Motor coach

MAN RH 463 TOP COACH 13,7 REISEBUS BJ 2001

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Rcodoin Ub Tspfx Akijh Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  - Line capacity: - 12,000 bph at 0.5 L - 9,000 bph at 1.0 L - 8,000 bph at 1.5 L - 6,000 bph at 2.0 L - Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L - Neck finish: PCO 1881 - Max. bottle diameter: 106 mm - Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water - Labelling: Wrap-around, pre-cut paper labels, hot-melt - Secondary packaging: Film only (4×3 and 3×2) - PLC: Siemens S7-300 - Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery - Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit - Rinser | Krones | Variojet | 2002 | Rotary - Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer - Labeller | Krones | SV 360-10-113 | 2002 | Rotary - Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt - Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats - Palletizer | Krones | Pressant Compact 1N | 2002 - Stretch wrapper | Robopac | Rotoplat | 2002 - Air conveyor | Krones | Airco S | 2002 | For blown PET bottles - Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles - Pack conveyor | Krones | Multico S | 2002 | For product packs - Pallet conveyor | Krones | — | 2002 | For pallet transport - Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Included in the price - Dismantling - Loading onto trucks - Export documents Rcsdoxhf Hijpfx Akijh

Condition: used, Valves, gate-valves, butterfly-valves, ball-valves, security-valves Rcsdpjtunb Aofx Akioh

Condition: new, Year of construction: 2025, Fully automatic liquid filling machine with 4 filling heads for filling volumes of different alternative ranges e.g. 50-500ml – customized configurations are possible. The volume is adjustable within the filling range by adaptation of the capacity of the air cylinder – uncomplicated controlled by software, without using additional modules. Operating principle: feeding of the bottles via infeed conveyor, positioning of the bottles, feeding of the filling needles into the bottles, filling by filling lances, exact dosing controlled by air cylinders. Electronic components: PLC and Touchscreen by SIEMENS, optical sensors by Sick. Pneumatic parts predominantly by AIRTAC. CIP (cleaning in place system) is customizable via software and hardware. - Specifications: Number of filling heads: 4; max. speed of the machine in neutral: 26 cycles/minute; accuracy: depending on chosen filling range and real filling volume; stainless steel version SS304 – all parts in contact with the filling material are made of SS316; power: 220V, 0.5kW; compressed air: 4-6bar, 0,4m³; machine dimensions LxBxH: 2500x1070x1800mm; weight: 850kg. - Mounting of servo motors instead air cylinders for dosing possible at a surcharge. Machine dimensions of servo version LxWxH: 2500x1300x1900mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Rcedjv Nk Rmopfx Akieh

Condition: new, functionality: fully functional, Year of construction: 2026, oil tank capacity: 90 l, overall weight: 1,800 kg, total length: 1,900 mm, total width: 1,350 mm, total height: 1,850 mm, power: 4 kW (5.44 HP), input voltage: 400 V, pressing force: 40 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, CNC PRESS BRAKE 40 t × 1320 mm – NEW, 2026 – IN STOCK 2-axis (Y + X) hydraulic press brake with touchscreen CNC control Compact, accurate hydraulic CNC press brake with 400 kN (40 t) pressing force and a 1320 mm working table. Built for sheet-metal workshops that need repeatable bends, a fast set-up and a small footprint. The machine has passed the manufacturer's final inspection (report dated 9 October 2026, result OK). KEY FEATURES • MTP-3212 touchscreen CNC controller with 2 controlled axes: Y (ram / bending depth) and X (motorised back gauge) • Back gauge with 500 mm travel, 0.1 mm positioning accuracy, driven by a ball screw (Taiwan SHAC) • Repeat positioning accuracy of the ram: 0.1 mm • Rexroth hydraulic system, American hydraulic pump and Parker seals • Siemens main motor, Schneider electrical components • Quick-clamp system for the upper tools, standard punch • Foot pedal with emergency stop SAFETY (CE) Rcjdpfx Akoyr N E Esioh • Light curtain protection at the front • Full-size rear door with power-off when opened • Large protective guards on both sides • Emergency stop on the control panel and on the foot switch • Electrical cabinet wired to CE standard TECHNICAL DATA • Nominal force: 400 kN (40 t) • Working table length: 1320 mm • Distance between uprights: 950 mm • Throat depth: 200 mm • Ram stroke: 90 mm • Open height: 300 mm • Controlled axes: 2 (Y, X) • Back gauge stroke: 500 mm, accuracy 0.1 mm, max. speed 100 mm/s • Ram speed: rapid 60 mm/s, working 15 mm/s, return 60 mm/s • Main motor: 4 kW • Voltage: 400 V, 3 phase, 50 Hz • Dimensions (L × W × H): approx. 1900 × 1350 × 1850 mm • Weight: 1800 kg (per nameplate) • Year of manufacture: 2026, new machine TERMS Available immediately from stock in our warehouse in Sokołów Podlaski. Price 8 900 EUR net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and operating manual included. Transport to any European destination – delivery quote on request.

