Standard tractor unit
MERCEDES-BENZ Actros 1843 Zgm 4x2 Euro 6 Bj 2015

Name: MERCEDES-BENZ Actros 1843 Zgm 4x2 Euro 6 Bj 2015
Brand: MERCEDES-BENZ
Price: 21900 EUR
Availability: InStock

Fixed price plus VAT

€21,900

Condition

Used

Location

St.Lorenz

Standard tractor unit MERCEDES-BENZ Actros 1843 Zgm 4x2 Euro 6 Bj 2015

MERCEDES-BENZ Actros 1843 Zgm 4x2 Euro 6 Bj 2015

Machine data

Machine type:: Standard tractor unit

Manufacturer:: MERCEDES-BENZ

Model:: Actros 1843 Zgm 4x2 Euro 6 Bj 2015

Condition:: used

Price & Location

Fixed price plus VAT

€21,900

Seller location:: Keuschen 46, 5310 St.Lorenz, Austria

Call

Technical details

Mileage:: 551,759 km

Power:: 315 kW (428.28 HP)

First registration:: 05/2015

Fuel type:: diesel

Overall weight:: 18,000 kg

Axle configuration:: 2 axles

Brakes:: retarder

Color:: white

Gearing type:: automatic

Emission class:: euro6

Equipment:: ABS, air conditioning, electronic stability program (ESP), parking heater

Details about the offer

Listing ID:: A10720424

Update:: 11.06.2026

Description

Special Equipment:

Axle load measuring system, audio system: CD radio (Bluetooth), air horn, cab width: 2.50 m, suspension: front springs 7.5 t, 2-leaf, tinted windscreen, information display 10.4 cm with additional indicator, integral rear end, comfort upper bunk, narrow, fuel tank: 390 L aluminum, fuel tank: combination tank aluminum - 820 L diesel + 90 L urea solution (AdBlue), air intake behind cab, roof and side air deflectors (lockable), spare wheel, retarder, acoustic reversing warning (external warning signal), cab seats: comfort driver's air suspension seat, external sun visor, additional 24V socket in passenger footwell, Fleetboard preparation

Additional Features:
-EURO 6 emissions standard, axle configuration: 4x2, front axle load 7.5 t, Actros 4, trailer socket 24V / 15-pin, work lights, exhaust outlet to right side, electric & heated exterior mirrors, rear axle differential lock, steel air reservoir, medium compressed air unit, cab: L StreamSpace, cab: steel-sprung, comfort, suspension: leaf / air, suspension: aluminum front spring bracket, electric windows, alternator 100 A, 12-speed transmission - type: G 211-12, rear axle crown wheel 440, body/build: tractor unit, lower comfort bunk, central locking system, communication interface, 3-piece mudguard, radiator grille, regulated power steering pump, 2-stage air compressor, engine 10.7 L - 315 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, ramp mirror, residual heat utilization, disc brakes on front and rear axles, seat cover/upholstery: fabric, cab seats: functional passenger seat, cab seats: foldable driver's seat backrest, voltage converter 24V / 12V 10A, front splash guards, front axle stabilizer, external left storage flap, cab 24V socket, tachograph / EC control device, cab door extension, aerodynamic underbody cladding, front underrun protection, CB radio preparation, toll recording preparation, cranked front axle, regulated water pump, permissible gross weight 18.00 t, additional water heater, parking heater

* VIN: WDB9634031L930383
Fgodomiggkjpfx Ab Njd
* Parking heater
* Parking air conditioning
* Retarder
* First registration: 20.05.2015
* Net price
* All information without guarantee

Tel./WhatsApp:

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2022

135 listings online

Call

Send inquiry

Telephone & Fax

+43 6232 ... show

These listings may also fit your interest.

