Open trailer with tarp

K+G Tec/Pritsche+Schiebeplane+Edscha+LBW/Tankdem

Condition: used, maximum load weight: 13,440 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2013, loading space length: 7,350 mm, loading space width: 2,440 mm, loading space height: 2,440 mm, Equipment: ABS, tail-lift, Manufacturer: K+G Tec GmbH Type: ZPA18 Safe server tarpaulin with Edscha roof and tail lift, 2,000 kg, air suspension with a lift axle, Mercedes axles, disc brakes, ABS. Iedpfx Asv Ndnrjaleap Internal dimensions: Length: 7.35 meters Width: 2.44 meters Height: 2.44 meters Payload: 13,440 kg

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Iodpfsl Hx Adjx Aalsap

Condition: used, Bottle washer, make Krones, type: KES 1-5-190/14-110 R, single-end machine in stainless steel, for 13.200 bph, 14 Iaedorxuv Ajpfx Aalsp bottles/row, with 110mm cell pitch, with pre rinsing, presoak bath, caustic soaking and caustic spraying, 4 water spraying (2x warm + 1x cold + 1x fresh water), with headboard disinfection, S7 control, built 1996. L: ~12.500 mm, W: 4.645 mm, H: 3.500 mm, weight: 33.000 kg

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Iaodpfxoxqmrfj Aalsp Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Year of construction: 1998, condition: ready for operation (used), A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible. Ijdpfoyhgniex Aalsap

Year of construction: 2007, condition: ready for operation (used), A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026. Iaodpfx Aajxfbczelsp

Condition: good (used), functionality: fully functional, Tank with agitator 1000L Iasdpjw Iv Uxjfx Aalsp Capacity: 1000 l Dimensions: 1200x1200x2200 mm

Condition: used, mileage: 500,819 km, power: 290 kW (394.29 HP), first registration: 08/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, loading space volume: 47 m³, loading space length: 8,200 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, tail-lift, * Sun visor * Driver airbag * ABS * ASR * ESP * Active Brake Assist * Lane departure warning system * Radio * On-board computer * Rear view camera * Reversing alarm * Cruise control * Hill start assist * Electric windows * Electric mirrors adjustable * Heated mirrors * Central locking * Roof hatch * Driver's comfort seat * Heated seats * Seat ventilation * Differential lock rear axle * Steering axle Iaodjum H N Aspfx Aaljp * Air intake at top * Tandem trailer coupling * Duomatic air connection * Fog lights * 12-speed * Suspension: air * Payload: 14340 * Permanent brake: engine brake ----Special structure: Tail lift: Bär BC 2000 S4, load capacity: 2,000 kg, shield height: 2,300 mm, aluminum, foot control.----Structure: Spier beverage structure type 7GK040, sliding tarpaulin left + right, hardwood floor, 4 perforated strips, beam system for securing loads, loading area lighting. Loading height approx. 1,200 mm Only sold to traders. FOR EXPORT ONLY THE NET PRICE HAS TO BE PAYED !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT AND ACCESSORIES. The basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions are our general terms and conditions (see legal notice).