Toggle bolt

Hilti EKD-HM4

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. Kljdpfoxk T Efjx Amrsu All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: refurbished (used), 100,000 liter buffer tank / pressure vessel, standing on a stand ring Vessel data: Volume: approx. 100,000 liters Operating pressure: max. 2 bar Operating temperature: max. 90°C Inner diameter: 3,000 mm Total height with feet: approx. 16,750 mm Ground clearance: approx. 800 mm Vessel with dished ends. Tank Equipment: ⦁ 1 DN 600 manhole with blind cover ⦁ 7x 3/8" pipes, closed inside the tank, open outside ⦁ 2 lifting eyes in the shell area ⦁ 2 lifting eyes on the top of the tank Klsdpfx Amjwf N Sterou ⦁ 2 lifting eyes on the tank feet ⦁ 1 2" drain, connected to the side of the shell with a ball valve ⦁ 1 Ø33.7 x 3.6 mm vent, connected to the side of the tank and down outside the insulation, with a ball valve ⦁ 1 DN 125 connection, ending in a flange on the outside, and connected to the center of the tank with a 90° bend ⦁ 1 DN 125 connection, ending in a flange on the outside, connected to the top of the tank and connected to the center of the tank via 2x 90° bends We are happy to offer the new tank insulation in any thickness upon request. Please contact us if you are interested!

Condition: excellent (used), Year of construction: 2005, Hot water tank/heat storage tank made of V4A, upright Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: Storage tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: unpressurized Wall thickness shell / cylinder: approx. 5.3 - 7 mm mm Ground clearance: approx. 1,800 mm Operating temperature: -10°C/+90°C degrees Celsius Material / properties Material inner jacket: V4A (1.4571) Material double jacket: Stainless steel Inner surface: 2B Weld seams ground on the inside Insulation Insulation available Insulation thickness: approx. 100 mm Insulation material: Mineral wool Insulating jacket material: Aluminum Insulating jacket: screwed/riveted Notes: Cone roof cladding: Stainless steel Cylinder cladding: Aluminum trapezoidal sheet Cone cladding: Aluminum smooth sheet Equipment Stand form: foot ring/stand frame Fastening: fixed Top shelf type: Conical base Bottom shelf type: Conical base Top floor: 1 x dome DN 200 with insulating cover 1 x flange DN 32 welded in the dome (CIP) 1 x DN 32 dome drainage 1 x DN 50 cable conduit 1 x overflow DN 150 2 x crane eye Jacket: 1 x inlet pipe DN 100 1 x filling pipe DN 100 4 x thermometer sleeve (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x type plate 1 x access door (approx. 2,000 x 1,000 mm) 1 x DN 100 outlet nozzle Underbody: 1 x swivel cone DN 450, ending in smooth flange DN 100 Kodeqagl Hepfx Amrelu Notes: Otherwise as per pictures and drawing documentation Drawing

Year of construction: 2025, condition: new, X-ray inspection system for middle-sized bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 410 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass, from Ø 1.2 mm; X-ray output: 80 kVp, 1.25 mA; X-ray detector resolution: 0.4 mm; X-ray emissions: < 1usv/h; conveyor belt height: 850 ± 30 mm; conveyor speed (dependent on product dimensions): 10 – 100 m/min; screen: 15" touch screen; software: intellisens®X-ray; operating temperature: 5 – 35 °C; reject system: optionally available according to requirements; power: 220VAC, 50/60Hz; dimensions of the system L900xW920xH1825 mm; weight: 350 kg. Klodsv Nm Inopfx Amrsu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), functionality: fully functional, mileage: 243,000 km, power: 250 kW (339.91 HP), first registration: 08/2013, fuel type: diesel, next inspection (TÜV): 11/2026, suspension: air, Year of construction: 2013, Equipment: ABS, EBS, air conditioning, airbag, blind spot assist, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, non-smoking vehicle, parking heater, power assisted steering, power mirror, seat heater, tire pressure monitoring, trailer coupling, Used Q7, 4.2 L engine, 7 seats, sunroof, S-LINE... (8 sets of tires with alloy rims, trailer hitch, reversing camera, adaptive cruise control, auxiliary heating, €14,000) Ksdpfxeyza Drj Amrelu

Condition: new, empty load weight: 128 kg, maximum load weight: 622 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,265 mm, loading space height: 1,100 mm, tire size: 13, wheelbase: 155 mm, color: grey, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK AND THE NETHERLANDS. UT004183 The Garden Trailer 201 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. Kjdpoir H Rpefx Amrolu When ordering a car trailer, please state the GVW of the vehicle with which you are towing the trailer. Technical data of the Garden Trailer 201 KIPP car trailer WHEEL - Steering axle from Knott or AL-KO Wheel size: 155/70 R13 Tiltable V-drawbar, which can be folded under the base plate of the trailer at any time CONSTRUCTION - Support frame made of hot-dip galvanized sheet steel Curved profiles with bolts were used Loading area: anti-slip and water-resistant screen-printed floor panel, 9 mm thick SIDEWALLS - all sidewalls are made of galvanized steel Delivery costs are charged additionally.

Condition: used, 🧰 Product Features • Condition: Used item, see photos • Colour: grey • Material: metal • External dimensions: 124 x 83.5 x 45 cm • Load capacity: 1000 kg • Stack load: 4000 kg • Weight: 56 kg • Front side foldable • Incl. sheet metal base 💰 Price €59,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible at any time by appointment Over 5000 linear metres of pallet racking from various manufacturers permanently in stock Kledpjw Eb Slefx Amrju (Specifications, details and prices subject to change and errors excepted! See our terms and conditions. All prices ex warehouse, excl. VAT.)

Condition: new, turning length 850 mm Kedsxaaxwepfx Amrolu turning diameter 400 mm swing diameter over bed slide 245 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 260 mm spindle taper DIN 55029 D 1-5 taper in tailstock 3 MK quill travel 120 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1255 kg range L-W-H 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip rear wall - Operating tool

Condition: new, Technical data of the grating: Manufacturer: Gi-Ro Vreden Condition of the goods: new (unassembled) Reason for return: wrong order end customer The scope of delivery includes: 01x pressed grate, new (unassembled) Material color: hot-dip galvanized Total depth: 1,000 mm (bearing bar direction) Total width: 980 mm (cross bar direction) bearing bar dim.: 35/1,7 mm S355JR TS anti-slip: no QS anti-slip: no Klodjk Ebq Tspfx Amrsu edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9,35 kg | pcs. Internal designation: R

Condition: new, Various bimetal saw blades, HSS, in the following dimensions: 1735 x 13 x 0,9 mm 1630 x 13 x 0.9 mm 1440 x 13 x 0.65 mm 1138 x 13 x 0.65 mm 2375 x 20 x 0.9 mm 2465 x 20 x 0.9 mm 2085 x 20 x 0.9 mm 2130 x 20 x 0.9 mm 2140 x 20 x 0.9 mm 1900 x 20 x 0.9 mm 2000 x 20 x 0.9 mm 2750 x 27 x 0.9 mm 2835 x 27 x 0.9 mm 2850 x 27 x 0.9 mm Klsdpfxjc R Tyfj Amrsu 2950 x 27 x 0.9 mm 3150 x 27 x 0.9 mm 3320 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 2910 x 27 x 0.9 mm 2450 x 27 x 0.9 mm 4530 x 27 x 0.9 mm 4500 x 27 x 0.9 mm 4400 x 34 x 1.5 mm 4640 x 34 x 1.1 mm