Deionized water system / Water treatment

SUEZ Water Technologies & Solutions MK-3

Condition: used, mileage: 758,560 km, power: 324 kW (440.52 HP), first registration: 08/2013, fuel type: diesel, empty load weight: 12,170 kg, maximum load weight: 13,830 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, trailer coupling, Cylinder: 6, superstructure: grain silo , make: HEITLING, Melle , Year of construction: 2007 , Volume: 31,000 liters (5 chambers) , max. permissible pressure PS: 2.0 bar , min./max. temperature TS: -10 + 50 °C , max. test pressure PT: 2.86 bar , next external test: 03/2023 , next internal test: 08/2023 , compressor make: DRUM , roof hatch , Driver's seat with air suspension , Power windows el. , mirror heating , Electric mirrors , Radio / CD , Telephone prepared Kledpfx Ashpaduoalsp , Plastic mudguards , Full-length brake system , Sun visor , XLX cab , Refrigerator , sleeper couch , Aluminum tank for diesel fuel , Trailing steered lift axle , gross vehicle weight: 26000kg , unladen weight: 12170 kg Subject to alterations, prior sale and errors excepted.

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH Ksdpfx Aaefc I Haoljlp More technical details you found in the Datasheet.

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Kodpsvthdfefx Aalslp

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Ksdpfx Aasq Hr Rzslelp Includes the following components, among others. - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos - Bucket weigher - Dosing screws - Elevators - bunkers - Switchgear cabinets

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used Kodpfoiryyaox Aaljlp - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. Kjdsxghngopfx Aalslp The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control V 6, pedestal for standing arrangement, Cloos welding machine Quinto II 603 ( 600 A), wire feed, welding torch, torch hose package, mech. cleaning, pressure booster 1 rotary tilt table WPK 5000, pick-up weight 500 kg, 1 start preselection, 1 control for customer-provided sliding door Kjdpfjizwv Nsx Aalslp gas nozzle sensor, arc seam search, point editor Unit will be completely overhauled and serviced before delivery. Second station with another, same rotary tilt table possible.

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, Kledpfx Aasvfxqyjlsp 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Ksdpsm E Tvhsfx Aalelp Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: good (used), Water treatment for ISO system from Lenhardt/Bystronic Capacity for large ISO system Dimension: Length: 3100mm Width: 900mm Klsdpom Ux Stofx Aalop Height: 2400mm Weight: about 600kg