Second-hand machinery for sale (200,000)

Condition: used, Guttridge Bulkflo Mobile screw elevator Gkedpfxoz Ak R Ae Amyob Stainless, mobile elevator screw conveyor, with a 400l holding hopper, horizontal discharge screw feeds directly onto the screw elevator, discharges at 2600mm, 160mm screw diameter, with vibratory mesh top, also three spare meshs, mobile, 3Ph

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 865 h, machine/vehicle number: Z34N07-7037, load capacity: 227 kg, overall weight: 5,300 kg, transport length: 5,800 mm, transport width: 1,480 mm, transport height: 2,030 mm, working height: 6,800 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working height: 6,800 mm Platform height: 10,500 mm Gkjdpfx Amozza Tqjysb Platform load capacity: 227 kg MACHINE DETAILS Fuel type: Electric Tires: Solid rubber tires Operating hours: 865 h Dimensions & Weight Transport dimensions (L × W × H): 5,800 × 1,480 × 2,030 mm Unladen weight: 5,300 kg EQUIPMENT User manual CE marking

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. The machine is located in our showroom and can be inspected while running! Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. Gedpfxozyq Ebo Amyjkb - Coolant gun. - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: W25-M5-18-17210, number of axes: 7, The measuring arm was last calibrated in October 2024. The laser scanner was calibrated in April 2024. TECHNICAL DETAILS Measuring system: FARO Quantum M ScanArm Measuring range: 2.5 m Axes: 7 Measuring method: Tactile coordinate measurement and 3D scanning Laser scanner head: FARO LLP HD, Revision 3.2 MACHINE DETAILS Application areas: Dimensional inspection, CAD component comparison, first article inspection (FAI), production control, tool and fixture inspection, and reverse engineering Gedpfx Aozx N Rgjmyokb Measuring stand height: 750 - 1,000 mm Measuring stand weight: 17.25 kg Reach: 350 mm EQUIPMENT FARO LLP HD laser scanner head, Revision 3.2 Tactile probes MetrologyWorks Kodiak HDP-KCF measuring stand Measuring stand construction: Carbon fiber/aluminum Measuring stand mounting ring: 3"-8 Original FARO transport case Batteries Power supply Cables Mounting accessories Calibration documentation Technical documentation Manual Note: The laptop and PolyWorks software are not included in the offer.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 905312, functionality: fully functional, cutting height (max.): 2,150 mm, cutting width (max.): 4,150 mm, saw blade diameter: 250 mm, overall weight: 850 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. vertical cutting height: 2,150 mm Max. cutting width: 4,150 mm Max. cutting depth: 55 mm Max. saw blade diameter: 250 mm Vertical cutting: Yes MACHINE DETAILS Gksdpfxezzbb Ao Amyob Voltage: 380 V Current consumption: 6 A Power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 1,350 x 2,830 mm Weight: 850 kg Shipping packages: 1 unit EQUIPMENT CE marking

Year of construction: 2002, condition: used, Empty weight: 2.700 kg Dimensions (LxBxH): 750 x 360 x 230 cm Serial number: 302900081.0 Equipped with an automatic stop system and safety guardrail. Brand: MPS Type: Powerstop Year of manufacture: 2022 Conveyor length: 6200 mm Conveyor width: 630 mm Danobat information: Cutting capacity: 440x440 mm Weight: 2,700 kg Power: 75 kW Equipped with: automatic chip removal Setup dimensions (LxWxH): 7,500x3,600x2,300 mm Online auction of construction, welding, and metalworking machinery and tools (e.g., DANOBAT, BOMAR, WORTELBOER, FRONIUS, ADK, LINCOLN, etc.), as well as vehicles (various LINDE and STILL forklifts, 4 Mercedes Sprinters, 2 VW TRANSPORTERs, etc.), transport and material containers, and office inventory originating from the recent bankruptcy of MOB Mechanical Contracting BV in Rotterdam, the Netherlands. The online auction opens Friday 11 September and closes Wednesday 30 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 28 September Pickup days are on: - Monday 12 October - Tuesday 13 October - Wednesday 14 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices. Gkedpfoz Ah Dtex Amysb

Condition: used, Year of construction: 1996, total width: 1,700 mm, total height: 1,650 mm, Colour: Grey Empty weight: 2.500 kg Dimensions (LxBxH): 400 x 170 x 165 cm - Year: 1996 - Documentation available: Yes - CE certificate present: No - Serial number: 123-2001 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 150 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Vertical spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 140 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Vertical spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 120 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 Gkjdpozuayqjfx Amyob - - Tool present: Yes - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 140 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 160 - - Tool present: Yes - Max. planing width [mm]: 260 - Max. planing height [mm]: 120 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Tool type: Standard - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 380 - Current consumption [A]: 84 - Fuse [A]: 100 - Power [kW]: 39.0 - Transport dimensions: 4000mm x 1700mm x 1650mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: not inspected (used), Year of construction: 1998, overall weight: 4,200 kg, Fanuc 21T control 12-position turret Gkedpfx Amez Akxyeysb Working envelope: 600 x 350 mm Spindle speeds: 3500 RPM

