Used Woodworking machinery for sale (243)

Year of construction: 2014, Condition: excellent (used), Axle 920 mm x-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A - axis 360 degrees Minimum dimension: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4 position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in X - direction Max. bottom depth with saw blade: 10 mm Motor 0,75 PS , 400 Volt Required extraction capacity: 2300 m3/h Location: comes to warehouse 54634 Bitburg Dsb Hn Tpjfmdcqjpsut - immediately available -

Condition: new, Year of construction: 2025, Glue spreading machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) working width: 1.300 mm max. passage height: 100 mm speed: 18 m/min working height: 900 mm diameter of application rollers: 185 mm connected load: 0,5 Hp 0,37 KW operating side: right Electricity: 400 V/ 50 Hz/ 3 phases Technical equipment: - Structure of the glue spreader made of welded sheet metal. - 1 motor for driving the two rollers - Glue spreader rollers covered with acid-resistant special rubber, form-ground and grooved, wear-resistant. - The thickness of the rubber layer can be shape ground several times. - Special dampers on the roller supports, which allow automatic opening of the rollers to compensate for unevenness up to max. 5 mm on the workpieces. - Glue dosage by means of zinc sheet distribution tray. Easily extractable for cleaning. - 1 handwheel to adjust the opening of the rollers. - Accident prevention protection of the rollers - Electrical components according to the highest Djb Hnod Iz Dfj Tppeut quality standard - CE standard

Year of construction: 2025, Condition: new, Vacuum lifters BARBARIC swiveling, including hoists, equipment package consisting of: -Vacuum lifters of uniWood B3-90 degrees - 250 comfort version, with integrated chain hoist increased load capacity: 250 kg Suitable for the vertical and horizontal transport of flat standard plates. Vacuum generation is pneumatically by means of ejector. For lifting of permeable materials (MDF of 8 mm thick), which is Reinforced Vakkumpumpe installed. -Technical data- Chain hoist lifting speed: 0-10 m / min stepless by frequency converter Lifting height (operating range): 2.0 m Length of chain: approx. 3.5 m operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: ca. 85 kg -Security system - the lift is equipped with a vacuum gauge. Release the load by means of 2 buttons -Hoists BARBARIC Load capacity 250 kg to the hoist Consisting of: Column, console and smooth-running boom. Delivery including Schiebefahrwerk and energy supply. Height: approx. 4, 2 m Bottom bracket: approx. 3.5 m Throat depth: 5 m Dujb Hn Tpsc Umftjpjt Swivelling area approx. 250° Panning and cross travel by hand Base plate with 700 x 700 mm and mounting material. Supplied with adhesive anchors for concrete floor. This fixture requires a similarly proven concrete floor. The static verification of soil is on site to do and accordingly to document. Others

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and carpenters The extra long dressing tables in one piece allow easy dressing of the workpieces Worktables are made of grey cast iron, therefore insensitive and permanently flat Backward opening dressing tables with tension spring support for fast and convenient changeover Thanks to the permanently mounted suction hood, it is not necessary to change the suction hose during changeover, which saves valuable working time Helical toothed steel infeed roller ensures constant and even wood infeed Rubber pull-out roller in the thickness outlet ensures even wood pull-out Material feed with four speeds Planer thickness table adjustment via handwheel with integrated display for planing height DIGITAL version: with electrical thicknessing table height adjustment and digital display On and off switch in operator position Powerful industrial motor The high machine weight ensures highest precision and smooth running. Preparation for long hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm width/depth approx. 1370 mm Weight approx. 695 kg Dresser Total length of the tables 2250 mm Chip removal max. 5 mm Stop length 1200 mm Debsff Hdpo Hn Tppsut Fence height 150 mm Dust extraction connection Suction nozzle diameter Thickness 1 x 120 mm Drive power Main engine 7 kW Installation information Space requirement Length 2250 mm Space requirement width/depth 1440 mm Explanation Place [...]

