This 2008 Ingersoll Rand 30kW Variable Speed oil flooded air compressor provides up to 164cfm at 10bar with run hours of 35530. The outlet connection is 1 1/4″ and is 612kg, 1630L x 724W x 1328H (mm)
This Atlas Copco ZT30, 2 stage oil free air compressor provides 163cfm at 7.5bar. The outlet is 1 1/4″bsp connection is 1195kg and 1910L x 965W x 1750H (mm). This compressor is in fantastic mechanical condition, the intercooler pressure is just 2.25bar can be seen running
This Quiet Oil Flooded Screw compressor has very low hours of 8568 and provides 38cfm at 7.5bar, the outlet connection is 1″ and is 227kg, 935L x 732W x 755H (mm). Will suit most small workshops only requires a 3 phase 25amp supply.
An Ingersoll Rand very quiet variable speed oil flooded receiver mounted air compressor with only 7105k hours, provides upto 31cfmat 8bar. The outlet connection is 1″bsp and is 408kg, 1350L x 735W x 1405L (mm). Only requires a 25amp 3 phase supply and will save on power costs when operating at low to medium loads.
The AS36 is a 22kW – 415v – 50hz unit generating 140cfm at 7.5bar (110 cfm at 14bar). It has a 1 1/4″bsp outlet connection is 350kg and is 1420L x 825W x 1075L (mm)
Not the prettiest machine however purrs like a kitten extensive work completed to include:
Air Pressure Switch
Intake Valve Kit
Minimum Pressure Valve Kit
Delivery pipe seal
Rotary screw air compressor Atlas Copco GA 315 VSD FF
290 kW, 9,95 bar, 50,50 m3/min.
Variable speed drive. With built-in compressed air refrigerant dryer.
Volume flow 12,4 - 50,50 m3/min. at 7 bar.
Max. Operating pressure: 10 bar
effective delivery rate at approx. 7.5 bar: 450 l / min
Required drive: 1450 rpm, 4 kW
Drive motor: 380/660 V, 1440 rpm, 5.5
Air chamber volume: 250 l
Required space: 1500 x 600 x 1320 mm
Weight approx .: 250 kg
Only 20 hour of runtime
Power 15 kW
Capacity (m3/min) 8 bar 2.25
10 bar 1.82
Noise level dB(A) 60 +/- 2
Size WxLxH 91x70x112 cm
Weight 225 kg
Please check out our other listings as well.
An Atlas Copco GA50VSD 2004 air compressor, 68K hours however had a full overhaul to include new coolers and hoses, new air end and complete service at 43K hours. 50kW, 415v variable speed. 324cfm max 13bar
Type: at 11-10. B1
Flow rate: 1,500 l / min
Pressure: 10 bar
Power: 11,0 kW
Voltage: 400 V
Air outlet: 3/4 "i
Dimensions W x D x H: 960 x 740 x 1,090 mm
Weight: 242 kg
Location: Off the shelf 54634 Bitburg
used screw compressor
Year of manufacture 2011
Motor 7,5 kW
with refrigeration dryer
Noise level 63 db(A)
Weight 210 kg
Availability: Short term
Kaeser Aircenter SK 22
Type: Aircenter SK 22
Year of manufacture: 2012
Condition: used, ready for use
Load hours: 3300h
Operating hours: 18187h
Pressure 11 bar
Effective delivery rate at 10 bar* 1,68 m³/min
Nominal power drive motor 11 kW
Permissible pressure loss for exhaust air duct 30 Pa
Max. usable warm air volume 2,500 m³/h
Max. usable heat output "warm air" 13.2 kW
Max. usable heat output "Hot water" 9.4 kW
Required supply air opening 0.45 m²
Protection class d...
Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6
No. 6240330200 Year of manufacture 2003
Volume flow 4.6 m3/min.
Pressure output 10 bar
Engine power main engine 30 kW
Power supply 400 Volt, 50 Hz
Connection thread 1 1/2 inch
- 36004 Switch-on hours read
- 19256 Load hours read off
Space requirement L x W x H 1850 x 1050 x 1760 mm
Weight 910 kg
For sale is a screw compressor with accessories
Year of manufacture: 2018
Operating hours: Run 6942h, Load 1409h
Control: Sigma Control 2
With integrated refrigerant dryer
The compressor was used as an add-on, therefore few hours under load! With the sale, the maintenance is made new!
Compressed air filter: Kaeser F26KE
Oil-water separator: Kaeser CF6
Membrane dryer: Kaeser KMM8 from 2019 (new price approx. 5.000Eur)
Optional (not includ...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not assume liability for the content of linked external websites.