Panel van

IVECO Daily 35S16 Hi-Matic Kastenwagen L2H2

Condition: used, mileage: 199,000 km, power: 115 kW (156.36 HP), first registration: 01/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: red, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,963 mm, total width: 2,010 mm, total height: 2,660 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage compartment package, center console with storage compartment, map pocket with front cup holder, 13-pole trailer socket, trailer socket preparation, audio system: digital audio system (DAB+) with USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, roof storage compartment with DIN compartment, digital tachograph, grab handle A-pillar, holder with USB connection (tablet/smartphone), rear door (opening angle 260/270 degrees), wooden floor in the cargo area with wheel arch trim and high side wall/door trim, automatic climate control, cooling compressor 170 ccm, interior filter: pollen filter, comfort headrests in the passenger compartment, fuel tank: 90 liters, exterior loading light above the rear doors, LED cargo area light, cargo area partition with window, smoker's package, spare wheel in driving condition, spare wheel holder between the floor longitudinal members, reversing aid with sensors, seats in the cab: driver's seat comfort (hydraulic) Additional equipment: Driver's side airbag, traction control system (ASR), comfort dashboard blue, design: S-series, exhaust pipe on the side left, exterior mirrors electrically adjustable and heated, cargo area ceiling light, electronic brake force distribution, rear axle suspension: leaf spring, front axle suspension: transverse leaf spring, wing doors at the rear, front and side windows tinted, generator 180 A, speed limiter system 160 km/h, urea tank (AdBlue): 20 liters, body/structure: high-roof van with overhang, instrument cluster with pixel matrix display, radiator grille blue, headlight range adjustment, engine 2.3 liters - 115 kW diesel SCR, wheelbase 3520 mm, tire repair kit, low emission according to Euro 6 emission standard, headlight bezel blue, sliding door cargo/passenger compartment right, seats in the cab: passenger single seat, 3-way adjustable, start/stop system engine, control unit overhang, maintenance indicator, permissible total weight 3.50 t The vehicle is in good condition! Knsdez D Hi Ispfx Aldob 2 units in stock! Valid TÜV (German vehicle inspection) until 02-2027.

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. Knedpfxjhqmamo Aldeb The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: ready for operation (used), We have a BECK HV600 shrinktunnel available. This machine is ready and is working like new! The measurements are in the pictures. Knsdpfx Aehcdhljldsb

Condition: used, mileage: 193,980 km, power: 130 kW (176.75 HP), first registration: 04/2011, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, tail-lift, Iveco Eurocargo 75E18 - Recent box body - Tail lift - 3 seats - Manual transmission - CD radio - 7-speed manual gearbox - Front axle tyres: 215 / 75 R17.5 Subject to errors and prior sale. Kodpfx Aswyicujldjnb Internal vehicle number: 11 WhatsApp support available! If you have questions about the vehicle or would like further information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) Kedpfjmhhypjx Aldonb - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z axis range: 500 – 1500 mm Knsdpon Nv H Sefx Aldob Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Construction: Steel welded, ribbed, stress relieved, precision machined Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard Knjdpfx Ash Ek Daoldjb = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: used, machine/vehicle number: 050189, for groove width: 13 - 30 mm for groove depth: 22 - 35 mm milling cutter speed: approx. 1200 rpm Kedpfxob Amlhs Aldsnb drive motor: alternating current 220 V, 1020 W weight: approx. 6 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, mobile circular saw for cutting bricks with extraction Knodpfev Ivx Tjx Aldsb

Condition: good (used), A-100730-Horizontaltank 16m3 Horizontal tanks 16.000 L, Stainless Steel AISI 316, Dimension: Ø 2530 mm X H 2900 m L 3800 mm Manhole at front Knjdpeiiyufefx Aldeb Only 2 pieces identical to offer