Condition: as good as new (ex-display), Year of construction: 2025, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm Djb Hecnwyden Tppout speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, " Products " Woodworking " Holzkraft " Sizing circular saws Series SC 3 classic - Small size circular saws Cutting plane directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable Extendable aluminum telescopic fence, angle adjustable with professional stop flaps Rip fence with quick clamping and fine adjustment The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron remains permanently flat Heavy steel cast iron construction Quiet running and precise cuts Equipped with powerful three-phase motor Maximum cutting height is achieved even with pre-scoring device installed (pre-scoring device optional) Scope of delivery: Table extension and table extension Anodized aluminum format sliding carriage Aluminum folding fence Rip fence with round bar guide and fine adjustment Model SC 3 classic 26 Article no. 5504326VR Technical data table dimensions 840 x 560 mm table height 900 mm trim length 2600 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 82 mm max. clearance width to the left of the saw blade 2310 mm cutting width with rip fence 900 mm inclination of saw blade 90 - 45 ° saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm scoring saw blade Ø (option) 80 mm 4000 min-1 Main saw blade speed 4000 min-1 Speed scoring saw blade 8000 min-1 Electrical connection 400 V / 50 Hz Motor power 5,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Dsb Hocnxapjn Tppout Weight 380 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm Deb Hecnxa Nsn Tppout cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: as good as new (ex-display), Year of construction: 2025, The captivating advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working climate due to diagonal low-turbulence air flow. Large airflow window due to air baffles - therefore also suitable for larger workpieces. Separation efficiency of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² - therefore long filter life! Easy and quick filter change on the front side. Inexpensive replacement filters. Low purchase costs and extremely low energy consumption. Dry splashboard made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fibre filter as after-filter unit. Ex-fan incl. throttle valve mounted on the left. Do not compromise on the quality of the surface. Easy Paint extraction walls are the ideal cost-effective solution for effective collection and filtering of paint mist and extraction of solvent vapours. Robust and powerful but economical in consumption. The IPE double filtration system provides two filter stages for a maximum separation efficiency of up to 99 %. The cardboard labyrinth filter initially absorbs considerably more overspray (up to 18 kg/m² filter surface) than conventional filter mats due to the folded filter pockets. The downstream glass fibre secondary filter absorbs only the finest residual particles. As a guide value, the cardboard labyrinth filter, depending on Djb Hocnz Iqsn Tppout

Condition: new, Year of construction: 2025, crosscut and mitre circular saw with maximum cutting height of 170 mm solid cast iron construction precise ball-bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 65° horizontal readjustable fixed stops lower saw blade protection connectable to suction unit Modell-----Motor-----Drehzahl-----Schnittlaenge Duob Hn Tpscnz N Hopst ZS 170: 400 V / 2,0 KW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Horizontal mitre range ZS 170 ----- 170 mm----- 45 degrees -90 degrees Modell----- Saegeblatt-----Absaugstutzen-----Gewicht ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories on request: Roller conveyor / length gantries type RO, RL, RLK, RLH and RLHK for machining aluminium and PVC profiles and for wood profile board machining. the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with min. 2 support feet 3 m type RLK: roller conveyor length stop with backwards folding stop slide - machine stand - Main switch lockable - Feed roller conveyor Ro-St60 3 meter right side - roller conveyor RLK-ST60 L 3,0 meter measuring length Length stop/roller conveyor heavy version mm - scale at the rear beam, caliper gauge with magnifying glass and stop flap - Saw blade 420 x 3,5 x 40 Z 84 Neg Location: ex stock 54634 Bitburg - free on truck - - immediately available- Location: Ex stock 54634 Bitburg - free on truck - - immediately available-

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg Dsb Hn Tpscqvhwspeut - available immediately -

Condition: new, Year of construction: 2025, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg Duobek H Ic Uo Hn Tppst - immediately available - Picture: similar. Machine is still in original packaging

