Used Streamfeeder Reliant 1500 for sale (4,411)

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: new – warehouse stored (old stock), no signs of operation. Factory-prepared, secured, complete with warning plates. Identification details (nameplate): • Manufacturer: Copeland • Type: D9RS/1500/EWM7000 • Part number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration system / air conditioning • Configuration: Block 1 • Start-up: U. Direct start (Direktanlauf) • Equipment: crankcase heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz Cgjdpfx Afoyga Utsnsn • Speed: 1450 rpm • Displacement: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max operating current (MRA): 28.8 A • Max working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Protection class: IP54 • Year: 1996 Recommended oil: • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new spare part, for modernization of refrigeration or air conditioning installations. Sale as shown in the pictures.

Condition: excellent (used), Year of construction: 2000, Planetary mixer Oru 2250/1500 - year 2000 - 1.5cmb ready concrete - 75cbm/h - 5 aggregate bins with weighting belt - Siemens 7 control Cgodpfsyf Dywox Afnon - construction of the mixer - skip - cement weight - water weight - additive weight - 2 cement screws included

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, HESS RH 1500 2.1 SVA Year of manufacture: 2008 Start: 2009 Very good technical condition. Cedoyb Rvkopfx Afnogn Operating until the end of January. In 2022 a new roller for the upper hopper was installed by Topwerk - Hess. Vibrating table completely overhauled Siemens S7 control 3 molds included Price 195000euro Machine is located in Slovenia

Condition: excellent (used), approx. 1500 m² 1-storey steel construction platformUsed goods, good condition, see picturesManufacturer STOWLength approx. 58.5 mWidth approx. 54.6 mHeight Lower edge 3.4 mHeight Upper edge 3.7 mUp load 500 kg/m²C-profiles and Sigma-profiles and Sigma-profiles fastenedwith screws and nutsRaster distances adjustable in lengthFloor structure is 38 mm chipboard, highly compacted, groove and tongue underside white, upper side grey coatedNegotiation price: Offer on request!Partial sale possible!disassembled and loadedWare in stock.transport costs possible on request.inspection possible at any time by appointment.further information on request.over 5000 linear metres of pallet racks from numerous manufacturers in stock. (Changes and mistakes in the technical data, data and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex stock) Purchase / sale We are looking for, or constantly offer numerous items from various areas broom-clean business clearance business closures quick - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with some keywords and we will get back to you as soon as possible. To get to our site, please click on our logo! Cgsdpfxsd S S N Re Afnjn

Condition: like new (used), 1500 m² storage platform Schäfer R3000 3-story used, top condition, as new, see pictures Ground floor storage platform steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas Csdpfxohzw Hio Afnsgn broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), Year of construction: 2016, operating hours: 210 h, functionality: fully functional, working width: 1,800 mm, type of cooling: water, This Reliant Powerbond HPC, 1800 mm width High Pressure Laminatint Line contain the following unites: - Unit 1 Reliant Powerline non driven unwind unit - Unit 1A Lightweight table designed to support sheets during feeding - Unit 2 Reliant Powerline Powder Coating unit - Unit 3 Reliant Powerline 3000 mm PTFE Conveyor - Unit 4 Reliant Infrared Pre-Heating System - Unit 4A Unwind shaft roll support for surface friction or centre unwinding - Unit 5 Reliant Powerbond-HPC-180 Haevy Duty, High Pressure Laminating Machine - Unit 5A Laminating Line Control Unit - Unit 6 Reliant Powerline Centre Driven Rewind System - Unit 7 Reliant Chiller Unit-I416 More details about the units can be found in the attached pdf file. Loading of the machine on the transport vehicle is included in the price. Cgjdpfjv Tmxnjx Afnon The transportation of the machine should be provided by the buyer.

