Dental Unit

Planmeca Compact I

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Psdpfx Aolht H Eog Djrd Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pjdpfx Agof Epznj Dsrd Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: as good as new (ex-display), Generator unit in an insulated container The system is in absolutely new condition (104 operating hours). Krampitz tank is installed inside the container and filled with 500 l of diesel. Engine: IVECO Generator: STAMFORD Continuous output: 20 KVA / 16 kW Frequency: 50 Hz Rated current: 28 A Voltage: 400 V / 231 V Podoiw Ed Hepfx Ag Dord Speed: 1500 RPM Weight: approx. 4000 kg SÄBU container / Dimensions: 4.00 m long, 2.60 m wide, 3.05 m high - Control panel - Ventilation system for fresh air and exhaust - 700-litre tank - Sound and heat insulated container Loading and transport available as an option. Only serious and genuine inquiries will be answered, with the following information: Name, e-mail address, and telephone number.

Year of construction: 1995, condition: excellent (used), 2 units centrifugal pumps Sulzer MB 80-230/3 Flow rate: 79-89 m³/h Head: 240-230 m Max. temperature: 130°C Predpfx Agod Sybuj Ded Seal: Mechanical seal with flush water connection Drive power: Siemens 90 kW Speed: 2980 rpm ! Price per unit !

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen Prjdet Hagnspfx Ag Dsd

Year of construction: 2012, condition: good (used), Machine has 5600 total spindle hours Datron D 5 Dental - milling machine, year of manufacture 2012, 5-axis simultaneous machining, PC control – Beckhoff, automation / 8 blanks, Predpswvqh Defx Ag Dod milling spindle 1.8 kW, spindle speed up to 50,000 rpm, tool holder HSK C 25, 15-position tool changer, rotary and tilting axis, A axis +/- 25°, B axis +/- 45°

Condition: ready for operation (used), approx. 11 pieces = 44 running meters Number of conductors / number of poles: 4 in standard lengths: 4000 mm for mains voltage up to: 500 V Busbar cross section: 10 mm² Weight: 2 kg / m Pedpfxsd Hapks Ag Djrd Load capacity at 100% ED: 60 A

Year of construction: 1995, condition: excellent (used), 3 units centrifugal pumps Sulzer MB 40-160/5 Flow rate: 32 m³/h Head: 147 m Max. temperature: 130°C Seal: Mechanical seal with barrier water Drive power: Siemens 22 kW Podpfxed Sybpe Ag Derd Speed: 2950 rpm ! Price per unit !

Condition: good (used), Year of construction: 1996, Parts shown by hand not come. Machine have 2 spindles. One for 6.300 min-1 SK 40 Second up to 42.000 min-1 HSK E40. Prsdpjruauqjfx Ag Djd Spindle replaced 2018.

Year of construction: 2009, condition: used, 1 station piston filler Pneumatic driven 15-785ml dosing now equiped 15-100ml as-is or adjusted to customer needs Pjdpfef Rkydex Ag Derd