Used Italia for sale (3,380)

Year of construction: 2002, condition: used, functionality: unexamined, machine/vehicle number: 2123, TECNOMACO ITALIA / FAMAR AP60 Blister Packaging Machine – Year 2002 TECNOMACO ITALIA S.r.l. – FAMAR AP60 Italian Blister Packaging Machine Year: 2002 Professional industrial blister packaging machine designed for the packing of tablets and capsules in PVC/ALU blister packs. The machine is supplied with: Bwsdpfx Aaozvycno Isu -1 size part for tablets -1 size part for PVC/ALU blister packs, Configuration for 10-cell blister packs, Tooling suitable for capsules size “0” -Blister camera control system which costed 12200 eur in 2018 ) for automatic product inspection and verification inside the blister packs. Camera system installed in a dedicated stainless-steel protective enclosure mounted directly on the blistering machine Stainless-steel construction suitable for pharmaceutical and food-supplement production environments.The integrated camera control is designed to perform a product presence and blister inspection check, helping identify missing, incorrectly positioned, or potentially defective products before the blister packs proceed further in the packaging process. The FAMAR AP60 is a robust Italian-built blister packaging solution suitable for pharmaceutical, nutraceutical and food-supplement production, offering a compact and professional solution for PVC/ALU blister packing. Manufacturer: TECNOMACO ITALIA S.r.l. / FAMAR Model: AP60 Country of manufacture: Italy Year: 2002 Blister format included: PVC/ALU, 10 cells Capsule tooling included: Size “0” Additional tooling: One size part for tablets Inspection system: Blister camera control with stainless-steel protective housing Condition: Used industrial equipment. Sold as seen.

Condition: like new (used), functionality: fully functional, Cream sauce filling machine. A 2-head filling machine suitable for filling creams, sauces, jams, and other liquids. Equipped with a specially designed anti-drip system. Reliable and high-quality machine. Operates with compressed air. Bodpfx Aaez Dgy To Iswu

Condition: used, Year of construction: 2020, operating hours: 87 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input current: 2 A, Equipment: type plate available, Used FINIMAC blasting cabinet/shot blasting machine for sale, model V1, manufactured in 2020 (serial number 2733), by FINIMAC (Vittuone, Milan, Italy). Second-hand equipment, with very little use – the internal counter registers approximately 87 operating hours. Cabinet with inspection window, two work gloves for handling parts, control pedal, pressure gauge, and its own control panel (main switch, emergency stop button, and hour counter). 400V three-phase power supply. Internal identification "M63". Condition: used equipment (not new/factory), functions normally, tested and operational. Bjdozvdfmspfx Aa Iowu

Condition: used, Year of construction: 2008, machine/vehicle number: 654/08, functionality: fully functional, Used automatic edge bander with pre-milling unit. Robust machine designed especially for solid wood edges and lippings. Bwjdpju T Nhmsfx Aa Iou - Control via LCD touch panel - Heavy-duty chain feed conveyor - Automatic thin edge feeding from magazine - Solid edge magazine - Pre-milling of panels using 2 cutter heads (with insert knives) - Glue preheating in a separate tank - Reinforced pressure zone with 5 pressure rollers - End trimming with 2 saw blades - Top and bottom trimming Technical data: - Min./Max. edge height: 14 / 104 mm - Min. edge thickness: 0.4 mm - Min./Max. panel thickness: 10 / 100 mm - Feed speed: 12 m/min - Min. working length/width: 200 / 85 mm - Milling tool speed: 12,000 rpm - Dimensions: 5250 x 1100 x 1650 mm - Weight: 2000 kg The machine has been used and tested. It is operational but requires maintenance, cleaning, adjustment, and sharpening of the tools. Sold in its current condition.