Condition: ready for operation (used), Year of construction: 1983, operating hours: 6,348 h, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, drill diameter: 50 mm, The machine was overhauled in 2009! TECHNICAL DETAILS Drilling depth: 1,500 mm Drill diameter: 5 - 50 mm Travel X-axis: 1,250 mm Travel Y-axis: 900 mm Travel Z-axis: 900 mm Table length: 1,000 mm Table width: 1,000 mm Max. table load: 3,000 kg Spindle speed: 100 - 6,000 rpm Spindle taper: SK 40 MACHINE DETAILS Control: Siemens 802 D Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,600 x 2,000 mm Weight: 6,000 kg Operating hours: 6,348 h Cgsdpfxeyfhcis Afnjn

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Max ram adjustment: 400 mm Codpfxsygyyio Afnjgn Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: new, Distance between centers 1500 mm Max. swing over bed 560 mm Max. swing over carriage 350 mm Max. swing in gap 788 mm spindle bore 105 mm Spindle Taper Camlock D1-8 Spindle speed 25 - 1500 1/min Travel cross slide 326 mm Travel top slide 130 mm Cedpfx Afsygxb Eonjgn If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, overall weight: 1,970 kg, total height: 1,700 mm, total width: 1,080 mm, total length: 2,700 mm, Distance between centers 1500 mm Max. swing over bed 460 mm Max. swing over carriage 270 mm Max. swing in gap 690 mm spindle bore 80 mm Spindle Taper Camlock D1-6 Spindle speed 25 - 1700 1/min Travel cross slide 290 mm Travel top slide 120 mm Cjdeygw T Hspfx Afnogn If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, A machine video from the production plant will be shared on request. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Cjdpfxjxcbktj Afnogn - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 5 U | Heynumat 5-U | Heynumat 5 U 1500

Condition: ready for operation (used), empty load weight: 7,000 kg, + 3 freeskoppen Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 800 mm Codpfjycy Ekex Afnegn Max travel Z-axe: 500 mm Power on spindle: 15 HP / 11 kW Type of millinghead: ISO 50 Spindlespeeds: 31 > 1400 rpm Table size: 2000 x 600 mm Digital screen: Heidenhain 3 axes

Condition: used, Year of construction: 2008, functionality: fully functional, LOOS International steam boiler / steam generator DF 1500 (06/2008), complete with Weishaupt oil/diesel burner. Capacity 1500 kg/h, PS 31 barg, PT 56 barg, TS 238°C, total volume 250 L, CE 0036. Supplied skid-mounted with control cabinet and instruments (as pictured). In stock, ready for loading. Sold to the first buyer who confirms with advance payment. Cgjdpfx Ajyg Rw Eofnon

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring Cjdpfxoyg I Ihe Afnogn • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment Cedpfx Afsyg I Egenjgn • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,500 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 670 mm, total height: 2,700 mm, overall weight: 5,350 kg, spindle speed (max.): 8,000 rpm, product length (max.): 5,440 mm, number of axes: 3, This 3-axis MICROCUT Challenger VM-1500 was manufactured in 2007. It features a table size of 1,500 x 660 mm, capable of handling a maximum weight of 1,000 Kg. The machine offers X, Y, and Z travels of 1,500 mm, 680 mm, and 670 mm respectively, with a rapid traverse rate of 20 m/min. It includes a BT 40 spindle taper and a spindle speed up to 8,000 rpm. Contact us for more information about this machine. • Table dimensions: 1.500 x 660 mm • Max. table weight: 1.000 kg • X/Y/Z rapid traverse: 20 m/min • Tools station: 24 positions • Max. tool diameter: 80 mm (150 mm) Cgsdoyg Hapopfx Afnon • Max. tool length: 300 mm Technical Specification Taper Size BT 40

Condition: new, The RSM 1500 C, a precision cylindrical grinder from KNUTH, is designed for long and heavier workpieces within the Conventional Cylindrical Grinders category. This robust machine features a large machine bed that supports workpieces up to 2000 mm in length and 320 mm in diameter, ensuring maximum accuracy and stability. Wide, precision-ground guideways contribute to reliable performance, while the grinding spindle with hydrostatic bearings guarantees high precision and surface quality. The powerful motor allows for continuous operation, making it ideal for both individual parts and small series production. Operators can benefit from adjustable dwell times and precise micro-feed control, enhancing the grinding process. With an integrated internal grinding device, the RSM 1500 C offers exceptional flexibility. If you're looking for a reliable solution for cylindrical grinding, request a quote or buy now to experience the efficiency of this powerful Conventional Cylindrical Grinder from KNUTH. Cgsdpfx Asu E N Dnofnen

