Semitrailer

KWB P-382-STI Betonmischer Motor SAF-Achsen Lift

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm Ijdpfou I E Emjx Aa Ejik z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: used, STC Film Wrapping machine, Machine used for packing champignon. Iisdpfx Ajc Nlxroa Ejk Capacity 40-80 pack/min.

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, table length: 8,000 mm, table width: 2,500 mm, table load: 15,000 kg, Chain ATC Tool changer 80 positions Rotary table 1500 x 1500 with V-Axis 1500 mm Table load 15.000 Kg Optional Box table 3500 x 1000 x 1000 mm Under power X-Axis: 8000mm Y-Axis: 3100mm Z-Axis: 1600mm Table Length: 8000mm Table Width: 2500mm Table load: 15000 Power on spindle: 43kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Control: iTNC530 Millinghead auto-index:2.5 x 2.5° Iiedsxm Sudopfx Aa Ejk Length: 14000mm Width: 6000mm Height: 6000mm Weight: 68000kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 302827, Federhenn rod-profile machining center (drilling and milling) SBZ 100G - TO BE SOLD IN LINE WITH 1 SCHIRMER NC-SAW 1000-G4 YEAR 2014 (COMPLETE LINE) SEE SCHIRMER ADVERTISMENT....!! Iiodpfx Aaownpa Ne Eok NC feeder device with gripper max 200 m/min - max profiles 3500 mm.. The gripper can be adjusted pneumatically in 2 axes for adaptation to different profile geometries. Machining station designed as a G-module with 2 servo axes in Y and Z direction. Prepared for accommodating up to 14 processing units for complete processing of PVC, frame, post and frame profiles - outfeeder with table 2500x1500 mm.. PC-control C 6140, display, software SBZ 100G, PLC+NC. Modem remote diagnosis. Loading magazine with 9 places (9 profiles 3500 mm) designed for frame profiles max 127 mm width. Barcode scanner - Horizontal belt conveyor with 9 transport beams that can be adjusted continuously. 18 m/min - 3000 x 2400 mm - units: screw unit, 2 x drilling unit for dowel or post holes, 2 x drilling unit for fixing holes 16,750 rpm, 2 x additional processing (marking the closing part), drilling unit for front door fittings (opens inwards), drilling unit for olive hole drilling (3 sp), milling unit lock case. 2 pcs milling unit for milling and drilling drain slots and ventilation holes. 1 ditto obliquely arranged. 1 swivel device (MD and AD window systems. Milling unit for milling PZ and handle hole pattern

Condition: used, mileage: 205,880 km, power: 265 kW (360.30 HP), first registration: 05/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 8x4, gearing type: mechanical, emission class: euro4, Year of construction: 2008, LEAF LEAF SUSPENSION Manual transmission 8x4 Technically in order Iodpfxok Sfv No Aa Esik

Condition: good (used), Year of construction: 2009, Manufacturer: BAILEIGH Type: R-H 120 Control: Telemechanique Year of manufacture: 2009 Arm adjustable 330 mm Hydraulic side support Set of universal rolls Set of pipe rolls 88.9 mm Set of pipe rolls 60.3 mm Digital readout system position side rolls Horizontal & vertical operation possible Specifications Metric US Standard Horizontal and Vertical Horizontal & Vertical Axis Ø 100 mm Number of rolls 3 Horizontal Yes Vertical Yes Flat capacity 100 x 240 x 1600 mm Pipe capacity 139 x 4 x 3000 Ø x mm T-profile capacity 100 x 100 x 1000 mm Working speed 0 - 5500 mm/min. Adjustable side roller range 200 Upper roller pressing force 200 Bar Iedpfx Aowpkwfoa Esik Side support yes, 330 mm stroke Dimensions (approximate) Length 1800 mm Width 1600 mm Height 2000 mm Weight 2300 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details. Share on

Condition: used, Year of construction: 1992, Jumbo slotter Iiodpfx Aasp E T N He Ejk Vacuum Feeder N° 2 colors Automatic Slotter Rotary die cutter Stacker Unit Visible at works

Condition: used, functionality: fully functional, Year of construction: 2013, Sahinler HPK 200 Hydaulic section and pipe bending machine Mil and Shaft Diameter: 200mm Tool and Roll Diameter: 900mm Working Speed: 2-5 m/min Motor Power: 30 kW Bending capacity x15x4 273x5.6 / 10000 mm Iedpjw D Uqxjfx Aa Eoik Diameter biggest roll 9"x6,3 / 4000 mm Diameter top roll 650 mm Diameter upper roll 650 mm Roll capacity section - 3 200x200x18 / 5000 Shaft diameter 200 mm Top roll x15 with prebending min.120x120 / 3000 mm Voltage 3x400 V Working speed 2-5 m/min Power Power max. 30000 W Height 2300 mm Length 2400 mm Width 3400 mm Weight15000 kg

Condition: used, Year of construction: 2018, Liebherr R 924 SLC Litronic Year of manufacture: 2018 Operating hours: 5,400 Liebherr engine – Tier 4 – EPA Adjustable boom 4.00 m Stick 2.70 m Counterweight 4.8 t SLC undercarriage, track width 2,250 mm B60 tracks, 750 mm triple grouser pads, 50 links Automatic air conditioning Central lubrication system (automatic) Premium driver's seat Comfort radio Raised hand supports for joysticks Footrest Sun visor Impact-resistant roof window Roof window wiper Cab work lights, front, LED 2,100 lumens, 2 units Cab work lights, rear, LED 2,100 lumens, 2 units Bypass filter, Liebherr Isdpfjw Rcrvsx Aa Ejik Fuel tank filling pump Reversing camera Camera for monitoring right side view Return line filter for hydraulic breaker Additional handrail for accessing the right upper side of the uppercarriage Access Travel alarm system button on right joystick (switchable) Proportional control, medium-pressure circuit (left) / high-pressure circuit (right) Control switch for operating high-pressure circuit via proportional control or joystick (switchable) High-pressure circuit switchable via pedal or mini-joystick High-pressure circuit with tool control Overload warning system Two-piece boom 4.00 m Stick 2.70 m Load-holding valve for lifting cylinder Load-holding valves for boom cylinders Load-holding valves for stick cylinder Adjustable rod guard for boom cylinder Work light on boom, right, LED 2,100 lumens, 1 unit Additional work light on boom, left, LED 2,100 lumens, 1 unit Work light guards on boom, right and left Central lubrication system extended for connecting link Stick protection Hydraulic quick coupler SWA 48 HD with Likufix

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,300 mm, travel distance Z-axis: 1,500 mm, Manufacturer: SORALUCE Type: FS 8000 Control: HeidenHain iTNC 530 Year of manufacture: 2006 ATC Chain 40 positions Max. tool size Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Stroke with vertical head rotated 3300 mm Specifications Metric US Standard X-Axis 8000 mm Y-Axis 2800 mm Iiodexc Emxopfx Aa Eek Z-Axis 1500 mm Spindle power 30 kW Spindle speed 5000 Rpm Tool holder 50 ISO/Bt/Mk X - Axis feed 15000 mm/min. Y - Axis feed 15000 mm/min. Z - Axis feed 15000 mm/min. Milling head auto-index 2.5 x 2.5 ° Dimensions (approximate) Length 17500 mm Width 4050 mm Height 5020 mm Weight 38400 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you check all important details.