Stairway bridge

Hymer

Condition: excellent (used), Year of construction: 2009, Private sale: Hymermobil with numerous extras. Features include 2 air conditioning units, 2 auxiliary heaters (diesel, gas, and electric), ceramic toilet with 2 cassettes, rear garage, first registration 24.08.2009. Crsdjpl Sngspfx Aptef Other highlights: drop-down bed, leather upholstery, shower, 2000-watt generator with dedicated built-in petrol tank (operable from inside above the oven), 4 solar panels, 1 vehicle battery and 3 habitation batteries (1 year old), 3,300 kg towing capacity. Iveco chassis with automatic transmission, cruise control, 5,400 kg permissible gross weight, 100 km/h speed approval, 2 heated external drawers, underfloor heating and hot water operated via gas or electricity. Includes 2 gas bottles with automatic switchover, twin rear tires, only 78,000 km driven. External shower with hot water, Goldschmitt rear air suspension, rear single beds with option for a full-width sleeping surface (2 additional sections, both long and short available). Automatic satellite system, 2 TVs. Vehicle inspection valid until May 2026 without defects. Approved for transport of up to 8 persons. First registration 24.08.09, 130 kW diesel, very economical—current consumption at 100 km/h is 12.1 l/100 km, at 80 km/h only 10 l/100 km. Vehicle length: 8.19 meters. Additional locks on entry door, separate driver’s cab door, and both garage doors. Reversing camera with multiple viewing angles. Large air awning, kitchen cabinets, carpet, etc., for outdoor use available and can be included if interested.

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Codpfx Ajrt Uvzsptjrf Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) Cjdpfxjrgzv Ns Aptjrf * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, functionality: fully functional, power: 195 kW (265.13 HP), fuel type: diesel, color: yellow, overall weight: 18,500 kg, Year of construction: 2023, machine/vehicle number: SW4055CD00288, Equipment: air conditioning, cabin, cruise control, standard shovel, The new SANY SW405 wheel loader takes productivity to the next level. With its powerful Deutz common rail diesel engine and rugged, robust frame design, it is the ideal choice wherever power and reliability are required. Its distinguishing features are strong unloading forces and large tipping loads. Moreover, with its many equipment options, this powerhouse is a multipurpose machine that can handle a wide range of wheel loader tasks with flying colors. Crsdpfxsrblkko Aptjf

Condition: new, Year of construction: 2024, SCHORR ride-on sweeper Electric sweeper Street sweeper Floor sweeper Powerful and smooth-running sweeper for indoor and outdoor use. With switchable spray nozzle. The ride-on sweeper offers a convenient and efficient solution for floor cleaning. The ergonomic seat and intuitive controls enable effortless operation, even over long periods of time. The powerful motor ensures thorough cleaning even in demanding conditions. With a generous 80-liter collection container, large areas can be cleaned without frequent interruptions. This combination of convenience and efficiency makes floor cleaning a stress-free and enjoyable task. The LED work lights fitted as standard make it easier to work in darker areas. With an output of 1920 watts from 48V, the sweeper is equipped with enough power to get you comfortably to over 4 hours of continuous use. SCHORR RR80KM ride-on sweeper - Discover the advantages: -- Fully electric ride-on sweeper with 1250mm working width - ideal for large indoor and outdoor areas -- 48V/1920W power -- 80 liter bagless rear collection container, easy to extend and empty -- Powerful system with 48V and 58Ah -- With switchable spray nozzle for less dust turbulence -- Extremely easy to operate -- Outstanding maneuverability Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR80KM Drive: Seat Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tires: PU (non-slip) Own weight: 400kg Basic dimensions Collecting tank volume: 80l Fresh water tank volume: 10l Main brush diameter: 500mm Cedpsuac D Usfx Aptjrf Total length: 1600mm Total height: 1300mm Total width: 1250mm Sweeper width (without brush): approx. 80cm *Further technical data available on request. The chassis is made of flexible and robust plastic all round, which reduces potential damage to walls, for example. Apart from the side bristles, nothing protrudes beyond the cladding so that work can be carried out as closely as possible to objects. The collection container is made of sturdy steel and can be easily removed from the rear of the machine. Sensitive components such as the headlights are protected by a metal bumper. Overall, the machine is perfectly equipped for most applications. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on sweeper. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: good (used), Powered and non-powered roller conveyors by SSI Schäfer • Partially accumulating roller conveyors • Available in various lengths and can be adapted to your individual storage project • Clear width: approx. 460 mm • Infeed and outfeed units available • Roller conveyor curves available Credpogpw Rnofx Aptjf Large quantities of well-maintained, powered and non-powered roller conveyors are available. Please refer to the attached images for further information. The drawings show the current assembly status, which can, of course, be modified. We will gladly assist you with transport! Payment can be made exclusively via: • Bank transfer • Advance payment Prices are quoted as net prices (plus VAT). You will, of course, receive an invoice with VAT clearly stated. Please also check our other listings. If you can't find what you are looking for, do not hesitate to contact us.

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Crodpou Idfrefx Aptef Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Track width: 540 mm Rollers: Conical Cedpfx Aeglandjpterf

Condition: used, power: 37 kW (50.31 HP), color: yellow, Year of construction: 2020, Empty weight: 3.300 kg Codjyaznnspfx Aptjrf

Condition: excellent (used), I will sell a DDR motor pump. - 800l/min Crjdpfx Apov Nrf Eotjf - 28PS. - Very good condition.