Sweepers and vacuum cleaning machine

Nilfisk SW 3000 Li-io

Condition: new, including 1x220V 1x3P 32A 1x5P 63A sockets Continuous power: 40 kW / 50 KVA Ljdpfx Acjh Rmvro Aort Engine: Fawde 4DX-65D, 4 cylinder, water-cooled Connection: sockets or circuit breakers Frequency: 50Hz Voltage: 400/230 V including electronic speed control, AVR, battery charger Comap AMF8 control with generator network grid feed in fl protection

Condition: used, operating hours: 10,420 h, functionality: fully functional, machine/vehicle number: ES2234, mileage: 74,155 km, power: 75 kW (101.97 HP), first registration: 05/2016, overall weight: 4,900 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,900 kg, empty load weight: 3,000 kg, next inspection (TÜV): 01/2027, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, Equipment: hydraulics, low noise, soot filter, * Hako Citymaster 2000 vacuum sweeper * from first ownership / former municipal vehicle * Approved as a self-propelled work machine 50 km/h (sticker exempt) * On request, the major engine inspection with timing belt, water pump, oil and filters can be carried out by us free of charge upon sale * New disc brushes * Low emission Euro 5 * 7299 working hours * 10420 total operating hours Lrsdpfsmnp Afjx Ac Aet * 74155 kilometers * VW 2.0 TDI industrial engine (4 cylinders) * Diesel particulate filter * Reversing camera * Switchable all-wheel steering * Sweeping width adjustable from 140 cm to 260 cm * Water pumps for fresh and circulating water * 350 liter fresh water tank * Tiltable stainless steel debris container * ISRI swing seat driver * Yellow rotating beacon * Ready to use condition --- We sell exclusively for our own and under exclusion of any warranty. Errors, changes and prior sale reserved --- * We are there for you Monday - Friday from 9.00 - 17.00, Saturday by appointment, outside these opening hours appointments can be made by telephone. * We will be happy to trade in your current used appliance/vehicle. * Sales to tradesmen and exporters are given preferential treatment, this applies to our entire vehicle stock. * The above information is non-binding, subject to errors, changes and prior sale!

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. Lsdpferbz T Nox Ac Aort The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg surface plate measures: 1500 x 1500 mm Lrodpfjgbt Sqex Ac Aot dumping area: horizontal bis - 145 ° turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg

Condition: new, sweeping width 2000 mm dimensions 2350 x 1450 x 1000 mm weight of the machine ca. 350 kg Lredoulnbqspfx Ac Aet working width 2000 mm, dirt collection tray 300 ltr, Sweeper for forklift, wheel loader, Hoftrac, with leveling and front support wheel, PPN roller brush 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilting device, height-adjustable support wheels with metal rims, hydraulic drive, hoses and couplings. Extra storage on the hydraulic motor, Pockets W/H: 200x70 mm. Weight approx. 350 kg. - Made in Germany, powder-coated. Incl. side sweeper 600mm Ø with drive

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version Lrodpfjtwb U Aox Ac Ast The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: new, including 1x220V 1x3P 32A 1x5P 63A sockets Ljdeh Nqtvspfx Ac Aert Continuous power: 40 kW / 50 KVA Engine: Fawde 4DX-65D, 4 cylinder, water-cooled Connection: sockets or circuit breakers Frequency: 50Hz Voltage: 400/230 V including electronic speed control, AVR, battery charger Comap AMF8 control with generator network grid feed in fl protection

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 320 mm, total height: 2,245 mm, total width: 1,340 mm, total length: 1,140 mm, table width: 240 mm, table length: 1,000 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, rotational speed (min.): 100 rpm, overall weight: 1,000 kg, working range: 650 mm, input voltage: 400 V, distance table to spindle center: 370 mm, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Drilling capacity in steel ----- 50 mm Milling capacity in steel ----- 25 mm Face milling capacity ----- 100 mm Longitudinal travel (X) ----- 585 mm Transverse travel (Y) ----- 185 mm Vertical travel (Z) ----- 320 mm Horizontal motor ----- 1.5 KW Vertical motor ----- 2.2 KW Horizontal milling spindle ----- 60 ~ 1350 rpm (9) Vertical milling spindle ----- continuously variable 100-600 / 350-2000 rpm Spindle mount ----- ISO 40 Table ----- 1000 x 240 mm Weight ----- 1000 KG INCLUDED * DELTA frequency inverter Ljdpfx Aoga Twfec Ajrt * 3-axis digital readout SINO * Automatic longitudinal and transverse feed of the worktable * LED lighting * Cooling system * Deluxe control cabinet * Tilting milling head left/right 0 - 45 degrees * Rotating worktable * Various holders in a case