Condition: ready for operation (used), Year of construction: 2024, total height: 2,500 mm, overall weight: 3,700 kg, This laminating press was manufactured in 2024. It features a robust servo-hydraulic drive system and operates at pressures between 6-8 bar. With a substantial footprint of 1000 × 2500 mm and a working table size of 1500 × 1000 mm, it is ideal for panel processing and interior components. Consider the opportunity to buy this Other COMAG MPM 1500-1000 T6-E laminating press. Contact us for more information. • Pneumatics and hydraulics: • Operating pressure: 6–8 bar • Drive system: Servo-hydraulic drive Cgedpfxeyglkms Afnon • Electrical data: • Electrical connection: 3 × 400 V / 50 Hz • Number of phases: 3L • Maximum power: 30 kW • Maximum current: 100 A • Applications: • Laminating, punching, and edge folding of panels • Trimming and edge foiling of panels • Processing of armrests and central armrests • Production of railings, handles, back covers, and door handles • Typical use: Ideal for panel processing interior components; also suitable for the furniture industry Dimensions Machine Depth 2500 mm

Condition: used, total height: 1,200 mm, total width: 1,200 mm, total length: 4,000 mm, Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Transport dimensions: 4000mm x 1200mm x 1200mm (l x w x h) Cgsdpfownib Tjx Afnen - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, functionality: fully functional, We offer you this used BRIDGEPORT XR 1500 E vertical machining center, year 2007, currently located in Spain. Immediately available. 400 V, 50 Hz Cgedpfx Asygwvbofnsn Rated current 58 A Including 4th axis MAGERL Chip conveyor Spindle operating hours: 12,223

Condition: good (used), mileage: 1,890 km, color: red, lifting height: 30,000 mm, Year of construction: 2017, operating hours: 1,890 h, General information Field of application: Construction Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 1.500 kg Functional Cedpjyaqdlefx Afnsgn Lifting capacity: 1.500 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Delivery terms: EXW Production country: DE Additional information Please contact Michael Overmeer for more information Böcker AHK 30/1500 KS trailer crane construction year 2017 with 1.890 hours from the first owner. Machine is in a nice condition and has among other things: Honda petrol engine, remote controlled wheel drive, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: excellent (used), mileage: 195 km, color: blue, lifting height: 30,000 mm, Year of construction: 2023, operating hours: 195 h, General information Field of application: Construction Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Reconditioned: Yes Cjdpfxsyap U No Afnogn Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Delivery terms: EXW Production country: DE Additional information Please contact Michael Overmeer for more information Böcker AHK 30/1500 KS trailer crane construction year 2023 with only 195 hours. Machine is like new and has among other things: Honda petrol engine, remote controlled wheel drive, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2019, operating hours: 1,667 h, General information Field of application: Construction Drivetrain Drive: Wheel Make of engine: Honda Cgodpfew Tykbex Afnjn Weights Empty weight: 3.490 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: DE Additional information Please contact Vink Machinery for more information Bocker AHK 30/1500 • 2019 • 1667 working hours • Gasoline drive • Remote control • Automatic outrigger • Variable outrigger • Wheel drive • 1500 kg lifting capacity • 30-meter hook height • 25-meter horizontal reach • The fuel engine and printed circuit board were replaced in March 2025

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2019, operating hours: 981 h, Empty weight: 3.475 kg Make of engine: Honda Lifting capacity: 1.500 kg Technical condition: very good Visual appearance: very good Delivery terms: EXW Transport dimensions (LxWxH): 9,312x2,372x2,505 Production country: BE Cedpfsyappysx Afnogn Please contact Vink Machinery for more information Bocker AHK 30/1500 KS • 2019 • 981 working hours • Gasoline drive • Remote control • Automatic outrigger • Variable outrigger • Wheel drive • 1500 kg lifting capacity • 30 meter hook height • 25 meter horizontal reach

Condition: ready for operation (used), X-beweging: 6000 mm Y-beweging: 1500 mm Z-beweging: 2000 mm - 2 hoofden - open kolom! - elektrisch gereviseerd in 2010 - Heidenhain digitale uitlezing - Leroy Somer elektra voor afvoer van tafel - frequentieregeling op alle assen - tafelafmetingen: 6000 x 1800 mm - voldoet aan de huidige (Franse) gezondheids- en veiligheidsvoorschriften Cgjdpfx Asx Ti Uqjfnjn - Belasting op de tafel: 18 ton Machine werd gebruikt in de gereedschapswerkplaats van een autofabrikant. Enkele plano freesmachine Korting op een geldbedrag Fresadoras zijn een soort pilaartjes van een kolom