Second-hand machinery for sale (75)

Condition: used, functionality: unexamined, mileage: 3,933 km, power: 55 kW (74.78 HP), fuel type: diesel, Year of construction: 1970, Equipment: car registration, crane, Vintage vehicle registration, H-plate New TÜV inspection! Valid until 06/2027 Complete and traceable history! The Unimog is from its second owner. Original registration document from the first owner and a new registration document from the second owner are available! In 1971, it was converted into a two-way vehicle by 2-Wege GmbH & Co. KG. In 2013, the two-way system/rail guidance system was removed. The picture shows the Unimog with two-way tires. A set of rims with tires featuring a lug pattern will be included. The disassembled rail guidance system will be included. Complete service history with offers and invoices from 1970 onwards is available! Engine and chassis were completely overhauled by MINUFA, invoices available. Frame and platform body are rust-free, as they were professionally preserved with wax. Chassis also overhauled and rust-free, except for the driver's door. Equipped with a mounting plate for a snowplow. Trailer hitch from Rockinger. Trailer coupling. Rear PTO shaft. Three-point linkage / agricultural. Hfsdpezvytysfx Acgel Hydraulic connections: Rear: 2 supply and return lines. Front: 4 supply and return lines. Hydraulic winch at the front with a 6-ton pulling force, manufactured by Ramsey. Electric winch with 500 kg pulling force and crane with 500 kg lifting capacity behind the driver's cabin. Short loading platform.

Condition: not inspected (used), functionality: unexamined, The oven is lined with fireclay bricks and is suitable for baking bread, pizza, tarte flambée, and other delicacies, such as, for example, pork knuckle. Hfsdpfx Ajzvytaecgjl The trailer comes from the bankruptcy of a catering company.

Condition: used, Year of construction: 1994, functionality: unexamined, Serial No.: 30194.117.0 Hfsdpozvyq Sofx Acgel Roll bar including wiring harness including robot hand-held control unit including control software and logbook

Condition: used, Year of construction: 2003, functionality: unexamined, Serial No.: 14-26298 Hfodszvyqfepfx Acgel Recorded operating hours: 59,762 h Robot teach pendant

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Serial No.: 14-22267 Total operating hours recorded: 64,363 h Hsdpfxjzvypzo Acgjfl Robot teach pendant

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 102387, on rollers with foot switch eyelet size 3.5 mm with rivet tool Height: 128 cm Hodozvypbspfx Acgofl Width: 120 cm with table, machine only 70 cm Depth: 78 cm

Condition: used, Year of construction: 2003, functionality: unexamined, IRB 1400 M2000 industrial robot DEFECTIVE, SUITABLE FOR USE AS A SOURCE OF SPARE PARTS Serial No.: 14-26293, Robot version: IRB 1400 including ABB robot controller Hsdpjzvymtefx Acgofl Model S4C IRB1400 M2000 Recorded operating hours: 58,159 hours Robot teach pendant Cable set MSA: Robot cable is porous - functional.

Condition: not inspected (used), functionality: unexamined, Connection voltage: 400 V Hfodjzvyl Nopfx Acgel Refrigerant: 95g / R134a Compressed air supply: 5-8 bar Printer: Star DP8340S Year of manufacture: 08/2002

Condition: used, Lead and feed spindle lathe, manufacturer Böhringer, type D480, with: three-jaw chuck tailstock Multifix tool holder machine light and splash guard Lynette rotating center electric feed Emergency stop, CE compliant, retrofitted. Motor power 11 kW Hodpfxszvyiuo Acgefl Operating voltage 400 V, 50 Hz, 3/N/PE Control voltage 230 V AC, 24 V DC Control cabinet Rittal, protection class IP65.

Condition: not inspected (used), functionality: unexamined, Universal tool milling machine Hodpfxozvyihs Acgefl

Year of construction: 1991, condition: not inspected (used), functionality: unexamined, Robust column drill press, Thyssen Hüller Hille, type UG24 Year of manufacture: 1991 Hfodezvyhdspfx Acgel For industrial use Operating voltage: 380 V, 50 Hz Current consumption: 16 A Operating hours according to the hour meter: approx. 1,678.3 h Complete set of spur gears included.