Condition: good (used), Year of construction: 2000, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 20FT ISO CRYOGENIC TANK CONTAINER Manufacturer: Air Liquide Italia S.r.l. ISO Code 6346: 22KW IMO Portable Tank IMO Type 7 Transport Instructions: T75 ADR RID Tank Code: R11.7BN ISO Code 6346: 22KW Max. working pressure: 8 bar Hydr. test pressure: 11.7 bar Design Temperature: min -196 °C Material (Inner & Outer Vessel): High-grade Stainless Steel (X5CrNiN1810 UNI 7500) Insulation: Vacuum Double Envelope (Excellent current vacuum: 0.052 mbar) Safety Valves: 2x Herose Relief Valves (Set at 8 Bar) (p. 1) Vaporizers: Included & complete with piping Last Inspection: June 9, 2026 (5-Year Periodic Inspection by Bureau Veritas) Next Inspection Due: 12-2028 CSC Validity: Until 12-2028 (p. 1) Bwjdpfxezd Sauo Aa Isu Approval/Regulations: IMDG, ADR, RID, CSC, US DOT (p. 1) = Further Information = Year of Construction: July 2000 Model Year: 2000 Usable Material: Gas Unladen Weight: 8,300 kg Payload: 25,700 kg GVW: 34,000 kg Technical Condition: good Optical Condition: good Please contact Arne Honingh for further information.

Condition: used, functionality: unexamined, Year of construction: 2001, machine/vehicle number: 3533, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, For sale: a custom-made cutting and marking line (using disc/circular saw) for round and square tubes, manufactured in 2001 by Simec Srl (Schio, Vicenza, Italy). The system consists of a Simec bar feeder "Caricatore BM" (serial number 3587) that feeds the main Simec unit "MEC 120 MI" (serial number 3583), with a disc cutting station identified with the FAT logo. The line includes a workbench with guides and measuring scales, a collection box for cut pieces, and a roller table for material transport. The structure is mounted on legs and features its own control panel (Siemens Simatic OP3 interface and Rovan Elettronica counter/display), manual control buttons, a mode selector, pressure gauges, and a three-phase electrical connection. Condition: it was in operation until approximately 1 year ago; the current condition has not been recently verified or tested. Inspection/testing by the buyer is recommended before purchase. Bjdpfjzvc Utex Aa Iewu

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Bwsdpfxez Dtcbj Aa Ieu Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), Manual band saw with a cutting length of up to 5,800 mm - Max. log diameter: 790 mm - Max. board width: 790 mm - Max. cutting length: 5,790 mm - Min. cutting length: 900 mm - Saw blade stroke (min./max.): 20/540 mm - Max. cutting depth: 220 mm - Diameter/width of the guide wheels: 480/30 mm - Motor power: 7.5 kW (10 hp) - Manual height adjustment of the saw head Bwsdpfxsznd R Tj Aa Isu - Saw blade: 3,960 x 34 x 0.9 mm - Saw blade speed: 15 m/s - Overall length: 6,000 mm - Weight: approx. 380 kg NEW MACHINE

Condition: good (used), CMC Italia Gemini Gem 52 Case in gluer Machine in perfect condition, like new. Manufactured by CMC Italia, Italy. This gluing device allows for the application of glue to both sides of the book block. Two gluers, smooth glue thickness adjustment. Chrome rollers, adjustable glue thickness. Bjdpfx Aajzlggls Iowu Very easy to clean. Working width: 520 mm Power supply: 380 V Weight: 250 kg Made in Italy.

Year of construction: 2022, operating hours: 728 h, condition: used, functionality: fully functional, cutting depth: 215 mm, spindle motor power: 15,000 W, saw blade diameter: 625 mm, number of axes: 5, Prussiani Engineering ITALIA 5-axis CNC bridge saw, manufactured in 2022, with approximately 728 operating hours. Bjdpoz Di Awofx Aa Iswu The machine is fully functional and equipped with Fagor CNC control. Designed for precision cutting and processing of marble, granite, natural stone, engineered quartz and ceramic slabs. Key details: Manufacturer: Prussiani Engineering Model: ITALIA Year of manufacture: 2022 Operating hours: approximately 728 Machine type: 5-axis CNC bridge saw Control system: Fagor CNC Condition: Used Functionality: Fully functional

