Reefer semitrailer

Krone Cool Liner Duoplex Steel Standard

Condition: used, empty load weight: 8,440 kg, axle configuration: 3 axles, first registration: 03/2024, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2023, ref: F1109351 Equipment: * Power connection: 1 x 15-pole + 2 x 7-pole, Lrsdpfxsz Aut Ij Ac Aet * ABS, * EBS, * Cooling unit, * Ferry lashing, * Side impact protection, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Flower width, * Lashing rails: 1, * Air connection: Red/Yellow connector VIN: WKESD000001109351 Tire size: 385-65 R22.5 Internal length: 13.31m Width: 2.6m Internal width: 2.49m Height: 4m Internal height: 2.63m

Condition: used, Year of construction: 2024, Rear section Primera DMC 4200 l 1-fold conveyor section Single-shoot distributor heads / f. 16 rows Long loading board for rear section Drawbar with folding support foot / lower linkage attachment Cat. 3 braked axle with parking brake / dual-circuit air brake system Ledouhnwvepfx Ac Aort

Condition: used, empty load weight: 8,440 kg, axle configuration: 3 axles, first registration: 03/2024, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2023, ref: F1109350 Equipment: * Power connection: 1 x 15-pole + 2 x 7-pole, * ABS, * EBS, * Refrigeration unit, * Ferry lashing, * Side impact protection, * Rear door design: rear portal doors, * Locking bars on rear doors: 2, * Floor: aluminum floor, * Double-deck system, * Flower width, * Lashing rails: 1, * Air connection: red/yellow connector VIN: WKESD000001109350 Tire size: 385-65 R22.5 Internal length: 13.31m Width: 2.6m Internal width: 2.49m Height: 4m Lrodpfxjz Autze Ac Aet Internal height: 2.63m

Condition: used, empty load weight: 8,440 kg, axle configuration: 3 axles, first registration: 07/2024, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2023, ref: F1109348 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Refrigeration unit, * Ferry lashing points, Lrjdpfx Acez Autuj Ajt * Side impact protection, * Rear door configuration: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Flower width, * Lashing rails: 1 VIN: WKESD000001109348 Tire size: 385-65 R22.5 Internal length: 13.31m Width: 2.6m Internal width: 2.49m Height: 4m Internal height: 2.63m

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Lededqzcxjpfx Ac Ajrt Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -

Condition: used, empty load weight: 7,760 kg, axle configuration: 3 axles, first registration: 01/2024, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2024, ref: F1167107 Equipment: * Air connection: Red/Yellow head, * Power connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Pallet box: 32 pallets, * Tool box: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Lashing rails: 1, * Flower width VIN: WKESD000001167107 Tire dimension: 385-65 R22.5 Internal length: 13.31m Width: 2.6m Internal width: 2.49m Lodpfx Aezyvf Hjc Aort Height: 4m Internal height: 2.65m

Condition: used, empty load weight: 8,300 kg, axle configuration: 3 axles, first registration: 06/2026, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2025, ref: F1209171 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Device for rail loading, * Ferry lashing, * Side impact protection, * Wheel chocks: 2, * Access ladder, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Floor: Aluminum floor, * Double-decking system, * Lashing rails: 2 VIN: WKESD000001209171 Tire dimension: 385-65 R22.5 Internal length: 13.31m Lsdpfxjy Tblus Ac Asrt Width: 2.6m Internal width: 2.46m Height: 4m

Condition: used, Year of construction: 2017, working width 4 m Number of gangs . 0 Number of folders 2 0 Ljdpfx Aeyv Iu Uec Asrt Number of rollers 1 St.

Condition: used, empty load weight: 8,500 kg, axle configuration: 3 axles, first registration: 02/2019, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2019, mileage: 560,359 km, ref: F0855323 Ledpsy Tbkksfx Ac Asrt Equipment: * Air connection: Red/Yellow connector, * Power connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Refrigeration unit, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WKESD00000855323 Tire size: 385-65 R22.5 Internal length: 13.31m Width: 2.6m Internal width: 2.47m Height: 4.02m Internal height: 2.65m

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features Ljdet Hwt Sjpfx Ac Ajrt * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.