Condition: used, Year of construction: 1995, functionality: unexamined, IRCO bar feeder, model 4275, for the automatic feeding of bar stock to lathes. Oil-lubricated design. Year of manufacture 1995. Operating voltage 400 V, 50 Hz, connected power 1.5 kW. Sold as shown in the images. Hjdpfx Aszvyfvecgefl

Year of construction: 2021, condition: used, Industrial table scale consisting of a stainless steel weighing platform and a Mettler Toledo weighing terminal IND930 Desk. Technical data Manufacturer: Mettler Toledo Weighing platform Type: PBA757-CC300 Max. capacity: 300 kg Protection rating: IP65 Hfodozvyczopfx Acgel Serial number: may vary Weighing terminal Type: IND930 Desk Protection rating: IP69K Minimum load: 0.25 kg Resolution (e): 0.05 kg Power supply: 100–240 V AC 50/60 Hz Scope of delivery Stainless steel weighing platform Weighing terminal Mettler Toledo IND930 Desk Connection cable Serial numbers may vary; we have 2 units in stock.

Condition: like new (used), functionality: fully functional, Brand: Schäfer Maschinenfabrik GmbH Type: 1102 RTP Year of manufacture: 2023 Fork length: 1150 mm Overall dimensions (L): 2300 mm Overall dimensions (W): 850 mm Hedpfxozvx Ehe Acgefl Overall dimensions (H): 650 mm Load capacity: 2 t

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Hfjdpjzvb I Ejfx Acgjl Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: used, Scharmann Drilling Machine Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Lateral (Z): 1,150 mm Spindle speed: 20 – 6,000 min⁻¹ Table size: 1,200 × 1,400 mm Table load: max. 6 t Without tools and accessories. Disassembly begins after payment is received. Collection in September. Being replaced with a new machine. Hsdpezilmrsfx Acgefl Very important: • The height and weight of the asset must be taken into account when selecting the transport vehicle. • There is no loading dock on site. However, a forklift or an overhead crane is available for loading. • If collection is not carried out on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. • The sale is made excluding any guarantee or warranty. • The information provided consists of the technical data from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, empty load weight: 12,300 kg, maximum load weight: 2,007 kg, DGUV certified until: 04/2027, Year of construction: 1980, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Valid safety inspection certificate until 04/27! TECHNICAL DETAILS Boom: 30 m Hook height: 34.2 m Load capacity at 15 m reach: 2,007 kg Load capacity at 18 m reach: 1,588 kg Load capacity at 21 m reach: 1,300 kg Load capacity at 25 m reach: 1,030 kg Hjdpfjzuzmxex Acgjfl Load capacity at 28 m reach: 881 kg Load capacity at 30 m reach: 860 kg Hoisting rope diameter: 9.07 mm Trolley rope diameter: 6.8 mm Telescoping rope diameter: 12.6 mm MACHINE DETAILS Empty weight: 12,300 kg EQUIPMENT Remote control Safety inspection certificate External reference: 633 The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data is based on the original offer. No liability is accepted for typographical and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, functionality: unexamined, Lease returns Only what is shown in the pictures is included. Further questions cannot be answered. Serial no. N1M1007192 Stock ID 14175774 Hjdpfx Aozu Sidscgofl Approximate transport dimensions: 40x45x15, approx. 6 kg

Condition: not inspected (used), functionality: unexamined, Leased vehicle returned Unfortunately, we cannot answer any further questions. Hfedpfx Acozu Sflogel Serial number: R5A006433 Stock ID: 13840614 Approximate transport dimensions: 55x45x45, approximately 30 kg

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Hfjdpfxozu Avze Acgol Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,600 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Hodpfx Aezuzpajcgefl Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: not inspected (used), Year of construction: 2022, Lease return Including charger Equipped with a pallet or shelf lift, the MiR600 can pick up, transport, and deliver pallets fully automatically within your facility. The MiR600 meets the latest safety standards and is a safe alternative to forklifts. With a payload capacity of up to 600 kg, a speed of 2 m/s, and the ability to maneuver quickly even in confined areas, the MiR600 enables you to significantly optimize your logistics processes. Together with the powerful MiR1350, the MiR600 is the first AMR with IP52 protection on the market. Thanks to its increased resistance to dust particles and water droplets, the MiR600 can also be used in more demanding environments than other AMRs. Serial no. 102003026 Stock ID Hjdpjzu Itxsfx Acgsfl 13948825 Approximate overall dimensions 138x100x118, approx. 341 kg