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 2,938 mm, total height: 1,622 mm, total width: 888 mm, compressed air connection: 8 bar, air demand: 100 m³/h, roll width: 480 mm, air pressure: 6 bar, film width: 480 mm, product height (max.): 120 mm, We offer this Italian Pack ITALIAN PACK Perseus VAC II packaging machine in very good condition, manufactured in 2019. Parameter Typical value for Perseus VAC Machine dimensions approx. 2938 × 888 × 1622 mm Max. tray height 120 mm Film roll width max. 480 mm Roll diameter approx. 250 mm Bwjdoz Eci Hspfx Aa Isu Required compressed air 6–8 bar Vacuum pump standard approx. 100 m³/h Performance approx. 5–15 cycles/min, depending on the process Length of the infeed zone approx. 1648 mm The machine has two tools and two GN 1/2 and GN 1/4 molds. If you have any questions or require further information, please send a message or contact us by phone.

Year of construction: 1997, condition: used, Manufacturer: G.B.P Snc ItaliaType: three-roll millMaterials: stainless steelModel: R80Year: 1997Power: 0.37 kW3 cylinders, Ø 80 x 250 mm Bwsdpfsy D Ug Hjx Aa Isu

Condition: good (used), Code: 0072 Brand: T.O.P. ITALIA Model: FS 850 - CE Standard Drilling and inserting gluing machine + dowel pins on horizontal workpieces for furniture, custom-made furniture, kitchens, bathroom furniture - CE Standard - Year 2018 Bwjdoyv Inzspfx Aa Iou Technical data: Maxworkable length mm 1600 Max workable height 850 Panel thickness mm 8 - 50 Independent drilling aggregate: Rotation speed 6000-18000 rpm - Max drilling depth mm 35 - Drilling depth adjustment - Hole cleaning system Glue + dowel insertion unit: Dowel dimensions mm 8 x 30 - Max dowel protrusion 15 mm Glue and water system: Container for automatic glue feeding and system cleaning Feeder for automatic pin loading Numerical control and operator interface: Albatros numerical control for 4-axis control - Touch screen supervisor PC - Monitor 12" TFT - Windows operating system - Parametric CAD 3D TPAEdi32 Compressed air 6 bar Overall dimensions mm 1800 x 1900 x 2100 h Weight kg 500

Condition: new, functionality: fully functional, drilling depth: 55 mm, rotational speed (min.): 2,800 rpm, power: 3 kW (4.08 HP), table height: 875 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, High productivity for drilling furniture sides Bwjdpfx Aajzp H Nzo Ieu The MAGGI Boring System 46 is a semi-automatic multi-spindle drilling machine, equipped with two parallel vertical heads, each with 23 drilling spindles. It is the ideal solution for furniture manufacturers who frequently drill holes in the sides of cabinets, bookshelves, wardrobes, or shelving units. Thanks to the two drilling heads, the machine drills two parallel rows of holes in a single work cycle, significantly reducing production time compared to a machine with a single head. Manufacturer MAGGI – Italy Number of spindles 46 pieces Spindles left - right 11 left, 12 right Distance between spindles 32 mm Distance between outer spindles 145 – 625 mm Distance front unit-fence 15 – 494 mm Distance rear unit-fence 160 – 639 mm Maximum vertical drilling depth 55 mm Maximum drilling tool diameter (Ø) 40 mm Drill shank diameter (Ø) 10 mm Hydraulic piston stroke 70 mm Maximum panel thickness 50 mm Maximum workpiece size 3000 x 700 mm Table height from the ground 875 mm Workpiece clamping pistons 6 pieces Number of motors 2 pieces Motor power 2 HP/ 1.5 kW Motor speed 2800 rpm Required air pressure 6-8 bar Air consumption 20 l/cycle Exhaust hood diameter (Ø) 80 mm Overall dimensions 1206 x 1180 x 1163 mm Net weight 366 kg Supply voltage 400 V – 3 Phase – 50 HZ

