Three-way tipper trailer

Kempf HKD 18, Alu-Bordwände ca. 13m³

Year of construction: 2007, condition: excellent (used), Vacuum packaging machine VC999 07P, year of manufacture: 2007. Connection: 400V. Chamber dimensions approximately 88x50x15 cm, equipped with 2x CLFH 220 Rietschle vacuum pumps. Year of manufacture: 1998, power: 2x 5.5 kW. In very good condition, fully functional. Nlodpfx Acsf Srcfo Ajg

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Nledpfx Aszpcvdjc Asg Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: used, Year of construction: 2025, operating hours: 14 h, functionality: fully functional, Powerful ride-on sweeper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 13h Year of manufacture: 2025 SCHORR Ride-on Sweeper, Electric Sweeper, Street Sweeper, Floor Sweeper Powerful and smooth-running sweeper for indoor and outdoor use. With switchable spray nozzle. The ride-on sweeper offers a comfortable and efficient solution for floor cleaning. The ergonomic seat and intuitive controls allow effortless operation, even over extended periods. The powerful motor ensures thorough cleaning even in challenging conditions. With a generous 80-liter collection container, large areas can be cleaned without frequent interruptions. This combination of comfort and efficiency makes floor cleaning a stress-free and enjoyable task. The standard LED work lights facilitate working in darker areas. With an output of 1920 watts from 48V, the sweeper is equipped with enough power to comfortably provide over 4 hours of continuous use. SCHORR Ride-On Sweeper RR80KM – Discover the advantages: -- Fully electric ride-on sweeper with a 1250mm working width – ideal for large indoor and outdoor areas -- 48V/1920W power -- 80-liter bagless rear-mounted collection container, easily extendable and emptied -- Powerful system with 48V and 58Ah -- With switchable spray nozzle for less dust stirring -- Extremely easy to operate -- Outstanding maneuverability Technical specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR80KM Drive: Seat Power: 1920W Nedpfewh Rd Nox Ac Aslg Operating time: approx. 4 hours Number of wheels: 4 Tires: PU (non-slip) Weight: 400kg Basic dimensions Collection container volume: 80L Fresh water tank volume: 10L Main brush diameter: 500mm Total length: 1600mm Total height: 1300mm Total width: 1250mm Sweeper width (without brush): approx. 80cm *Further technical specifications are available upon request. The chassis is made entirely of flexible and robust plastic, which reduces potential damage to walls, for example. Except for the side brushes, nothing protrudes beyond the casing, allowing you to work as close to objects as possible. The collection container is made of solid steel and can be easily removed from the rear of the machine. Sensitive components such as the headlights are protected by a metal bumper. Overall, the machine is perfectly equipped for most applications. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on sweeper. You can reach our competent team by phone or email. We look forward to hearing from you and providing advice.

Condition: used, Year of construction: 2021, operating hours: 1,120 h, power: 53 kW (72.06 HP), Equipment: all wheel drive, front linkage, * German-made machine, first owner, in very good condition * TABMC040VK5115005 * Full service history Nsdey Ubguopfx Ac Aslg * Road approval, 40 km/h * 4x4 all-wheel drive * Year of manufacture: 2021 * Operating weight: 6,200 kg * Tires: 340/85 R24 (front), 420/85 R34 (rear), approximately 80% tread * * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: [Phone number] * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: used, Year of construction: 2010, operating hours: 504 h, power: 10 kW (13.60 HP), Operating hours: 504 Kubota B 1620 mini tractor Year of manufacture: 2010 First registration: 2020 Operating hours: 504 Engine: 719 cc, 10 kW Transmission: 6 forward / 2 reverse gears, 19 km/h PTO 540/1000, rear linkage, 2 double-acting valves possible Cabin with rotating beacon Front loader with bucket Sale according to § 25a UStG, taxed on the difference, Storage location: null Nodpszfu Absfx Ac Aslg

Condition: new, maximum load weight: 38,953 kg, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Total weight: 49,500 kg Saddle load: 18,000 kg Axle load: 31,500 kg Unladen weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck length: 3850 mm Saddle height loaded: 1200 mm Loading platform length: 9300 mm Extendable by: 0 mm Axle distance: 1360 mm Rear deflection radius: 2300 mm Loading height at max. load: 860 mm Overall width: 2540 mm Suspension travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with beveled front corners at 45° and a rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, 30 mm thick. Loading platform: Loading platform after the gooseneck, hydraulically raisable and lowerable, length approx. 2,800 mm, with a rear bevel of approx. 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the central beam at the front (LC 10,000 daN). Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Hardwood flooring approx. 48 mm thick, with non-slip steel plate flooring over the axles. Ramps: Two-piece steel ramps, one pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood flooring. Ramp with hydraulically raising and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for a 24t lifting capacity (50t test load). Tires: Tires 235/75 R 17.5, as selected by the manufacturer. Axle: SAF axles, air-suspended, with drum brakes, with raising/lowering function. The last axle is steered with an electro-magnetic reverse steering lock, which can be activated via reverse gear or manually. Axle tool. Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Steel structure: Steel structure made of high-strength fine-grained steels. Steel qualities: S355J2+N / S355MC (yield strength 355 MPa) S690QL / S700MC (yield strength 690 MPa) Painting: First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat in a single color in RAL colors of your choice. Rear part metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Electrical system: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) Nsdpfjg Sk Trsx Ac Aslg ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pin sockets. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories 2" kingpin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connection bar at the front. 4 pieces of wheel chocks with holders on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or the electric winch (35mm², 3.5 m long, max. 250A) between the semi-trailer and the tractor unit with plug connection (ANDERSON-ANDERSON) Galvanized folding supports under the bevel of the loading platform. One bracket for a rotating beacon on the rear of the semi-trailer. Operating valves for the ramps mounted on the right side of the semi-trailer. (± 4 kg) Yellow reflector tape according to EU regulations on the side and r

