Glass transporter

Ford Transit 2.5 TDI KA Hoch HEGLA GLAS Luftfederung

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 4.4 kW (5.98 HP), Schiatti Angelo FPD60 Bohrmaschine doppelseitig Nedpfxowd Erto Ad Nowb Max. width: 1.100 / 1.300 / 1.600 mm Glasthickness: 2-28 mm Max. Drilling Diameter 3-100 (automatic) 3-200 mm (manuell) RPM: 200 - 4500 U/Min frequenzy controlled Electric consumption: 4,4 KW

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW Nwodpfx Adsh U Damj Neb speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information.

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Min. pane size: 250x180mm Nedowikn Rspfx Ad Njwb Gas filling press: Models and triple available

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, heating capacity: 1,600 kW (2,175.39 HP), Equipment: documentation/manual, hot water, Polzenith Heating Boiler 1.6 MW, year of manufacture 2007 Very well-maintained combustion system by Polzenith with a heating capacity of 1.6 MW. Complete system including: - Fuel storage. Steel construction with walking floor - Scraper conveyor Nwodjw Nrr Nepfx Ad Nob - Beth electrostatic precipitator with electrical cabinet - Chimney approx. 12 m high - All flue gas lines - Complete with control panel and hydraulic unit System has been professionally dismantled and is immediately ready for loading.

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, Lisec Nsdpjvy Ef Hsfx Ad Nswb FPS-25/20U2 2011 Lisec gas press 2000 x 2500 mm Right-Left S-IGL-1892

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Nwedpsr Ak Exofx Ad Neb Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Hydro 3000.6 Max. Glas-height: 3.000 mm Nwsdpfx Adewd N Urs Neb Thickness: 3-22 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 6 brushes (150 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: excellent (used), Year of construction: 2015, CNC glass milling and working centre NEPTUN QUICKMILL 160-30 NC Year of production: 2015 Milling, seaming of milled profiles and drilling (only with frontal head) Maximum working height: 1600 mm Maximum working length: 3000 mm Nwedpfjrzazyox Ad Njb Minimum glass size: 800 x 340 mm Glass thickness: 5 - 12 mm NC controlled (with software) Excellent condition Good working order, still in production As is Available immediately

Condition: not inspected (used), Year of construction: 1995, functionality: fully functional, Lisec sealing robot for second seal type VL-1/25-2, for maximum unit size 3500 x 2500 mm, running direction right to left, consisting of following: RTV-11/25VE, inlet conveyor with width measuring device for glass and frame thickness VL-1/25-2, sealing robot for double glazing units DOS-1TH, 2k metering station for Thiokol Nwedsrrvkbopfx Ad Njb The machine will be completed and tested in simulation mode prior delivery

Condition: good (used), Year of construction: 1999, overall weight: 1,500 kg, Rack with 10 sliding shelves Nwsdpfx Adow Sdtwj Neb Glass support: 65 mm Load capacity 10x300 kg Max. loading height: 1650 mm External dimensions for transport: Width: 1500 mm Depth: 2600 mm Height: 2060 mm Weight: approx. 1500 kg