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. Dujb Hn Tpelht Hzepet F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2025, Rojek sliding table saw PF 350 industry - execution The machine design has many technical innovations that increase useful utility properties of this machine. The high quality workmanship makes this sliding table saw the best in its class. The machine is standardly equipped with aluminum sliding table CV 360T with very precise and firm fixing on hardened bars. The machine can be equipped with an aluminum sliding table of multi-chamber, very rigid construction CV 400T, precise and rigid version with steel bar fixing. Aluminum sliding table size 400 x 3200mm. The precision and reliability are guaranteed by massive swivel segment guide of the saw mechanism in the robust cast iron body and scoring unit with separate motor. TECHNICAL SPECIFICATIONS Dsb Hn Ton D Arhjppjut Saw Motor power S6 40% 7,5 kW/3×400 V Motor speed 2 870/min Max. Saw blade diameter with scoring Ø 350 mm Spindle diameter 30 mm (1″) Saw blade spindle speed 4 450/min. Max. Cutting height 120 (83 [45°]), Saw blade tilting 0° ÷ 45°. Max. Cutting width 1 300 mm Scoring unit Motor power of scoring unit 0,75 kW (1 Kw) Saw blade diameter Ø 120 mm (100 mm) Spindle diameter Ø 20 mm Speed of rotation 8 530/min Machine dimensions length 3 355 mm width 3 450 mm Table height 892 mm Max. Machine height 1 460 mm Table size 1 185 x 500 mm Suction pipe diameter 100 + 100 mm Gross weight 680 kg Net weight 675 kg Aluminum sliding table CV360T table size 3 200 x 360 mm Support frame size 1 240 x 650 mm cutting length 3 200 mm Power line fuse 16 A (25 A) Noise level (without technology) 81,8 dB(A) Noise level (with technology) 85,3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, Panhans band saw BSB 500 upper and lower APA II bandsaw guiding system swivelling table top up to 45 door safety by limit switch wheel diameter 500 mm drive motor 1,5 kW / 2,0 PS motor 400 Volt with motor brake belt speed 1.290 m/min. cutting height max. 320 mm cutting width max. 485 mm blade length max. 4.145 mm table size 500x680 mm table height 890 mm Suction nozzle 2x100mm space requirement: 900x525x1925 mm Weight 220 kg CE-conform, GS-tested Deb Hjdq D I Hjn Tppsut ex stock 54634 Bitburg

Year of construction: 1988, Condition: used, machine/vehicle number: 01910/88, Floor grinding machine Eugen Laegler Type: Vibrafor Engine power: 1,1 KW Volt: 220 Grinding surface vibrating Dust bag Dusb Hn Tpjcb Au Sepst Location: 54634 Bitburg - can be visited

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition piece - new Sold at a special price Technical data 300-P Dob Hnecdrzdj Tppeut intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2280 Pa filter surface: 30 m² Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Location: ex stock Bitburg Subject to prior sale

Condition: excellent (used), Year of construction: 2018, Weima shredder WLK 800/37 kW Year 2018 Technical specification: Hopper clearance: 800 x 1,450 mm Cutting chamber dimensions: 720 x 700 mm Hopper capacity: approx. 0.8 m3 Working width of the rotor: 800 mm Rotor diameter: 260 mm Pusher path with segment floor: 700 mm Drive power: 37 kW Rotor speed: 100 rpm Dujbst Ix Iyo Hn Tppet Number of blades (2-row): 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 40 mm with secondary crusher bars Paint finish: Weima standard RAL 2002 / 7016 Connected load: 400 V +/- 5 % / 50 Hz including: V-rotor with knife pockets milled into the profile Two rows of blades on V-rotor Welded blade carriers and screwed blades with countersunk blade screws Super Cut (adjustable counter blade) for regulating the cutting gap Reversible counter blade K-bearing, offset, closed, low-maintenance self-aligning ball bearings Fast hydraulics for pusher backwards with various adjustment options Shock valve sits directly on the slider cylinder Slide chamber unpainted Switch cabinet (Rittal) with 5 m cable SPS control / Siemens Cardanically suspended pusher cylinder with load-dependent controlled drawer Machine frame on rubber suspension elements Segmented floor on 2 sides Safety package Gear limit switch and reversing counter Electromechanical drive with Weima WAP gearbox Manually swiveling screen basket Quick access screen (door) Gearbox oil cooling prepared Hydraulics fast forward Heavy duty" feed hopper Hydraulic oil preheating Hydraulic oil cooling Plug for conveyor belt + electrical integration Conveyor belt cut-out 600 mm Imro Maschinenbau Used discharge conveyor belt with 1.1 kW Type: 500 x 1200 / 4900 Year 2015 Machine number: 510-2770 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s Deb Hn Tpsqlckpspeut - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1982, Planing width 500 mm 2-knife cutter block Planing height: 230 mm Steel feed roller, grooved Rubber feed roller Dobjv Trmwe Hn Tppsut 2 idler rollers in the table Motor 5.5 kW Measurement scale for height adjustment via handwheel 2 feed speeds Weight approx. 900 kg Location: Arrives end of April, Lage 54634 Bitburg - Delivery as is - free on freight - No warranty - no guarantee -

