Crane truck

PLATEAU-WECHSELPRITSCHE MIT LOGLIFT 140S INKL. ROTATOR UND GREIFER

Condition: good (used), Well-maintained horizontal creel. Passage 1000 mm. Stroke 800 mm. Podpfx Aaounhl Uo Eorf Feed electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamping jacks. Can still be inspected in operation.

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger Podogwqk Sepfx Aa Esrf One single blade horisontal resaw Conveyors system between the machines included.

Condition: good (used), Offered is a used double toggle jaw crusher from Krupp. Good condition, fully operational. 500 x 300 mm, 15 kW, new tools. The motor is currently being overhauled. Prodpfx Aswy U Icea Esf

Condition: excellent (used), Used CHP Plant Manufacturer: Indop Year of manufacture: 2014 Fuel type: natural gas Electrical output: 50 kW Thermal output: 80 kW Operating hours: 28,901 h Engine type: MAN GAS ENGINE e0834 e32 (54 kW) Number of cylinders: 4 Pedpfx Ajwthzija Eorf Available: 3 units Indop 50 kW at €13,400 each 2 units Indop 20 kW at €8,600 each 1 unit Energ-g 50 kW at €13,400 Test run possible.

Condition: ready for operation (used), Four-side planer constant table Max. planing width: 605 mm Planing height (2-sided): 200 mm Planing height (4-sided): 170 mm Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives are in operation and 3 sharp knives are in reserve position Additional unit: 5th working shaft, horizontal, 11 kW Outfeed unit, roller width 350 mm Option: Pre-planing at the machine infeed Prsdpfx Aaswg S Tvo Esf !! This planer is still operational at the owner’s site until February 2026 !!

Condition: good (used), Year of construction: 2008, machine/vehicle number: 6424102096, Offer No. 25101 Technical Data: Pjdpjwpincjfx Aa Eorf - Cutting range at 90° round 400 mm - flat W 400 x H 400 mm - Cutting range at 45° flat W 320 x H 320 mm - Cutting range at 60° flat W 210 x H 320 mm - Material support height approx. 700 mm - Saw band dimensions 5090 x 34 x 1.1 mm - Cutting speed steplessly adjustable 17 - 90 m/min - Hydraulic lifting – lowering of the saw frame - Cutting pressure steplessly adjustable 0 - 10 m/min - Total drive power 400 V / 3.5 kW - Coolant system - Infeed – roller conveyor 7000 mm - Outfeed – roller conveyor with stop + digital display 4000 mm - Space requirement approx. W 2000 x H 1400 x D 2800 mm - Weight approx. 1200 kg

Year of construction: 1987, condition: used, Gantry slewing single level-luffing jib crane Prjdpfxedlazge Aa Eof constructed for 4-rope grab operation as well as hook operation Capacity grab operation approx. 8,0 to at an outreach of approx. 12,0 up to 25,0 m Capacity in hook operation max. approx. 12,5 t Lifting height above rails with jib approx. 25,0 m max. approx. 22,9 m Span original/actually approx. 6,0/5,2 m Make TAKRAF/TEICHMANN Year of construction/complete overhaul - modernisation 1987/2005 Total weight only approx. 90,0 t Crane equipped with under ridable full-portal, intermediate column to increase the boom pivot point, complete enhousing of the top crane, modernisation with completely new electrics (FU control), cabin, control chair, motor-cabledrum and new painting in 2005 Working speeds: Main hoisting gear actually/optimized approx. 52,0/65,0 m/min Retracting gear approx. 35,0 s Slewing gear approx. 1,2/2,4 rpm Crane travel gear max. approx. 50,0 m/min

Year of construction: 1999, condition: excellent (used), 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Prjdpfx Aaextwwks Eef Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: used, Inlet: 1,000 x 350 mm, max. feed size: 320 x 320 mm, 45 kW electric motor, crusher weight: approx. 13.3 t, including steel base frame Prsdswb Dfgopfx Aa Eof

Year of construction: 2007, condition: good (used), Special price until 28.02.2021! Capacity approx. 45.000 kg Span approx. 29.000 mm Hook path approx. 14.000 mm Make TEICHMANN Reconstruction 2007 Hoisting class H3 Stress group B4 Mechansim group FEM/ISO 3m/M6 Crane equipped wiht: - high quality whinch trolley - cabin and radio control - one sided walkway Prodpfx Aajghrcfs Esf - accesssible trolley - rope drum without hook movement - load weighing