Box van

MERCEDES-BENZ Sprinter 516 Möbel Maxi 4,98 m. 28 m³ No. 316-35

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: LEUT Wood-Alu 110mm Godsg Tumyopfx Acisbt Hole 50mm. All complete. Very good condition. Available as a set. Possible to buy also separately.

Condition: new, Year of construction: 2026, total width: 680 mm, total length: 780 mm, total height: 670 mm, maximum load weight: 15 kg, tank capacity: 105 l, warranty duration: 12 months, inner dimension height: 400 mm, inner dimension length: 600 mm, inner dimension width: 500 mm, Tank dimension: (lxwxh) 900 x 600 x 500mm Total dimension: (lxwxh) 1.080 x 780 x 750mm Wash tray outside dimension: (lxw) 840 x 540mm Loading cap. 60kg Filling volume cap. 240 Liters Ultrasonic Power: 12KW two ultrasonic activators, sidewards mounted heating power: 6KW, 30-70°C Electrical power 400V/50Hz Drainage valve, overflow valve, electrical heating, Generator with booster function, Frequency 40kHz, niveau control, incl. manual cover, incl. tray Gbsdpjx E S H Tefx Acijt without optional lifter function

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions Gbodpfx Acet Tqy Eeist drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, power: 125.03 kW (169.99 HP), fuel type: diesel, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,215 mm, color: white, emission class: euro6, number of seats: 3, loading space volume: 21 m³, loading space length: 4,400 mm, loading space width: 2,110 mm, loading space height: 2,260 mm, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), onboard computer, spoiler, traction control, ALUMINIUM DROPSIDE VAN 8 EPAL Brand new, ready for registration and immediate delivery, this aluminium dropside van is specifically designed for the distribution of general goods. The New Renault Master 170.35, Red Edition, 2025 version, features a Renault 2000 cc engine delivering 170 HP, EURO VI-E compliant, and comes equipped with air conditioning, Bluetooth radio, 10-inch touch screen, cruise control, spare wheel, front-wheel drive, single rear wheel, and a ribbed aluminium box body with internal dimensions of L 440 cm x W 210 cm x H 226 cm, suitable for loading 8 EPAL pallets, with a payload of 770 kg. The body floor is marine-grade plywood with plastic-coated lining, and there is a cab-top spoiler. Also available for long-term rental. Scroll for more details on this aluminium dropside van. PRODUCT CODE: N-712B TYPE Chassis EURO EMISSION STANDARD EURO VI-E GROSS VEHICLE WEIGHT 3500 kg ENGINE 2000 CC Brand Renault Trucks INTERNAL USABLE DIMENSIONS L 440 cm x W 211 cm x H 226 cm PAYLOAD 770 kg POWER 170 HP RANGE Master TRANSMISSION 6-speed manual BODY TYPE Aluminium van FUEL Diesel WHEELBASE 4215 mm Godpfx Acexd Aqkeiebt

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Gbedpfx Ajv D Rg Dociot Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di... Godpfx Asvnv Tqecijbt

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Gbedpfx Acjv Dfp Heiot Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane chain hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Steel beam: included in the offer Gsdpfshwd E Nox Acijbt Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Tecnoaspirazioni overhead painting chain, complete with towing device, tracks, and poles. Length approximately 220-240 meters. Gbsdpfsit Umfsx Acijt

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush Gbjdpfx Asxfl Eaeciot max. sanding width 300 mm max. sanding height 200 mm year of manufacture 1994 with CE mark