Condition: used, Year of construction: 2021, operating hours: 2,783 h, mileage: 13,117 km, overall weight: 4,800 kg, fuel type: electric, operation weight: 4,800 kg, maximum load weight: 1 kg, empty load weight: 3,100 kg, tire size: 215/75 R16, total length: 5,280 mm, tire condition: 85 %, front tire size: 215/75 R16 | 85%, rear tire size: 215/75 R16 | 85%, maximum speed: 50 km/h, Tires (front): 215/75 R16, Tires (rear): 215/75 R16, Operating hours: 2783, Battery: Li-ion 63 kWh, Width: 1300, First registration: 02.11.2021, Charger: Integrated 22 kW, self-propelled. Standard equipment of the fully electric CityCat V20e: Cab: Comfortable, sprung-suspended, sound-insulated aluminum cab. Windshield made of heat-insulating, curved, low-reflection safety glass. Two sliding windows in each door. Multi-stage heating blower, sun visors, windshield wipers with washer system. Individually adjustable, sprung driver's seat with headrest and 3-point safety belt. Angle and height-adjustable steering column. Chassis: Two-part ladder frame chassis with "C"-profile construction. Independent wheel suspension with shock absorbers and coil springs on the front axle and leaf spring suspension with shock absorbers on the rear axle. Axles and steering: Electrically driven front axle with self-locking differential (Torsen differential). Articulated steering with load-sensing steering hydraulics. Working hydraulics: Electrically driven hydraulic unit with low-noise gear pumps for steering, auxiliary functions, as well as front and side brush drives. Brakes: Hydraulic dual-circuit servo brake system with disc brakes on the front and rear axles. Parking brake (spring-loaded brake) acting on the front axle. Lrodpfx Aeiwwghjc Aot Drive: Working speed: 0-15 km/h Driving speed: 0-50 km/h *Climbing ability up to 30% Electric drive: 88 kW Electric blower: 8.5 kW Electro-hydraulic unit: 12 kW HV battery: Battery type: Li-ion Battery capacity: 63 kWh Nominal voltage: 335 volts Operating time: up to 10 hours Charging system: Integrated charger: 22 kW Charging connector: Type 2 Charging time: 2 to 3 hours Steering: Hydrostatic articulated steering (right-hand drive), with load-sensing control. Hydraulics: Hydraulic unit with low-noise gear pumps for blower, steering, auxiliary functions, as well as front and side brush drives. On-board power supply: 12 V electrical system, battery 95 Ah. Hydraulic dual-circuit servo brake system with disc brakes on front and rear axles, spring-loaded brake (parking brake) and handbrake valve acting on the front axle. Tires: 4 tires with 215/75 R16C M+S. Dimensions: Length: 4200 mm Width: 1300 mm Height: 1999 mm Wheelbase: 1900 mm Track width: 1090 mm Sweeping width: 2100 mm Sweeping width with 3rd brush: 2700 mm Special equipment: - Lithium-ion NMC battery, 63 kWh, 335V - RAL 9016 white - Suction hose, 4m long (incl. suction pipe), diameter 120mm, with Storz couplings, with hydraulic shut-off valve - Third front disc brush - Brush diameter: 800mm, with front arm, swiveling left and right with hydraulic tilt adjustment - Hydraulic tilt adjustment, both side brushes - Side adjustment of both side brushes, stepless hydraulic adjustment of both brushes individually - Easy clean quick cleaning system for cleaning the KGB side walls, regeneration and leaf grid - Hydraulic side brush pressure regulation for both side brushes with individual side brush lifting, combined - Radio DAB+ with CD MP3, Bluetooth, microphone - Heated exterior mirrors - Brush speed

Condition: good (used), Year of construction: 2016, operating hours: 6,580 h, mileage: 61,850 km, Equipment: air conditioning, Very well-maintained "Schmidt" Swingo 200+ sweeper from first owner! (V223) We are pleased to offer you this excellently equipped sweeper from the world-renowned brand "Schmidt," model Swingo 200+, previously owned by the City of Kropp. The sweeper was purchased in 08 / 2016 and is in thoroughly well-maintained condition – it is virtually rust-free and both visually and technically in good shape. Features include a three-brush sweeping system, all-wheel steering, air conditioning, cameras for reverse operation and suction mouth, as well as a nozzle irrigation system. Lsdpfotz Dhxex Ac Ajrt The tires have been renewed. A service including an oil change and new coolant for the air conditioning was completed in 09/2024. The entire system is in good visual and technical condition, with no significant damage – everything functions as intended. Normal signs of use such as scratches, paint chips, and abrasions are naturally present but do not restrict usability in any way – see pictures. The vehicle has a total mileage of approximately 35,250 km and 4,630 operating hours. The sweeping distance is 6,100 km or 3,780 sweeping hours. The engine has a total of about 6,580 engine hours. Shipping is carried out within three working days after receipt of payment, insured by freight forwarder. Of course, you may also collect the machine during our regular business hours. The total weight of the system, including accessories, is 3,500 kg. The sale is intended exclusively for commercial customers. You will, of course, receive an invoice, although VAT cannot be separately stated, as this is a public sector sale. Private buyers may purchase the machine “on behalf of the customer”; a direct commercial sale to private individuals is expressly not carried out! The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to claims for damages from grossly negligent or intentional breach of duty by the seller, nor for injury to life, body, or health. For any questions about pricing or technical details, please feel free to contact us at the address provided.