Condition: good (used), Multivac C500 Double Chamber vacuummachine This one with vacuum and gas flushing system. Double chamber machines from MULTIVAC are easy to operate, clean and service. They offer the highest output on the smallest footprint and also provide impressive performance over their entire machine life thanks to their production output and pack quality. The evacuation and gas flushing processes are pressure-controlled and thus guarantee reproducible packing results. MC 06 machine control with precise vacuum measurement in the chamber. Nsdszp Eh Nopfx Ac Aelg Brand: Multivac Model: C500 Power: 400V / 50Hz / 3Phase / 7kW Vacuum Pump: Busch 160m3/h Seal bar length: 660 mm (x4) Chamber Dimensions: 740×660 mm (x2) Machine dimensions (LxWxH): 1.600x950x1.060 mm Machine weight: 650 kg.

Condition: used, power: 99 kW (134.60 HP), Year of construction: 2015, operating hours: 1,800 h, Equipment: ABS, air conditioning, all wheel drive, cabin, VAT can be shown: Net selling price: €69,500 Well-maintained Fendt 313 Vario / SCR with original 1,800 operating hours Very good condition 1,800 hours 1st owner 19% VAT can be shown If you have any questions: Christian Hirsch Please try again later, as we are often in a customer meeting. * Vario operation * Multifunction joystick with cruise control, engine speed memory, automatic functions, hydraulic control * Varioterminal 7-A with button operation * Variotronic headland management system * Vario TMS tractor management system * Cabin * Air conditioning * Continuous front windshield * Height and tilt adjustable steering column Nsdpfx Acoy I Hz Rj Aslg * Super comfort seat, air-suspended with backrest * Super comfort seat with seat heating * Co-driver's seat with automatic seatbelt * Particulate filter (aerosol) * Segment wiper on the front windshield * Interior mirror * Work lights * Engine & Transmission * Reversing function, stop-and-go function * All-wheel drive / differential locks * Comfort control for all-wheel drive / differential lock * Rear / front differential with 100% lamellar lock and steering angle sensor * Load-sensitive PTO shafts * Rear: Flange PTO shaft 540/540E/1,000 rpm * External control for rear PTO shaft * Hydraulic system * Electro-hydraulic rear lift (EHR) * 1st and 2nd hydraulic valve in the rear * Hydraulic valve controls cross lever, UDK couplings rear * Front axle weight 60 kg * DL hydraulic system / 2-line system * Towing hitch, height adjustable * Roof white * Paintwork of body in RAL color * Paintwork of rims according to customer's choice * Heated rear window * Ventilation * Air conditioning * Super comfort seat, air-suspended * Floor mat, cabin * Steering wheel incl. rotary knob * Additional equipment bracket * Terminal bracket * Mirror bracket * Rearview mirror * Cabin suspension, mechanical * Work lights, roof front, TWINPOWER * Work lights, fender * Work lights, roof rear, TWINPOWER * VARIO TMS C267 * Rotating beacon * Color of body RAL 1032 * Color of rims RAL 9006 white aluminum * 40 km/h version * PTO speed 540/540E/1,000 rpm * Double-acting valve, center, right + rear * Additional valve, double-acting, rear * Additional valve, double-acting, rear * Return line, center right * Top link, category 2 (not available) * Fuel pre-filter, heated * Tires: 360/80 R24 138D NO 30 8 W12X24 * Tires: 440/80 R34 155D NO 112 8 DW15L * Tread depth ~ 90% * 1820 mm track width front * 1800 mm track width rear If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later, as we are often in a customer meeting. More offers can be found at: Equipment details were determined using a VIN query; errors may occur for technical reasons. Information provided on the internet is a non-binding description. It does not constitute a guarantee of properties. The seller is not liable for typing or data transmission errors / changes / input errors. Errors and prior sale are subject to change.

Condition: good (used), functionality: fully functional, power: 88 kW (119.65 HP), fuel type: diesel, lifting power: 3,000 kg/m, lifting height: 6,000 mm, Year of construction: 2014, operating hours: 6,801 h, Equipment: additional headlights, all wheel drive, cabin, differential lock, pallet forks, rear pickup, trailer coupling, Telescopic loader MERLO Multifarmer 30.6 Classic 2 Year of manufacture: 2014 According to the meter, 6,801 operating hours 3-ton lifting capacity 6-meter lifting height 40 km/h, 2-stage hydrostatic transmission 88 kW Deutz 4-cylinder engine - MULTIFARMER with lifting mechanism and PTO! - Top machine for agriculture! Njdpfx Acjy Uli He Aolg - All-wheel drive - 3 steering modes - Joystick - Differential lock - Leveling system - Hydraulic quick coupler - Additional circuit (front and rear) - Beautiful original condition - Well-maintained machine - Incl. pallet fork - Incl. hay fork - Incl. road approval B - Incl. all documents Selling price: 36,500,-- net Affordable delivery also possible! For an additional charge, also available with a new bucket or a new work platform!

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 4,400 kg, lifting height: 8,800 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 9,530 kg, total length: 5,570 mm, drive type: Diesel, construction width: 2,400 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Nodpjzhyprefx Ac Aolg Front tires size: 500/70 r 24 michelin xcml Rear tires size: 500/70 r 24 michelin xcml