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8394, Offer Number: D12L/8394 Machinetype: wire nail press Make: WAFIOS Type: S75 Rcsdpfew Nhwuex Akieh Constr. year: 1970 wire diameter: 1,8-3,1 mm nail length: 10-75 mm output - pieces/min: 420 Location: In our warehouse

Condition: used, Year of construction: 2023, operating hours: 480 h, ---- Dozer blade Rubber tracks Hydraulically adjustable undercarriage Rcjdozqybmspfx Akijh Radio Includes bucket package Includes Powertilt MS01 with lifting hook! Location: Dresden

Condition: used, Year of construction: 1999, Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  - Capacity: - 27,000 b/h at 1.0l PET Rcodpswiizpjfx Akish - 25,000 b/h at 1.5l PET - 22,500 b/h at 2.0l PET - Formats: 1.0l, 1.5l, 2.0l PET bottles - Closure: PCO 1881, plastic screw caps - Filling system: Isobaric - Number of filling valves: 126 - Capper: Screw capper 720-18-126 (Alcoa) - Running direction: Right-Left (anti-clockwise) - Neckhandling with Pick&Place-System - Product: Carbonated soft drinks (8 g/l CO₂, 20°C) - Machine pitch: 144 - Machine safety: Full guarding – lifting version - Control Unit: Siemens S7 - Accessories: Krones Checkmat Scope of Delivery - Krones Sensometic VP-I-PET filler - Screw capper by Alcoa (720-18-126) - Krones Checkmat - Pick&Place neckhandling system - Integrated foaming system - Neumo butterfly valves

Condition: new, functionality: fully functional, Year of construction: 2026, power: 136 kW (184.91 HP), motor manufacturer: Mercedes, gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 9 l/h, maximum speed: 25 km/h, color: green, overall weight: 6,000 kg, front tire size: 32, rear tire size: 12.5, total height: 3,000 mm, total length: 8,000 mm, total width: 3,200 mm, working width: 4,000 mm, machine/vehicle number: 1, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, Custom-made chamomile harvesting attachments for Claas combine harvesters. Available for Claas Dominator, Mega, and Medion models. Each unit is manufactured to order and can be adapted to the customer’s combine model and specific requirements. Rcsdpfsz E Aylex Akish Header width is optional. The recommended working width is 4 meters. The price depends on the customer’s requirements and specifications. The complete combine harvester shown in the photos is priced at 150,000 EUR. Custom-built to order Suitable for chamomile harvesting Adaptable to different Claas models Robust and reliable construction Dimensions and mounting system made according to agreement For more information, price details, and production specifications, please contact me via message or phone. More photos and videos of the machine in operation are available upon request.

Condition: used, Year of construction: 1990, operating hours: 2,946 h, power: 115 kW (156.36 HP), Equipment: air conditioning, cabin, INTERNAL VEHICLE NUMBER: M662 ----CLAAS DOMINATOR 88 SL ----HOURS: 2,946 ----YEAR OF MANUFACTURE: 1990 ENGINE: PERKINS 6-CYLINDER WITH TURBO (4-STROKE DIRECT INJECTION) WATER-COOLED MAXIMUM SPEED: APPROX. 25 KM/H CUTTING UNIT: 3.90 METERS RAPS TABLE THRESHING DRUM WIDTH: 1300 MM THRESHING DRUM DIAMETER: 450 MM STEPLESSLY ADJUSTABLE FAN FOR CLEANING FUEL TANK PIPE: HYDRAULICALLY SWIVELING TIRES NEW NUMBER OF SHAKERS: 5 SHAKERS HYDRAULIC DRIVE GRAIN TANK CAPACITY: 4600 L STRAW SPREADER TRANSPORT LENGTH: 10 METERS TRANSPORT HEIGHT: 3.85 METERS Rcedsz Sdvwepfx Akish UNLADEN WEIGHT: APPROX. 8500 KG HEATING AIR CONDITIONING (COMPRESSOR MISSING) 3D LEVELING SYSTEM HYDROSTATIC TRANSMISSION WITHOUT CUTTING UNIT WAGON THE HEADER DRIVE HAS BEEN COMPLETELY OVERHAULED NEW BASKET NEW BELT NEW BLADE Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing solutions tailored to your needs: with or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will support you from the initial consultation to vehicle handover. 4. Our additional services: In addition to vehicle purchase, we offer exclusive services for a smooth process: Worldwide vehicle sales: Support with purchase and export, wherever you are. Transfer registration plates: Provision of export or short-term registration plates for transport. Customs clearance: We take care of all formalities for export abroad. Delivery of your vehicle: Safe and timely delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, net sales for export are generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp: Staff on-site during opening hours. Please call in advance to make a reservation. We look forward to your call Your team from Autohaus MAT in Waibstadt