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 105 mm, turning length: 1,500 mm, turning diameter over bed slide: 600 mm, swing diameter over cross slide: 365 mm, quill diameter: 68 mm, spindle speed (max.): 2,200 rpm, feed rate X-axis: 10 m/min, feed rate Z-axis: 12 m/min, travel distance X-axis: 310 mm, travel distance Z-axis: 1,500 mm, spindle diameter: 250 mm, workpiece diameter between centers: 365 mm, distance between centers: 1,500 mm, CNC ECS 2400 Center height above the bed: 300 mm Spindle nose: CAM LOCK 8" Spindle bore diameter: 105 mm Spindle motor power – S1/S6: 9/13 kW Spindle speed ranges: 2 with automatic change Maximum spindle speed: 2200 rpm Spindle speed at constant power: 75/2200 rpm Spindle speed at constant power (I range): 10 + 75/430 rpm Spindle speed at constant power (II range): 40 + 380/2200 rpm Maximum spindle torque: 1650 Nm Maximum diameter on the bed: 600 mm Maximum diameter on the carriage: 365 mm Nominal distance between centers: 1,500 mm Bwedjz Ig T Ijpfx Aa Iju Controlled travel of axis "X": 310 mm Controlled travel of axis "Z": 1,500 mm Rapid traverse rate of axis "X": 10,000 mm/min Rapid traverse rate of axis "Z": 12,000 mm/min Continuous feed force of axis "X": 300 daN Continuous feed force of axis "Z": 1000 daN Tailstock bore diameter: 68 mm Tailstock travel: 220 mm Axial thrust of the tailstock: 1,200 daN Supply voltage: 400 V (50 Hz) Total installed power: 20 kW Machine complete with: • Self-centering chuck, Pinto, diameter 250, 3+3 jaws • Electric tool turret, 8 positions • Fixed steady rest • Operation and maintenance manuals • CE declaration of conformity

Condition: like new (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,000 kg, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 25,000 W, spindle nose: HSK 63A, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, KEY FEATURES: table dimensions 1200 × 600 mm table load 1,200 kg axis travels X 1,050, Y 600, Z 600 mm HEIDENHAIN i-TNC 530 CNC (color LCD screen), advanced conversational programming high-speed package RS 232 serial port, USB slot, RJ 45 Ethernet network port and hard disk Rapid traverse rates 40 m/min on all axes Working feed rates up to 20 m/min Cooled ball screws weight 7,000 kg HSK 63A electrospindle, 20,000 rpm, 25 kW, chiller-cooled remote handwheel RENISHAW tool control laser 30-position random tool changer standard equipment tool holder set (at least 10 pieces) integrated fume extractor high-pressure coolant through the spindle coolant tanks with pumps, chip conveyor operation, maintenance and programming manuals, electrical diagrams Bwjdpfxoz D Alle Aa Isu CNC manuals CE certificate leveling feet

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 426P, table width: 490 mm, table length: 1,150 mm, table load: 900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, spindle nose: BT 40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Heidenhain TNC 426P WORKING AREA: Longitudinal X: 1020 mm Bwsdpfoz Iadyjx Aa Iou Transverse Y: 510 mm Vertical Z: 500 mm Rapid traverse rate for X, Y axes: 40 m/min Rapid traverse rate for Z axis: 25 m/min SPINDLE: Spindle power: 19 kW Maximum rotation speed: 10,000 rpm Spindle taper: BT 40 TABLE: Surface area: 1150 x 490 mm T-slots: 5 slots at 100 mm intervals Maximum load capacity: 900 kg TOOL CHANGER: Magazine positions: 30 Tool change time: 3.5 sec Maximum tool weight: 6 kg Maximum length: 250 mm Maximum diameter: 80 mm Machine complete with: • Chip conveyor • Operating manuals and CE declaration Year of manufacture: 1997

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Bwsdjx H Rmujpfx Aa Isu Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, mileage: 151,000 km, first registration: 10/2017, fuel type: diesel, fuel: diesel, color: white, gearing type: automatic, number of seats: 3, Year of construction: 2017, Equipment: air conditioning, ISUZU N35 YEAR 2017 KM 151,000 THREE-WAY DUMP TRUCK Bsdpfx Aaoz Imi Aj Iswu AIR CONDITIONER AUTOMATIC TRANSMISSION PAYLOAD 700 KG TRUCK BED DIMENSIONS: 3580X1900X400 €22,000.00 + VAT 24-MONTH WARRANTY

Condition: used, Year of construction: 1997, operating hours: 30,000 h, functionality: fully functional, total width: 4,000 mm, total length: 9,500 mm, total height: 2,500 mm, overall weight: 26,000 kg, Automatic die-cutting machine with stripping function. Bwodpfx Aasz Ibhgo Isu Minimum sheet size: 420x450mm Maximum sheet size: 1070x1430mm Requires inspection/servicing.