Listing

Germany

1,192 km

HERMLE C 600 U
HERMLEC 600 U

Call

Condition: ready for operation (used), Year of construction: 2000, operating hours: 38,515 h, spindle speed (max.): 10,000 rpm, overall weight: 6,500 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 426, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It features an X-axis travel of 450 mm, Y-axis travel of 300 mm, and Z-axis travel of 400 mm, providing versatile machining capabilities. The machine is equipped with a HSK 63 tool holder and a Heidenhain iTNC 426 CNC control for precision operations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U universal machining centre we have for sale. Contact us for further details. Fgjdoyz Tygepfx Ab Ned • Interference circle (Störkreis): 400 mm • Operation voltage: 400 V (3 phase, 50 Hz) • Control voltage: 24 V (DC) • Total nominal current: 63 A • Total power rating: 42 kVA • Spindle on: 38,515 hours • Axes in motion: 36,413 hours • CTS • Chip conveyor Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes

See details

Listing

Simultaneous 5-axis CNC machining center HERMLE U 1130 Simultan

Mindelheim

1,445 km

Simultaneous 5-axis CNC machining center
HERMLEU 1130 Simultan

Call

Condition: used, Year of construction: 2007, operating hours: 33,122 h, Hermle simultaneous 5-axis CNC machining center Type/Model: U 1130 Condition: Used Year of manufacture: 2007 Fgjdpfszfg U Nex Ab Njd Operating hours: 33,122 h Spindle hours: 12,054 h Technical data: Travel range X/Y/Z: 1130 (1300) mm x 720 mm x 630 mm Feed rate: Manual / setup mode: 1 - 2000 mm/min Programmable X-Y axis: 1 - 30000 mm/min Programmable Z axis: 1 - 20000 mm/min Rotary table: Tool interface: SK 40 Total connected load: 32 kW Space requirement (L/W/H) approx.: 3.66 m x 4.38 m x 2.57 m Weight approx.: approx. 10 tons Equipment: - Heidenhain iTNC 530 control system - Heidenhain TS 640 infrared measuring probe - 16-position tool changer - incl. SK 40 tool interface plus various tools - Machine vise - IKZ (internal coolant supply) - Paper band filter - Oil cooler - Chip conveyor - Control cabinet air conditioning - RS 232 interface - LAN interface Costs for delivery by freight forwarder to the curb, see shopping cart or individual offer for inquiry items.

See details

Listing

Austria

1,192 km

DOOSAN Puma 2500XLY
DOOSANPuma 2500XLY

Call

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment • Documentation/manual Machine Benefits Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm • Spindle bore: 86 mm • Tool holder: 55 mm • Speed infinitely adjustable Fgodpfsx D H Aqox Ab Ned Extra Information Machine still under powerClamping range 30–150 mmMaximum opening 170 mmMeasuring arm for tool measurement

See details

Listing

Roller leveller DREHER 1645-AV Modell 738

Eislingen/Fils

1,357 km

Roller leveller
DREHER1645-AV Modell 738

Call

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via Fjdpfx Ascxxx Rsb Nogd analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

See details

Listing

Germany

1,293 km

Tracked Excavator
Fiat-HitachiFh 220

€15,000

Fixed price plus VAT

Call

Condition: used, operating hours: 22,327 h, Fiat-Hitachi Fh 220 | Used Tracked Excavator | 22327 hours 📍Location: Germany, Meppen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 37 approved ✅ 19 imperfect ℹ️ 7 issues ⚠️ Fsdpfx Abox N Havs Nogd 📌 Inspector's Comment: Heavily used machine. Air conditioning not available. Windshield wiper is defective. Ventilation of the hydraulic oil is defective. Operating hour meter is defective; no reliable information available. Track shoes can be cut at an additional cost to reduce transport width. The year of construction is unknown and cannot be verified. The operation manual states 1980 or 1990, but this cannot be confirmed. The operating hour meter is from another machine, the displayed hours are incorrect. The machine has possibly between 20,000 and 30,000 hours. The cabin has been replaced and is not original. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39638 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

See details

Listing

Band saw KASTO - KASTOtec A3 KASTO KASTOtec A3

Babberich

984 km

Band saw KASTO - KASTOtec A3
KASTOKASTOtec A3

Call

Condition: good (used), Year of construction: 2001, Cutting 90°: 330 Cutting flat 90°: 330 x 330mm Cutting speed Vario:12 - 120 Circle blade size: 6830 x 41 x 1,3mm Fgedou R R Acepfx Ab Nod Power: 7.5kW Length: 4600mm Width: 2150mm Height: 2310mm Weight: 4300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Welding turn table, high adjustable Protec KT 600 HV

Hergensweiler

1,423 km

Welding turn table, high adjustable
ProtecKT 600 HV

Call

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Fsdpod Anz Rofx Ab Nsgd Very robust