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DMU 40 evo was manufactured in 2013. It features a maximum spindle speed of 18,000 rpm and a tool magazine capacity of 60 tools. The working area measures 400 x 400 x 375 mm, providing ample space for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DMU 40 evo vertical machining centre we have for sale. Contact us for further details. • Tool taper: HSK 63 Godpfx Amoz Aki Sjyokb • B-Axis: Yes • C-Axis: Yes • Tool magazine capacity: 60 tools • Machine works on a knuckle style table • Machine is fully assembled • Machine is currently in storage and cannot be powered on due to its location • Approx. GBP 15,000 recently invested in repairs/service • Two drives have been removed and require refurbishment: Main Heidenhain power drive and X-axis drive • The drives can be reinstalled through the rear electrical cabinet • Reinstallation is relatively straightforward and mainly requires reconnecting the electrical connectors • Machine is currently not operational until the two drives are refurbished and reinstalled

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9.233, Year of construction: 2017, operating hours: 12,400 h, load capacity: 7,000 kg, lifting height: 8,050 mm, free lift: 2,730 mm, fuel type: diesel, mast type: triplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting height: 8,050 mm Free lift: 2,730 mm Lifting capacity: 7,000 kg Mast height: 3,730 mm Fork length: 1,190 mm Maximum fork width: 1,530 mm Minimum fork width: 590 mm MACHINE DETAILS Mast type: Triplex Fuel type: Diesel Drive direction: 2 Dimensions & Weight Dimensions (L x W x H): 5,250 x 2,100 x 3,730 mm Overall width: 2,100 mm Overall height: 3,730 mm Unladen weight: 12,820 kg Gsdpezxdk Ujfx Amyekb Operating hours: 12,400 h EQUIPMENT Fork adjustment Full cab Heater Pneumatic tires Work lights Joystick Free lift Documentation CE marking:

Year of construction: 2021, operating hours: 30 h, condition: like new (used), functionality: fully functional, 1 x Unifiller Systems Inc. food depositor mounted on a mobile height-adjustable frame. This is a compact, versatile machine which is easy to clean for a quick product changeover. Handles most fillings without particulates Manufacturer - Unifiller Systems Inc. Model - iSpot. Serial number - ISP103177-001-01. Date of manufacture - 2021. Depositing range - 35ml to 237ml (2'' cyclinder). Speed - adjustable, up to 150 deposits / minute depending on product type and volume. Operating temperature - up to +60C. Fits containers up to 23” deep (80 quart Hobart bowl). Godpfx Amjyv E Ryeyekb Condition - full working order and excellent condition for its age. Used sporadically over a period of around 5 months and is believed to have had less than 30 hours of run time.

Condition: good (used), Year of construction: 2016, functionality: fully functional, input voltage: 240 V, year of last overhaul: 2026, Equipment: CE marking, Machine in excellent condition Gkedszzmfyopfx Amyeb

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Gkjdpfx Amozzwg Uoyob Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516330X00410, Year of construction: 2020, operating hours: 4,221 h, load capacity: 5,000 kg, lifting height: 3,480 mm, mast type: simplex, construction height: 2,650 mm, Equipment: sideshift, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 3,480 mm Overall height: 2,650 mm MACHINE DETAILS Mast type: Simplex (standard mast) ISO class: ISO Class 3 (2,500–4,999 kg) Drive type: Electric Battery voltage: 80 V Godezy U S Ejpfx Amyekb Battery year of manufacture: 2020 Operating hours: 4,221 h EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve Heater Full cabin Air conditioning External reference: SL11669SP

Year of construction: 2022, condition: excellent (used), functionality: fully functional, 1 x Yamato Dataweigh 14-head weigher with RCU-920 Remote Control Unit touch-screen control panel, top cone and collating funnel. Fitted with smooth weighing pans this weigher is ideal for free-flowing dried goods only. Model – ADW-E-1014S (Dataweigh Epsilon Series). Serial number - WG251076. Date of manufacture - 2022. Weighing range - 20g to 3000g. Maximum pack volume - 10 litres. Speed - up to 100 drops / minute. Electrical requirements - 200-240 V / 50-60 hz / 1 phase. Overall dimensions - 1600mm long x 1600mm wide x 1530mm high. Godpfxezydaxe Amyskb Supplied with User Manual, Drawings (including electrical) and Parts Manual.

