Second-hand machinery for sale (278)

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition piece - new Sold at a special price Technical data 300-P intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph Gjdpfx Aecdrzdjayskf voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: ex stock Bitburg Subject to prior sale

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc Gksdpfx Asgd Si Eoayjf [...]

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Gksdpfx Aasxgbwzeyof Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, pressing force: 90 t, cylinder diameter: 85 mm, stroke length: 350 mm, number of cylinders: 6, TECHNICAL DETAILS Electric heating plates: 3,000 x 1,300 mm Number of heating plates: 2 pcs. Total pressing force: 90 t Cylinder stroke: 350 mm Number of levels: 1 pc. Level opening: 350 mm Press cylinders: 6 pcs. Diameter of press cylinders: 85 mm MACHINE DETAILS Working temperature: 90°C Gsdpexnyqpefx Aayekf Max. temperature: 120°C Electrical data Operating voltage: 400 V/50 Hz Connected load: 22 kW Heating capacity: 22 kW Power requirement hydraulic unit: 3 kW EQUIPMENT Movement of the press table via rack-and-pinion and parallel guides Electronic control unit with touchscreen Digital timer for setting pressing time Digital input and monitoring of pressing pressure Digital diagnostics and fault message display Safety circuit with two-hand operation Safety pull-cord Safety support for lower press table EFC electronic flatness control Gold anodized heating plates (Busse) Note: Dismantling and loading can be offered for approx. €1,200 net.

Condition: good (used), Year of construction: 2007, Used Al-ko clean air dust extractor, Gedpfx Aaew Aptloyekf Intake nozzle: 160 mm Motor rated power: 2.2 kW / 3-phase Voltage: 400 V / 50 Hz Nominal air volume flow: 1850 m³/h Negative pressure: 2120 Pa Filter area: 9 m² Filter material: Category "C" - BIA certificate - electrically conductive - washable - H3 < 0.1 mg/m³ Filter cleaning: compressed air Max. sound pressure level: 69.4 dB Chip collection volume: 280 litres Dimensions (L/W/H) in mm: 1600 x 830 x 1850 Weight: 288 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2022, Kaeser screw compressor SM 13 - 11 bar exhibition piece at a special price Volume flow at 11.0 bar (g) 1.07 m³/min Electrical power consumption of the entire system at 11.0 bar (g) 9.63 kW Specific power 9.00 kW/(m³/min) Maximum overpressure 11.0 bar Drive motor efficiency at full load 91.7% Drive motor efficiency class IE4 Nominal drive motor power 7.5 kW Gkedpevk R A Sofx Aayef Drive motor speed 2955 rpm Drive motor protection class IP 55 Electrical supply 400 V / 3 Ph / 50 Hz Compressed air outlet temperature above ambient temperature (at +20°C, 30% relative humidity) 8 K Sound pressure level 65 dB(A Compressed air connection G 3/4 Location: From stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Gjdpfx Aajvk Scgoyekf Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Low hours – previously used in a school Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Gedpfx Ajw D Hmljayskf Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system - Centralized lubrication - Lighting - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Gedpsxdtkuefx Aayekf Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Extremely low hours of use –

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice Gkjdpexdttpefx Aayef

Condition: new, Year of construction: 2024, Solid, self-supporting, firmly welded, torsion-resistant saw frame Sturdy, durable saw-bar steel construction Robust bearing of the motor carriage ensures high cutting precision Powerful, low-vibration 3.9 kW (5.3 hp) motor TRK dust extraction system Automatically deflecting aluminum slatted frame with plastic supports Device for wall mounting ball bearing support rollers divided center support at optimal working height, with aluminum grids integrated small parts support made of wood Supersilent sound insulation for the reduction of saw blade noise Electromagnetic motor brake Weight of the saw approx. 910 kg Cutting depth 60 mm Saw motor power 3,9 kW (5,3 PS) saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 exhaust ports ø 100 mm Connected load 4,8 kW Mains connection 3 x 400 V / 50 Hz cutting range: L: 4600 ; Hvertical: 2200 mm , Hhorizontal: 2100 mm Gkjdpfoihahbex Aayof Equipment: - Compact 5220 - Scorer VSA stepless - Strip stop - Mech. braked support rollers - Free standing support compl. Location: Ex stock 54634 Bitburg - immediately available - Photo shows optional digital display, which is not in the on offer.