Condition: not inspected (used), machine/vehicle number: AAC3021001514, No minimum price – guaranteed sale to the highest bidder! For sale is a digital color laser printing machine from Konica Minolta, model AccurioPress C3070. TECHNICAL DETAILS Manufacturer/Model: Konica Minolta AccurioPress C3070 Equipment Class: Digital Color Printing System / Production Printing System Serial Number: AAC3021001514 Printing Technology: Color Laser Maximum Format: DIN A3 Page Counter: 1,184,396 pages Network: Yes WLAN: Yes Duplex Printing: No MACHINE DETAILS The machine is offered expressly in an untested condition. A function test is not currently possible due to the missing hard drives or SSDs. This also applies to the printer controller. Therefore, the technical functionality of the main unit and the accessory components could not be confirmed. Hard Drives / SSDs: Missing Function Test: Not possible Technical Condition of Main Unit: Untested Technical Condition of Accessories: Untested Cosmetic Condition of Main Unit: Moderate signs of wear in the upper and front area Paper tray drawer: Opening or handle torn off Cosmetic Condition of PF-602: Moderate signs of wear in the upper and front area EQUIPMENT Konica Minolta AccurioPress C3070 Printer Controller Serial Number: A00043842 Finisher FS-532 Serial Number: 75710 Hjdpszu Arisfx Acgjfl Paper Feeder PF-602 Serial Number: 75711 Booklet/Finishing Unit SD-506 Serial Number: 75712 RU-518 Serial Number: 75713 Please note the following: The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made excluding any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: not inspected (used), machine/vehicle number: 698501644, No minimum price – guaranteed sale to the highest bidder! For sale is a Canon varioPrint 115 printing system with extensive accessories. The system uses monochrome laser printing technology and supports the DIN A3 format. TECHNICAL DETAILS Manufacturer/Model: Canon varioPrint 115 Equipment Class: Production printing system / printing line Serial Number: 698501644 Printing Technology: Monochrome laser printing Maximum Format: DIN A3 Page Counter: 3,889,839 pages Network: Yes WLAN: Yes Duplex Function: No MACHINE DETAILS The main unit is offered without a hard drive or SSD. The existing data storage medium has been destroyed and recycled. According to the technical report, the printer cartridge is almost empty. The technical condition of the main unit should be checked before commissioning. Hard Drive / SSD: Not available Hfedpfx Ajzu Aliscgel Existing Storage Medium: Destroyed and recycled Printer Cartridge: Almost empty Technical Condition of Main Unit: To be checked before commissioning Accessory Components: Not technically tested / untested EQUIPMENT Canon Paper Folding Unit-J1 (F281270) Serial Number: 75718 Oce 01051 Serial Number: 75721 Canon Staple Finisher-W1 (F710700) Serial Number: 75722 Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made excluding any warranty or guarantee. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on site before the end of the auction.

Condition: not inspected (used), machine/vehicle number: XMS00835, No minimum price – guaranteed sale to the highest bidder! For sale is a Canon imagePRESS C850 with extensive accessories and a controller system. This machine is suitable for professional production and color printing in formats up to DIN A3. TECHNICAL DETAILS Manufacturer/Model: Canon imagePRESS C850 Device Class: Copier / Production Printing System Serial Number: XMS00835 Printing Technology: Color Laser Maximum Format: DIN A3 Page Counter: 5,283,148 pages Network: Yes WLAN: Yes Duplex Printing: No Condition: Used Controller System Model: CONTROLLER_T42 Serial Number: 1711072031 Housing: Tower Housing Hard Drive: 500 GB Operating System: Not installed EQUIPMENT Canon imagePRESS C850 Controller System CONTROLLER_T42 Tower Housing 500 GB Hard Drive Booklet Trimmer-F1, Item Number F713900 Document Insertion Unit N1, Item Number F281260 SSD Bridge, Serial Number 75724 SSD Square Fold Module SFM 7714, Serial Number 75723 Paper Deck-C1, Item Number F281030 Booklet Finisher-W1 PRO, Item Number F710700 The printing machine and accessories are offered without technical inspection. A functional test of the individual components could not be carried out. The data storage device of the printing machine has been destroyed and recycled. HDD/SSD of the printing machine is missing. The toner or printer cartridge is almost empty. The controller system does not have an installed operating system. The accessory components are explicitly sold as untested. Please note the following: The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty and guarantee. Hfedpszu Adfsfx Acgel The information on the technical data comes from the original offer. No guarantee is given for typing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.