See details

Listing

Universal 5-axis machining center Spinner U5-1520

Cascina Faustina

1,524 km

Universal 5-axis machining center
SpinnerU5-1520

Call

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, controller manufacturer: SIEMENS, controller model: 840D, rotational speed (max.): 12,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Year: 2018, CE compliant CNC: SIEMENS 840D with SHOP MILL 4+1 axes Fgedsy Azcljpfx Ab Nsd ONLY 18,300 power-on hours Worktable dimensions: 2-piece table - fixed 920x540 mm / rotary-tilting 650x500 mm (with extension ring) Longitudinal X-axis travel: 1520 mm Transversal Y-axis travel: 520 mm Vertical Z-axis travel: 420 mm Spindle taper type: ISO 40 Spindle speed: 12,000 rpm Automatic tool changer: 32 positions Spindle motor power: 15 kW Approximate net weight: 10,000 kg Accessories: Internal coolant Chip conveyor Full upper enclosure Pneumatic door opening BLUM tool presetting and workpiece probe capability

See details

Listing

Schaafheim

1,248 km

CNC lathe
Mazakintegrex 200 SY

Call

Condition: used, Year of construction: 2000, Year of manufacture: 2000 Control: Mazatrol 640 Documents included Chip conveyor TECHNICAL DATA – MAZAK INTEGREX 200SY Performance / Capacity Max. swing: Ø 540 mm Fjdpfx Aeyh E Irjb Njgd Chuck size: 8" Max. machining diameter: Ø 540 mm Max. machining length: 1018 mm Max. outside diameter for bar material: Ø 51 mm Main spindle Spindle nose: JIS A2-6" Spindle bore diameter: Ø 61 mm Spindle speed: 35 – 5000 rpm (Standard) / 35 – 4500 rpm (Option: 5000)* Motor power (30 min. rating): 22 kW (18.5 kW*) Max. torque: 350 Nm (35.7 kgf·m) Sub spindle (counter spindle) Spindle nose: JIS A2-6" Spindle bore diameter: Ø 44 mm Spindle speed: 35 – 5000 rpm Motor power (10 min. rating): 7.5 kW Max. torque: 57 Nm (5.8 kgf·m) Turret / Tool data Turret type: With ATC, spindle turret External turning tool size: □ 25 mm Internal turning tool size: Ø 40 mm Milling tool: Max. Ø120 × 250 mm length Indexing time (90°): 0.5 s Milling spindle speed: 15 – 6000 rpm (Option: 10000) Milling spindle motor power: 7.5 kW Max. milling spindle torque: 62.29 Nm (6.35 kgf·m) Feed axes X-axis: Travel 530 mm / Rapid traverse 30,000 mm/min Z-axis: Travel 1065 mm / Rapid traverse 33,000 mm/min Y-axis: Travel 140 mm / Rapid traverse 15,000 mm/min Z2-axis: Travel 1005 mm / Rapid traverse 20,000 mm/min Media / Control Coolant tank volume: 250 L Power consumption (continuous): 32.7 kVA Machine dimensions / Weight Overall length: 3485 mm Overall width: 2105 mm Overall height: 2416 mm Weight: 73,575 N (7,500 kgf)

See details

Listing

Metso HP200 Cone Crusher stationary Metso HP200

Trachy

1,862 km

Metso HP200 Cone Crusher stationary
MetsoHP200

€144,000

Fixed price plus VAT

Call

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 14,300 h, Metso Nordberg HP200 – Cone Crusher for Sale Operating hours: 14,300 Condition: Fully operational, currently in use, regularly serviced Machine Description We offer a Metso Nordberg HP200 cone crusher – one of the most proven and efficient machines in its class. The crusher is still in daily operation, maintained according to manufacturer recommendations and kept in very good technical condition. Ideal for producing high-quality aggregates in both stationary and mobile installations. Fgodpfx Aoxyi Riob Ned Key Features - High crushing efficiency and consistent product quality - Excellent performance on hard and medium-hard materials - Hydraulic closed side setting (CSS) adjustment - Stable operation and low wear costs - Reliable, robust design commonly used in European quarries Technical Specifications (HP200) - Head diameter: 940 mm - CSS range: 6–38 mm (depending on configuration) - Maximum feed size: 185 mm - Motor power: 132 kW - Capacity: up to approx. 250 t/h (depending on application and settings) - Crusher weight: approx. 12,000 kg Details of the Offered Unit - 14,300 operating hours - Fully operational, in continuous use - Regular maintenance and service records available - Inspection of the machine in operation is possible

See details

Advertise here