. Visit our website or YouTube channel for more information and a rapidly changing selection of commercial buildings and steel structures. Cgedpfx Afsxz R Dmjnon

Condition: good (used), functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 29,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2006, loading space length: 10,500 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 55 m³, suspension: air, tire size: 385.65 r 22.5, color: red, Year of construction: 2006, Equipment: ABS, sem Menci iron scrap tipping tank 55m3 capacity, menci aluminum frame and reinforced steel OMT case, 3 disc axles with1st liftable and 3rd steerable, ebs, folding tailgate with manual hold-down stops, sliding electric discover cover and pvc sheet, double stainless steel tool box, rear swivel shock guard, 9 Ton tare, year 2006, overhauled until 30.06.2024-CONCESSIONARY INTERDRIVE SRL-PARMA Cgsdpfxett Dyxj Afnsn

Condition: good (used), functionality: fully functional, empty load weight: 7,900 kg, maximum load weight: 30,100 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2007, loading space length: 10,000 mm, loading space width: 2,450 mm, loading space height: 2,200 mm, loading space volume: 60 m³, suspension: air, tire size: 385.65 r 22.5, color: silver, Year of construction: 2007, Equipment: ABS, Smr 60m3 aluminum tecnokar tank tipper, rear with sealed overhead door, front vibro motor, 3 disc axles with 1st liftable and steerable, hydraulic couplings, uncover cover with manual handling cloth, stainless steel box, air suspension, year 2007, overhauled until 30.11.2024-CONCESSIONARY INTERDRRIVE SRL-PARMA Csdpfx Astpm Tmofnsgn