Die cutting press

Iberica DG-60-B

Year of construction: 2004, condition: good (used), machine/vehicle number: 75M1001, PILE TURNER Knodpfxem E Uh Ej Aa Ejf

Condition: used, Year of construction: 1991, HEIDELBERG GTO 52-2 ZPN Numbering preparation 1991 vintage , numbering preparation, good cylinders, no damage, documentation, tools. Kodjrllciopfx Aa Eenf

Year of construction: 1965, condition: ready for operation (used), Max. working width: 1200mm, clear span: 70-150mm, table dimensions: 1700x1400mm, working height: 850mm, roll diameter: 250mm, connected load: 2.2kW, weight: 800kg. Knodolc N Szspfx Aa Esf

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section Kjdpswypp Iefx Aa Esnf - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, Year of construction: 2003, - Folding stations: 1st folding unit with 6 pockets (parallel fold) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) - Folding stations: 3rd folding unit with 2 pockets (parallel fold) - Max. sheet size: 520 x 840 mm - Min. sheet size: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on fold type and material) - Paper weight: 40 – 250 g/m² - Folding types: single fold, roll fold, zigzag fold, double parallel fold, and more - Feeder: flat pile feeder (PBA) - Control: electronic control with folding program memory - Delivery: shingle stream delivery (STA) - Optional: perforating, creasing or cutting units (depending on configuration) - Format adjustment: manual - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Special features: - Robust construction with high precision Knjdpfowv D Svjx Aa Eof - Suitable for small and medium print runs - Ideal for commercial printers and finishing companies 1 punching tool NE 515 SBP 46-2 vertical sheet delivery, year 1992

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, load hours: 60,790 h, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Knsdsh Tk Rvjpfx Aa Esf Total size L x B x H: 4,0 x 1,5 x 2,1 m

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Ksdpfxjtyy Sfe Aa Esnf Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, Fully overhauled Knodpfxeriui To Aa Ejf

Condition: used, Year of construction: 2008, machine/vehicle number: 1, Schwertfalzwerk Eigensteuerung - Mobile Knife Folding Unit SelfControl MBO Z6 Year 2008 - Serial-No. 101682080415 Einlaufbreite / Infeed width min. 150mm - max. 480mm Kodeivbbzjpfx Aa Eonf Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 160m/min Produktivität / Productivity 15.000 cycles/h Antriebsregelung / Drive control MC Control with potentiometerAuf Anfrage Koppelbox MC Control auf Navigator / On request Couple Box MC Control to Navigator Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1997, condition: good (used), Built in: 1997 Size: 311 x 355 mm Speed: 9.000 c/h Equipment: gathering chain & feeder: • 8 stations chain • with double feeder • 1 folder feeder stitching unit & trimmer: • stitching unit Kodpfxedym Ste Aa Esnf • 2 stitching heads • trimmer • belt delivery with counter