Condition: new, Year of construction: 2025, Technical data: Suction capacity 510 l/min. Filling capacity 400 l/min. Maximum pressure 10 bar Tank capacity 90 l Cylinder/stages 2/1 Speed 1.300 min/1 Motor power 3 kW/ 400 V Description: Gsdpfx Aohk Dfkoayokf The universal with V-belt drive and qualitative equipment especially suitable for craftsmen for use where compressed air quality, durability and efficiency are essential long life thanks to high performance low speed units safe transport and excellent stability thanks to large wheels with parking brake Optimum cooling thanks to large fan impeller aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air better efficiency due to optimised aggregates Standard with: Condor pressure switch Pressure gauge Pressure reducer with water separator and Rectus quick coupling Motor with overload protection Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit Godpfxshk S Sze Aayjkf without suction hose

Condition: new, Year of construction: 2025, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Gksdpfxsi Amnpe Aayef Location: Ex works - available at short notice -

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Godpfx Aaeu I R Utsyokf Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: excellent (used), Year of construction: 1982, with 2 drilling beams Used, good condition Make Scheer Type DB 3 Gsdev Trlmepfx Aayskf Year of construction 1982 Machine no. 73021 Number of spindles: 25 Number of drill beams: 2 Spindle spacing/grid: 32 mm Drilling from above Hydraulic feed brakes: 2 Linear stop: 1 approx. 2500 mm Working width: approx. 800 mm (768 mm) Drilling depth: approx. 100 mm stroke Drill chuck: M 10 Pendulum stops: 3 Clamps: 3 Drill programs: 4 Space required: approx. 1400 mm x 1300 mm x 1800 mm Weight: approx. 1000 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - free on freight - Handed over in the current condition, as seen, without overhaul, without warranty or guarantee

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant Gjdpfsr Eli Tex Aayokf GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Second-hand wood lathe, Killinger KM 1000 S - Very good condition - Motor 0.75 kW / 230 V Center width 1000 mm and center height above the bench bed 200 mm Accessories: Gkoder Eltcopfx Aayjf - Center punch - Turning iron (see photos) - steady rest - face plate - Tailstock - Hand rest - 8 speeds Location: From stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Gsdpfolht Htex Aayokf Maximum equipment for the professional. Part number 5503431 Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Gkedpslht H Eefx Aayjf Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2024, The Uniq series is the full-fledged basis of our range and shares all the features that have helped the Kündig edge sanding machine gain its reputation on the market as a robust, versatile precision instrument. Part of its extremely solid construction is the motorized oscillating sanding unit, which offers a maximum oscillation travel of 90mm and the possibility of motorized tilting by up to 45°. All the usual edge processing operations can be carried out at the up to four grinding stations. Gsdpfofig Rwox Aayekf Edge sanding machine Kündig Uniq front and rear side Ingenious design - the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a whole range of intelligent functions and features. For example, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation travel, sanding belts can be used optimally over their entire width, without the need for laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The sanding unit can also be tilted conveniently by means of a rotary switch and also with the aid of a separate motor. The unit can be tilted between 90° and 45°. Thanks to the sophisticated swivel mechanism

Year of construction: 2025, condition: new, Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Gkjdpfjd Ecc Tsx Aayof Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Becker Vakkumpumpe / oil free / tank capacity 100 l Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: as good as new (ex-display), Year of construction: 2025, OPTIdrill D 26PRO - Column drilling machine Table and column drilling machine with V-belt drive User-friendly safety switch in accordance with IP 54 with undervoltage release and separate emergency stop switch 400 volt models with right/left rotation Drilling depth stop Precisely machined drilling table with diagonal T-slots Height adjustment of the drilling table via rack Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Aluminum die-cast spindle lever made from one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electronics in 24 V direct current Godpfxsdqzbno Aayekf Guaranteed concentricity

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Gedpfjdqzcxsx Aayjkf Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Gksdpfxshp Rdlo Aaysf Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K