Condition: used, A used VR Twin Paddle Mixer - tested and working but will need new switchgear for motors with relevant safety interlock connected Video available by request on Whats App Gsdpfx Aozc Nz Ujmyskb Ready to ship worldwide Open to realistic offers

Condition: ready for operation (used), A good used ZD130 Kawasaki Palletising Robot and controller with Teach Pendant - D Controller Ready to ship worldwide Gjdpfxszrxf Te Amyekb

Condition: used, Year of construction: 1998, total width: 2,600 mm, total height: 1,900 mm, Colour: White Empty weight: 6.500 kg Dimensions (LxBxH): 590 x 260 x 190 cm - Details: - └ Description: Gas springs are weak - Year: 1998 - Documentation available: No - CE certificate present: No - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 Gjdpexlthisfx Amyekb - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - Min. planing width [mm]: 15 - Max. planing width [mm]: 230 - Min. planing height [mm]: 10 - Max. planing height [mm]: 150 - Feed table length [mm]: 1570 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 5.5 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 120 - Options: Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 24 - └ Feed speed control: Incremental - Transport dimensions: 5900mm x 2600mm x 1900mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €64,000 net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Gkedpfx Amszzdyzeyob Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €64,000 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 63284-0012, turning length: 650 mm, turning diameter: 300 mm, spindle motor power: 15 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 680 mm, milling spindle length: 6,000 mm, type of input current: three-phase, bar passage: 65 mm, total height: 1,920 mm, total length: 3,130 mm, total width: 1,710 mm, spindle nose: A2-6, overall weight: 4,500 kg, Equipment: documentation/manual, MACHINE INFORMATION Manufacturer: Hyundai Model: KIA SKT2100SY Year: 2009 Condition: (Used) Great Serial Number: 63284-0012 Control: Fanuc Control Accessories: LNS Barfeed, Live & Static Tool holders, Swarf Conveyor, Parts Catcher, Tool Probe. Location: COVENTRY, UNITED KINGDOM MACHINE SPECIFICATIONS Control: Fanuc Control Bar Capacity: 65mm Chuck Size: 8″ Main, 6″ Sub Max Cutting Diameter: 300mm Max Cutting Length: 650mm Spindle Speed: 5000rpm Turret Positions: 12 Milling Speed: 6,000rpm Swing: 820mm X Axis Travel: 215mm Y Axis Travel: 110mm total (+55mm) Z Axis Travel: 680mm C Axis Travel: 0.001 degree Gedpozwhp Sjfx Amyskb

Year of construction: 2012, condition: refurbished (used), functionality: fully functional, This is a combination steamer, model SCC 61WE, from the premium manufacturer Rational, in an electric version. This combination steamer is equipped with a racking system with 6 shelves. The unit has been completely overhauled in our in-house workshop and is fully functional. The base shown in the picture is not included in the offer but can be purchased as an option. These are example images; actual images will be available soon. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician. Are you looking for a specific Rational appliance model? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Gjdpfxez Ahvpo Amyokb Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This combination steamer offers space for 6 x 1/1 GN containers. In automatic mode, the unit automatically recognizes the ideal cooking process, the size of the food, the quantity, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 782 mm Power connection: V: 400 / kW: 11.0 / Hz: 50/60 Capacity: 6x1/1 GN Weight: approx. 103 kg Serial number: E61SH12062305275 Year of manufacture: 2012 Condition: used, completely overhauled, fully functional Additional information: With care Control - self-cleaning system In combination steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C) and combination (30°C to 300°C) Core temperature probe Hand spray with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time setting 7 cleaning levels for unattended cleaning - even overnight Steam injection adjustable in 3 levels - from 30°C to 260 °C 5 programmable proofing levels USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 09:00 to 13:00 and from 14:00 to 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Gkjdozyay Ijpfx Amysb Clamps: 3 Tool positions: 180 MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, Haas VF1 Vertical Machining Centre,2011, table 660 x 356mm, trav 508 x 406 x 508mm, bt40, 20atc, 7,500rpm, rigid tapping , Liquid cooled, Chip conveyor Gkedpezwuryjfx Amyob

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,161 h, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 270 mm, number of axes: 3, This 3-axis Sodick AG40L LN2 was manufactured in 2015. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 270 mm. The machine has been operated for 13,161 hours and is currently connected and available for inspection/testing. If you are looking to get high-quality die-sinking capabilities, consider the Sodick AG40L LN2 machine we have for sale. Contact us for further details. • CNC Sinker EDM Godpfoz Akwiex Amyekb • Year: 2015 • Made in: Japan • Axes: 3 • Machine connected and available for inspection/testing.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 37,083 h, controller manufacturer: FANUC, This 3-axis FANUC ROBODRILL alpha-D21LiA5 was manufactured in 2015. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine has a weight of 2200 kg and is equipped with a Blum laser tool measurement system. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL alpha-D21LiA5 vertical machining centre we have for sale. Contact us for further details. • Machine weight: 2200 kg • X-Axis: 700 mm • Y-Axis: 400 mm • Z-Axis: 330 mm • Main electronic connection: 200/220 V, 3-phase, 50/60 Hz • Power consumption: 10 kVA • Machine type: CNC Vertical Machining Center • Year: 2015 • Made in: Japan • Serial number: P157YH978 • Tool measurement: Blum laser tool measurement system with A2 reference • Workpiece measurement: Renishaw OMP probe Godpfxsz Akuus Amyekb