Used metal working machinery & machine tools for sale (18)

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. Nsdpjzu Avzjfx Aqwjlf No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,600 mm Nlsdpjzuzpaefx Aqwjf Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, functionality: unexamined, Technical specifications: Manufacturer: TRUMPF Model: Quicksharp Type: 6840-H3 Year of manufacture: 09/1986 Serial number: 524 Nodpfx Aozvyndoqwelf Mains voltage: 220/380 V Connected load: 1.7 kVA Control voltage: 220 V Required fuse rating: 18 A Used condition, with age-related signs of wear and visible surface corrosion.

Condition: used, Year of construction: 2017, functionality: unexamined, The item consists of two related units and was operated as a stud welding cell. Lot 1 R+P Stud Welding Cell enclosed protective cell made of aluminum profiles safety enclosure with protective doors signal light integrated control cabinet documentation available suitable for automated stud welding processes Lot 2 Nelson Stud Welding Machine Manufacturer: Nelson Stud Welding Type: SD-FSE 1000S Year of manufacture: 2017 Serial number: 1739289 Part No.: 80-07-57 Technical data: Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2000 A (duty cycle 2%) Protection class: IP20 Nlodpfx Aezvylpeqwsf Polarity: STD Scope of delivery: Welding gun Connection cable Mobile equipment cabinet Both lots were last used together as an automatic stud welding system.

Condition: used, Lead and feed spindle lathe, manufacturer Böhringer, type D480 Nljdpfx Aozvyiueqwef with three-jaw chuck, tailstock, Multifix tool holder, machine light, and splash guard, suitable for general turning operations. Technical data: Manufacturer: Böhninger Model: TV9815 Motor power: 11 kW Operating voltage: 400 V, 50 Hz, 3/N/PE Control voltage: 230 V AC, 24 V DC Control cabinet: Rittal, protection class IP65.

Condition: not inspected (used), functionality: unexamined, Universal tool milling machine Nlsdpfx Ajzvyihjqwof

Year of construction: 1991, condition: not inspected (used), functionality: unexamined, Robust pillar drill Thyssen Hüller Hille, model UG24 Year of manufacture: 1991 For industrial use Operating voltage: 380 V, 50 Hz Current draw: 16 A Operating hours according to the hour meter: approx. 16,783 hours. Nlodpfezvyhdjx Aqwof

Condition: used, Year of construction: 1995, functionality: unexamined, IRCO bar feeder, model 4275, for the automatic feeding of bar stock to lathes. Oil-lubricated design. Year of manufacture 1995. Operating voltage 400 V, 50 Hz, connected power 1.5 kW. Sold as shown in the images. Nledpszvyfvjfx Aqwof

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, overall weight: 4,500 kg, Lease return vehicles. Nledpfx Aozvdcrsqwef

Condition: excellent (used), Year of construction: 2018, operating hours: 10,414 h, functionality: fully functional, overall weight: 4,200 kg, Lease return in very good condition. Nljdpszvdawofx Aqwef See PDF for details. Please contact us by email if you have any further questions.

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: Nlodpozichajfx Aqwef • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Nedpfxszh I Iij Aqwslf Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: used, Year of construction: 1999, Machine type: Abrasive blast cabinet Abrasive blasting process: Compressed air blasting Nedpfx Aqjy T N Rxowslf Rotary table: Available Workpiece mounting: Rotary table Operation: Glove operation Pressure range: Approx. 5–8 bar Air consumption: Approx. 1,000–3,000 l/min Blast hose: Abrasive blast hose Abrasive media circuit: Recycling system available Extraction: External unit

Condition: defective spare-parts repository (used), Year of construction: 2005, operating hours: 38,534 h, functionality: not functional, machine/vehicle number: 29310001024, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 560 mm Worktable size: 950 x 650 mm Table load: 1,000 kg Spindle speed: 18,000 rpm Nodpfxoy Ib H Is Aqwslf Number of axes: 3 Tool changer: 30 positions Tool holder: HSK63 MACHINE DETAILS CNC control: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Transport dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Weight: 10.2 t Operating hours Spindle hours: 38,534 h Operating hours: 98,381 h Note: DMG has measured the clamping force on the machine, which is so low that there is a risk of the tool falling out. The machine has suffered spindle damage. There are various leaks, for example at the chip conveyor or in the door area.

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Nledpfx Asy Ib A Neqwjf Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Tool holder: HSK63 MACHINE DETAILS Control: iTNC530 Dimensions & Weight Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: used, Year of construction: 2007, functionality: fully functional, pressing force: 28 t, total length: 1,600 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 3,500 kg, Bending length: 835 mm Back gauge travel range: 0 - 370 mm Stroke: 200 mm Distance between frames (clearance): 890 mm Support tables (L x W): 200 × 275 mm Throat depth: 200 mm Installation height: 325 mm Number of cylinders: 1 Nodpfx Ajy N Umksqwelf Working speed Pressing stroke: 8-10 mm/s Return: max. 35 mm/s Ram positioning accuracy: +/- 0.05 mm Operating manual available

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center manufactured by Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Type: GPS Automatic device for precision bending • Programmable back gauge Type: PB.U12 Consisting of a device for the automatic adjustment of the length of the back gauge tool and a set of segments for the back gauge tool • Delivery device/buffer for panels SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm • Software Type: JOBS4P4.DIARIO Nledpeh Dwqhsfx Aqwsf Automatic management of batch sizes (JOBS4P4), registration of data and movements of the system components (DIARIO) • Control and management system Type: MMACHNT-MICROMach Processor CPU: PENTIUM INTEL II 400 Mhz Operating system: WINDOWS NT Subject to changes/errors in the technical data and prior sale.

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: CE marking, documentation/manual, Trumpf TruBend 5170 with Bendmaster The machine is available from May 6, 2025. Njdpfx Aqoy Exm Tswolf The machine is in good, ready-to-use condition. 6 axes Backgauge with sensors CNC crowning CNC tool displacement Bendmaster (robot with 8m track) Load capacity 60 kg With vacuum suction device for sheets up to 40 kg CNC regrip station Double sheet detection BendGuard Lazersafe safety system Hydraulic tool clamping top and bottom Stroke: 500 mm Press force: 1700 kN Working length: 4250 mm