Condition: excellent (used), Year of construction: 1990, Kölle Sizing Edge Milling Machine with Belt Feed Type: FKF For plastic panels, varnished panels, and solid wood For milling, jointing, flush trimming, and trimming improperly bonded edges This machine produces chip-free edges. Table length: 3000 mm Table height: 620 mm Milling width: 45 mm Dusb Hn Tpsv Trunspet Max. chip removal: 4 mm Milling speed: 8000 rpm Milling motor: 2 HP Feed speed: 11 m/min Feed motor: 0.5 HP Chip extraction nozzle: Diameter: 100 mm Required space: 3000 x 450 mm Net weight: 400 kg Location: Arrives at the end of April at our warehouse in 54634 Bitburg - Delivery as is - no warranty - - Free shipping -

Condition: excellent (used), Used, good condition Dsbjv T R Tve Hn Tppeut Make: Kuper Type: FWJ 900 Machine No. 26118174 Projection: 900 mm Thread Heating: Air Space requirement: approx. 1400 mm x 600 mm x 1600 mm Weight: approx. 350 kg Location: Arrives at the end of April at warehouse 54634 Bitburg - Free shipping, unpacked Handed over in the current condition, as seen, without warranty or guarantee

Condition: not inspected (used), Year of construction: 2009, Wide Belt Sander Format4 Finish1302 Year of manufacture 2009 Touch display Sanding height approx. 3 - 170 mm Sanding width approx. 1300 mm 2 sanding units (individually controllable) Air cushion Program storage possible 22 kW motors (2 motors - separate for each belt!) Weight approx. 2.3 tons Only solid wood or veneer was sanded - no painted surfaces or anything else! Instruction manual and key included! Shipping available upon request for an additional charge! Machine can be inspected! By appointment! Location: ex warehouse, 54634 Bitburg - available immediately - Dusbewdpldj Hn Tppst Sold without warranty - without guarantee - free shipping -

Condition: excellent (used), Year of construction: 1966, BÄUERLE AS 51 - Top Condition - Heavy-Duty Surface Planer Machine No.: 661571 Planing Width 510 mm Table Length 2,640 mm Planer Shaft and Strip Planer Knives Main Motor 4 HP Extraction Port Deb Hn Tpowab N Tepjut Planer Knives Guard Machine is in top condition From Location: 54634 Bitburg - Available immediately - Subject to prior sale

Condition: excellent (used), Year of construction: 1995, Used Brand Bütfering Type AWS-1100 Machine in excellent condition - carpet in very good condition - Year of manufacture 1991 Machine No. 2127547 Working width approx. 1100 mm Passage height approx. 160 mm Number of units: 1 unit Belt dimensions 1900 mm x 1120 mm Extraction connection Space required approx. 1700 mm x 2100 mm x 2100 mm Weight approx. 2200 kg Duob Hn Tpev Tfykepst Storage location: Warehouse 54634 Bitburg, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty Available end of April 2025

Condition: excellent (used), Year of construction: 2018, Holzkraft LLB 16 H - Long hole drilling machine The long hole drilling machine with swiveling drilling support. Large-dimensioned work tables of the long hole drilling machine are made of gray cast iron, making them robust and permanently flat Drill support is mounted on hardened prism guides with ball contact system Wescott drill chuck as standard Dowel device with grid division can be retrofitted at any time Robust steel/gray cast iron construction For both clockwise and counterclockwise use Dowel device - zero position in the middle of the grid bar of the dowel device Accessories: Long hole drill set 5-piece. in a wooden case Model LLB 16 H Technical data Work table dimensions 500 x 200 mm Drilling width 200 mm Drilling depth 150 mm Drill head height adjustment 150 mm Drill head tiltable - Dsb Hnovkychj Tppout Wescott drill chuck 0-16 mm Speed 3000 rpm Motor power 400 V / 50 Hz / P 2 1.1 kW (1.5 HP) Suction nozzle diameter - Weight 120 kg Dimensions 560 x 740 x 1320 mm Location: from stock 54634 Bitburg - immediately available -