Liquid gas semi-trailer / LPG trailer

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Nlodpfoz D Taaex Ac Asg TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Nsdpetu U Ebjfx Ac Aolg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Njdpfxsz A D Irs Ac Ajlg Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Multi-chamber extraction system Compact dust collection system

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, empty load weight: 550 kg, total length: 3,210 mm, total width: 1,162 mm, total height: 2,050 mm, discharge height: 1,080 mm, machine/vehicle number: 2211410, TECHNICAL DETAILS Capacity, light vegetables: max. 400 kg/h Capacity, heavy vegetables: max. 800 kg/h Nodoz Ahnrjpfx Ac Aelg MACHINE DETAILS Voltage: 3~ 400 V Frequency: 50 Hz Connected load: 7 kW Fuse rating: 25 A Water content: 500 l Protection class: IPX4 Dimensions & Weight Dimensions (L x W x H): 3,120 x 1,162 x 2,050 mm Machine weight: 550 kg Loading height: 1,140 mm Unloading height: 1,080 mm EQUIPMENT Barbotage system Frequency-controlled pumps Inverter control Stainless steel design Conveyor belt with product discharge Rinsing via spray device Height-adjustable feet Spiral water guide Extended and raised product discharge zone, special design Extension of the product discharge zone: 200 mm Documentation

Condition: excellent (used), tank capacity: 600 l, We can offer you an argon, nitrogen, oxygen, carbon dioxide and nitrous oxide tank: O2,N2,CO2,N2O pallet tank Manufacture: AGA CRYO Volume: 600 litres; Working pressure: 17,5 bar We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail. Nlodpfxjvdb A Ne Ac Ajg

Condition: used, machine/vehicle number: BXMS230118020, No minimum price – guaranteed sale to the highest bidder! The new price was €4,950! TECHNICAL DETAILS Relief for the lower back: up to 25 kg Support force: continuously adjustable MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 600 x 600 x 600 mm Weight: 5 kg FEATURES Purely mechanical control at hip height Automatic deactivation of support during walking Force absorption during bending and force release during lifting Nlodpfx Aszz H D Asc Aeg Load transfer from the shoulders to the thighs via a support structure Energy storage Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 2000

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Nodozz H Dpopfx Ac Aolg Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Nledpfxoi Enxde Ac Aeg Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg In addition, we can equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detectors - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request - External tank insulation with PU foam The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: used, Year of construction: 2020, overall weight: 540 kg, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Fork adjustment: 4-way Fork length: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,500 x 1,600 mm Self-weight: 540 kg EQUIPMENT 4-way fork adjuster Fork carriage Fork tines with 1,200 mm length All dimensions are approximate. No guarantee is given for typographical or measurement errors. Njdszz H Dispfx Ac Ajlg Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1152

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity forklift: 2,500–5,000 kg Fork length: 1,350–2,000 mm Mounting: FEM 3A MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 800 x 1,000 mm Net weight: 250 kg EQUIPMENT Nlsdpfxozz H A Ee Ac Aog Hydraulic telescopic forks For loading onto a pallet for truck loading All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 1103

Condition: excellent (used), Year of construction: 1991, Сryogenic gas tank used for oxygen, nitrogen, argon, and carbon dioxide (CO2). Manufacturer: Harsco (Germany) Nledpfxjyuu Sco Ac Aeg Year of production: 1991 Vacuum isolation: with certificate. We also have a variety of other tanks available for different industrial gases. Please contact us with your specific requirements, and we would be happy to assist you.

Condition: used, Year of construction: 2022, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS FEM class: FEM 3 Load capacity forklift: 3,000–5,000 kg Fork length: 1,350–2,350 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 1,000 x 1,000 mm Self-weight: 200 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Nlodpfx Acjzz H Afe Aog In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1081

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Nodpszz Hzzsfx Ac Ajlg FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Internal opening width: 70–940 mm Rotation range: 360° Fork length: 2,400 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,350 x 1,000 mm Self-weight: 1,000 kg Originating machine: Linde E50HL EQUIPMENT 3rd, 4th, and 5th valve Rotating clamp with 360° rotation function Fork positioner Side shifter Fork, 2,400 mm long All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1013

Condition: new, Year of construction: 2025, Power at 50%: 35kVA Short circuit-current: 19kA Electrode force: 300daN / single stroke Throat depth: 395mm --- Weld control: WS 708 (7-times, 8-program) --- Extra Equipment: - foot pedal - main switch --- Warranty: 6 months --- Nodpekti Hzsfx Ac Ajlg Spotwelding electrodes + spare parts at stock

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Nledpfxjzz Hzuo Ac Ajg Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV (Occupational Safety and Health) certificate valid until: 07/2027 Operating hours: 788 h All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 446