Used lathes for sale (25)

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 305 mm, turning diameter: 210 mm, spindle bore: 56 mm, spindle speed (max.): 25 rpm, spindle speed (min.): 5,000 rpm, Revolver lathe with 12 stations (non-powered) Tool holder: MK 3 Chip conveyor Bar feed tube: IRCO DS 34.8 (year of manufacture 2013) Dimensions (L x W x H): - Machine: 4000 x 1700 x 1700 mm - Bar feed tube: 5500 x 1300 x 1500 mm Total weight: approx. 4,000 kg Hnodpfezl Ei Sjx Apnop

Condition: good (used), Year of construction: 2000, center width: 2,000 mm, Control system: SIEMENS 840 D (manual turning) Spindle module replaced in 2008. Swinging diameter over the bed: 630 mm Swinging diameter over the carriage: 370 mm Hnsdpfx Apsy A I I Ienop Spindle bore: 105 mm Distance between centers: 2,000 mm The machine is supplied with a 250 mm manual chuck. Spindle speed range 1: 4 - 430 rpm Spindle speed range 2: 430 - 2500 rpm Power of the main motor: 18.5 kW S6-40%

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,000 mm, quill diameter: 75 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 9 rpm, quill mount: MK 5, Equipment: rotational speed infinitely variable, incl. RÖHM lathe chuck incl. 3-axis position display incl. quick-change tool holder 'Set', Multifix system for further information, see data sheet ELMAG warranty: 3 years (with online registration after purchase) NOT THE RIGHT MACHINE? We are official ELMAG partners and can offer you the entire range of ELMAG products! Request a quote! Hnodpfx Aoy Izauspnjp

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 178 mm, turning diameter over bed slide: 300 mm, center height: 178 mm, center width: 914 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,700 mm, total width: 750 mm, total height: 1,270 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, quill mount: MK 3, incl. 3-axis position display incl. RÖHM lathe chuck incl. quick-change toolholder 'set', Multifix system for further details see data sheet ELMAG warranty: 3 years (upon online registration after purchase) Delivery throughout Germany: FREE OF CHARGE Hnedpoy Iy H Hjfx Apnsp NOT THE RIGHT MACHINE? WE ARE AN ELMAG AUTHORIZED PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE ELMAG RANGE! REQUEST A QUOTE!

Condition: good (used), Year of construction: 1995, - Max. turning diameter: 160 mm Hnjdpfszidcrjx Apnsp - Max. bar diameter: 65 mm - 2 x tool slides, travel 70 mm - 2 x cross slides, travel 70 mm - 8-position turret, non-powered - Max. main spindle speed: 7,500 rpm - Chip conveyor Accessories - Bar feeder IEMCA TAL 65/32 Dimensions (L x W x H): - Machine with chip conveyor: 4200 x 1385 x 1800 mm - Bar feeder: 4000 x 800 x 1400 mm Total weight: 6,500 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, Control: Siemens 840D Spindle bore: 65 mm Speed: 4,000 rpm Tool holder: VDI 30 Main and counter spindle with C axis Hnodpfxjy Rr U Us Apnep TOOL CARRIER I (XZ) Technology: Cross slide (3x) Travel: X= 70, Z= 115 mm Tool Carrier II (X/Z) Turret with 7 stations and subspindle All stations driven (3,000 rpm) Travel: X= 160, Z= 450 mm Tool Carrier III Turret with 8 stations Travel: X= 150, Z= 200 mm Tool Carrier IV (rear side) Turret with 8 stations 3 tool holders for rear side EQUIPMENT - Chip conveyor - Bar feeder IEMCA MASTER 80/33 HF

Condition: good (used), Year of construction: 1999, - Control system: Heidenhain CNC Pilot 3190/4290 - Turn-Plus software update - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-station turret, no driven tools Hnedpfx Aszggahspnep - Tool holder VDI 30 - Tailstock - Chip conveyor

Condition: good (used), Year of construction: 2002, Control: FANUC 18i-T Turning diameter: 32 mm Turning length: 120 mm Hjdozgdk Dopfx Apnenp Max. main spindle speed: 8,000 rpm Max. counter spindle speed: 8,000 rpm SLIDE 1 X-axis travel 1: 65 mm Y-axis travel 1: 350 mm Tool positions 6 / 4 Fixed stations 6 Driven stations 4 SLIDE 2 X-axis travel 2: 265 mm Z-axis travel 2: 320 mm Tool positions 2 / 3 Fixed stations 2 Driven stations 3 SLIDE Y2 Tool positions 3 / 2 / 2 External machining 3 Internal machining 2 Driven stations 2 Weight: 4,500 kg Bar loader: IEMCA BOSS

Condition: good (used), Year of construction: 2003, functionality: fully functional, Bored to Ø 36 mm 6 spindles KADIGO tool monitoring system with IEMCA PRA 52/42 F bar loader (4m bars) Accessories Hnsdpjzdttisfx Apnop

Condition: good (used), Year of construction: 2001, functionality: fully functional, 6 spindles KADIGO tool monitoring system with IEMCA PRA 52/42 F bar feeder (4m bar length) Accessories Hsdpozdtn Tefx Apnenp

Condition: good (used), Year of construction: 2006, turning length: 305 mm, turning diameter: 320 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, rotational speed (max.): 5,000 rpm, quill diameter: 65 mm, quill stroke: 80 mm, bar passage: 51 mm, FANUC i Series control system Hodey S U Dhjpfx Apnsnp Turret with 12 stations (non-driven) Tailstock Chip conveyor Bar feeder IEMCA BOSS 545/32 E