Condition: excellent (used), Year of construction: 1990, SCM P64 Four-Sided Planer Infeed table length 2300 mm Planning width 180 mm Planning height 105 mm Bwodpfxez Ii A Es Aa Iou Feed rate 6 and 12 m/min Spindle diameter 35 mm Axial adjustment of the planing head for profiling 15 mm Motor power, infeed side 4 kW Motor power, thicknessing roller 4 kW Motor power, right and left rollers 5.5 kW Weight 1200 kg Dimensions 2820 x 1220 x 1920 mm Condition: Functionality tested.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Bodpfx Ajzr D Dnoa Iewu

Year of construction: 2006, condition: good (used), machine/vehicle number: 3206, HEAT TREATMENT FURNACES CMS ITALIA model DMH 7, MFG: 2006, serial no. 3206 Bwjdpfx Aoldfgpja Ieu - installed power 15Kw - supply voltage 220V - maximum temperature 1000 °C; - useful width 450 mm - useful height 250 mm - room depth 800 mm - current absorption 39.5 A - frequency 50 Hz Price Euro 4.300 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2017, operating hours: 6,100 h, Used Lectra Vector VT-FA-iQ50-71 automatic cutting machine, year 2017, effective cutting width: 180 cm, maximum thickness: 5 cm, operating hours: 6100, with traversing table. The machine does not have a software license, so it is necessary to contact Lectra to obtain a new software license and training. The machine is in excellent condition. Bsdpfx Asz D Nkboa Iewu

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 6 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 11,000 mm, total height: 5,430 mm, total length: 16,630 mm, table length: 2,500 mm, table width: 2,500 mm, torque: 2,045 Nm, table load: 40,000 kg, coolant supply: 40 bar, workpiece weight (max.): 40,000 kg, grinding spindle motor power: 46,000 W, rotary table diameter: 2,500 mm, Equipment: documentation/manual, CNC HEIDENHAIN iTNC530 Drive system: SIEMENS SINUMERIK TRAVEL Longitudinal (X): 10,000 mm Vertical (Y): 3,500 mm Cross (Z): 1,500 mm Table (V): 1,500 mm Axis support: Hydrostatic FEED RATES Working feed rates: 0 – 6,000 mm/min Rapid traverse rates for axes Y/Z/X: 25,000 mm/min SPINDLE Ram section: 700 x 500 mm Power: 46/37 kW Rotation speed: 5,000 rpm Torque: 1,691 – 2,045 Nm Morse taper: ISO 50 ATC Number of positions: 100 CLAMPING SURFACE: Dimensions: 10,000 x 2,500 mm Load capacity: 10,000 kg/m² TABLE Surface: 2,500 x 2,500 mm Travel: 1,500 mm Resolution (B-axis): 0.001° Load capacity: 40,000 kg Support: Hydrostatic HEAD Bwedjz Ib Elepfx Aa Iju Type: TUPC Spindle taper: ISO50 A/C axis: 0.001° Maximum torque: 1,210 Nm Maximum speed: 5,000 rpm Maximum power: 46/37 kW Coolant: Internal, 40 bar HEAD 2 Type: SEELS4 Spindle taper: ISO50 Spindle extension: 400 mm HEAD CHANGING PICK-UP STATION Positions: 3 Maximum workpiece weight: 79.3 kg Machine dimensions: 16,630 x 11,000 x 5,430 mm Year of construction: 2008 ACCESSORIES: - 3-position head changer - High pressure, 40 bar - Filtration system - Chiller - Renishaw RMP60 probe - Blum tool presetter - Electrical diagrams - Perimeter guarding - Chip conveyor - Operation and maintenance manuals - CE certification