Condition: good (used), Year of construction: 1965, functionality: fully functional, Turning length/centre distance: 4m, spindle bore diameter, faceplate D 1000 mm, centre height over carriage 360 mm, 2 steady rests with roller jaw guides retrofitted in 1980, main spindle speed 215 - 355 rpm. Operating manual with wiring diagram, chip guard, quick-change toolholder, carriages recently overhauled, electric control box, weight approx. 15 t. Inspection possible under power, including test run. Hnjdpfx Apey Ehntonjp

Condition: good (used), Year of construction: 1966, functionality: fully functional, Digital measuring device Centre height: 150 mm Swing over bed: 300 mm Turning diameter in the gap with face plate: 405 mm Distance between centres: 1000 mm 3-jaw chuck, with chip guard Multiflex toolholder Spindle speeds: 33 - 2000 rpm Chip tray Tailstock quill diameter: 45 mm, quill travel: 100 mm Taper: MK 3 Machine dimensions: 2500 x 800 mm Hnedpjx Eah Asfx Apnep Weight: 1180 kg Operating manual

Condition: good (used), Year of construction: 2004, Number of spindles: 8 Max. bar feed in one station: 130 mm Max. bar feed in two stations: 260 mm Max. stroke of radial slide: 52 mm Adjustment of radial slide: ±12 mm Max. stroke of axial slide: 72 mm Max. stroke of tool spindles: 106 mm Hnodpow Rfcdefx Apnjp Adjustment of tool spindles: ±10 mm Main spindle speed: 500 - 4,000 rpm Cycle time per part: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg

Condition: good (used), Year of construction: 2001, max. bar diameter: 42 mm Hnjdpfxjyxpzhe Apnjp max. speed: 4,500 rpm turret with 8 stations of which 4 are driven travel X = 110, Y = 50 mm 2nd turret with 8 stations of which 4 are driven speed of driven tools: 6,000 rpm 1 longitudinal slide 1 vertical slide pick-off spindle chip conveyor bar feeder IEMCA BOSS 545 weight 4,100 kg

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered Hnjdpfx Asxa Epbepnsp - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: excellent (used), Image 01 Hnodpfjyttz Tjx Apnop Angle-driven tool holder Capto C5 Type 0.5.941.204 € 1,350 Image 02 Driven tool holder Capto C5 Type 0.5.941.104 - 102 181 € 850 Image 03 Angle-driven drill holder Capto C5 Type 0.5.941.204 - 137 533 € 1,950

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Hnsdpfxoyn Imyj Apnsp Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,700 h, functionality: fully functional, travel distance X-axis: 165 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, controller model: SIEMENS 840 D, Equipment: chip conveyor, TECHNICAL DETAILS X1 travel: 165 mm Z1 travel: 220 mm X2 travel: 165 mm Z2 travel: 150 mm X3 travel: 165 mm Z3 travel: 650 mm Y3 travel: 80 (+50/-30) mm Bar capacity: 65 mm Main and sub-spindle speed: 5,000 rpm Turrets: 3, each with 12 stations (all driven) Driven tool speed: 4,000 rpm Tool holder: VDI 30 with drive, DIN 5480 MACHINE DETAILS Control: SIEMENS 840 D Operating hours Power-on hours: 52,511 h Spindle hours: 32,700 h EQUIPMENT C-axis Y-axis Coolant system Hnedpfx Apjymmdbjnep Chip conveyor Bar feeder TOP Automazioni XF 375

Condition: good (used), Year of construction: 1992, functionality: fully functional, Spindle bore: 42 mm Swing over bed: 330 mm Hsdpfx Apsykahzjnonp Multifix tool holder Tailstock with MK3 taper Speed: 1-4500 rpm

Condition: repair required (used), Year of construction: 1989, 6 spindles Thread cutting Cross drilling Thread rolling Milling attachment Many accessories Feed motor (curves) defective! Hedpov R Uqtofx Apnjnp with IEMCA PRA 40/32 P bar loader

Condition: good (used), Year of construction: 1999, max. turning diameter 500 mm max. turning length 1400 mm turret with 12 stations Hnjdovi Rcpopfx Apnjp not driven

Condition: good (used), Year of construction: 2007, 3-part system: 3 tools engaged simultaneously 12 axes 4-way cross machining up to 35 tools (26 driven) System 1: 6 turning tool holders 12 x 12 mm or 5 x 16 x 16 mm, 4 driven cross tools System 2: Y2-axis at the rear (3 fixed + 6 driven tools) System 3: 2 x 8-station turret with up to 16 driven tools C-axis on main spindle + 5° mechanical indexing C-axis on subspindle + 5° mechanical indexing C-axis on turret + freely programmable angle setting Hjdjw In Anepfx Apnonp Bar feeder FMB turbo 5-42, 3200

Condition: good (used), Year of construction: 2008, F2 Series 4-station system: 4 tools engaged simultaneously 15 axes System 1: 5 tool holders 12 x 12 mm System 2: 8 driven tools (turret system 4) System 3: 16 tools (up to 16 driven) System 4: 8 driven tools (turret system 4) C-axis on main spindle + 5° mechanical indexing C-axis on sub spindle + 5° mechanical indexing up to 37 tools (32 driven) Hnodpfx Apjw Iny Tsnjp Bar feeder FMB turbo 5-42, 3200

Condition: good (used), Multi-spindle lathe (6 spindles) max. bar diameter 16 mm Hedpfx Apep Dux Tjnenp guide tubes 4,000 mm chip conveyor