Pick-up
BMW X5 xD 45 e xLine Exclusiv Head-UP/Harman-Kardon

Fixed price plus VAT

€36,134

Condition

Used

Location

Karlsfeld

Pick-up BMW X5 xD 45 e xLine Exclusiv Head-UP/Harman-Kardon

BMW X5 xD 45 e xLine Exclusiv Head-UP/Harman-Kardon

Machine data

Machine type:: Pick-up

Manufacturer:: BMW

Model:: X5 xD 45 e xLine Exclusiv Head-UP/Harman-Kardon

Condition:: used

Price & Location

Fixed price plus VAT

€36,134

Seller location:: Liebigstr.1, 85757 Karlsfeld, Germany

Call

Technical details

Mileage:: 130,500 km

Power:: 290 kW (394.29 HP)

Fuel type:: hybrid

Gearing type:: automatic

First registration:: 11/2022

Next inspection (TÜV):: 11/2027

Emission class:: euro6

Color:: black

Number of seats:: 5

Equipment:: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter

Details about the offer

Listing ID:: A20095540

Reference number:: 5339

Update:: 12.05.2026

Description

Special equipment:
Aluminium roof rails, satin finish; Driver Assistance System: Driving Assistant Professional; Luggage compartment package; Innovation package; Comfort front seats, electrically adjustable (with memory); Park Assistant Package Plus; Sun protection glazing (rear tinted); Harman-Kardon sound system; Travel and Comfort System; Acoustic glazing.

Further equipment:
- 19" light-alloy wheels, V-spoke 735
- Sport leather steering wheel with airbag
- Sport automatic transmission
- 2-axle air suspension
- Comfort access
- Acoustic comfort glazing
- Luggage compartment partition net
- Tinted glazing
- Warning triangle and first aid kit
- Heated seats, driver and passenger
- Travel & Comfort rail system
- Blow-by heater
- Acoustic pedestrian protection
- Odometer in kilometers
- Active Guard Plus
- BMW Laserlight
- Head-up display
- Harman/Kardon surround sound system
- Legal emergency call
- Connected Package Professional
- Removal of touch function for BMW controller
- xLine
- German specification
- On-board literature in German
- Refrigerant R1234yf
- Special control: Bluetooth/WiFi module
- External body protection
- AGM battery 80 Ah
- Emission standard EU6 RDE II
- EU-specific additional scope
- Wheel bolt locking
- Tire pressure monitoring
- Alarm system
- Aluminium roof rails, satin finish
- BMW Individual exterior line aluminium, satin finish
- Luggage compartment package
- Velour floor mats
- Comfort seat with memory
- Sensatec instrument panel
- Aluminium mesh effect dark trim
- Extended mirror package
- Ambient interior lighting
- High-beam assistant
- Driving Assistant Professional
- Park Assist Plus
- DAB tuner (DAB+ capable)
- Teleservices
- Connected Drive Services
- BMW Live Cockpit Professional
- WLAN hotspot
- Innovation package
- German language version
- Oil service interval 24 months/30,000 km
- Active pedestrian protection
- Sensafin decorative stitching in black

Additional features:
Gsdpfxsxgkvyj Anrjbl
- LED third brake light
- Driver and front passenger airbags
- Acoustic pedestrian warning (external sound)
- Ambient lighting
- Dual-exit exhaust system with chrome trims
- Connected Professional equipment package
- Electrically folding exterior mirrors
- All mirrors with auto-dimming
- Electrically adjustable and heated exterior mirrors
- BMW Live Cockpit Professional
- Brake assist
- DAB tuner (digital radio reception)
- Wheel theft protection (locking wheel bolts)
- Dynamic brake light
- Illuminated entry sills with BMW lettering
- Electric motor 83 kW (hybrid drive)
- BMW Individual exterior satin aluminium line
- Driver assistance system: Active Guard Plus (lane keeping assistant, front collision warning)
- Driver assistance system: Attention Assistant
- Driver assistance system: Driving experience switch
- Driver assistance system: Reversing Assistant
- Bluetooth hands-free system with extended smartphone connectivity
- Passive pedestrian protection system
- Velour floor mats
- Luggage compartment separation net
- Front and rear cup holders
- Split tailgate
- LED tail lights
- Hybrid system 290 kW (3.0-litre engine, 210 kW)
- Interior active carbon filter (odor filter)
- Sensatec instrument panel
- ISOFIX child seat attachments
- 5-door body
- Automatic climate control with auto recirculation
- Rear head airbag system
- Front head airbag system
- Rear headrests
- Sport/leather steering wheel
- Electrically adjustable steering column
- Rear and front reading lights
- Automatic headlight range adjustment
- Light-alloy wh

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2020

65 listings online

Call

Send inquiry

Telephone & Fax

+49 8131 ... show

Fax:

These listings may also fit your interest.

Listing

Horizon BQ-470 PUR | 2009 | 920.000 Horizon BQ-470

Volkach

1,332 km

Horizon BQ-470 PUR | 2009 | 920.000
HorizonBQ-470

Call

Condition: used, Year of construction: 2009, Fully Automatic 4-Clamp Perfect Binder from HORIZON The Horizon BQ-470 is a versatile perfect binder ideal for medium and small runs, as well as single-copy production. With its user-friendly operation and flexible applications, the Horizon BQ-470 is the perfect choice for your bookbinding needs. Key Features: - Easy to use 10.4-inch color touchscreen allows even less experienced operators to create high-quality bindings without problems - Advanced rotating suction feeding system speeds up production by handling many types of cover materials without leaving marks - Automatically adjustable scoring position (4 lines) ensures professional bindings with sharp, square spines Specifications: - Book block size: Max. 320 x 320 mm, Min. 145 x 105 mm - Book thickness: 1 to 65 mm - Cover size: Max. 320 x 660 mm, Min. 135 x 225 mm - Cover weight: 81.4 to 302.4 g/m² (plain paper), 104.7 to 348.9 g/m² (coated paper) - Production speed: Up to 1,350 cycles per hour (EVA), up to 1,000 cycles per hour (PUR) All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Gbedpfx Aoycftgenrsl Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

See details

Listing

Müller Martini sewing machine Ventura MC (3215) (2013) Müller Martini Ventura MC (3215)

Schijndel

949 km

Müller Martini sewing machine Ventura MC (3215) (2013)
Müller MartiniVentura MC (3215)

Call

Year of construction: 2013, condition: used, Sewing machine Müller Martini Ventura MC (3215) Year: 2013 Description: - Colour monitor with touch screen - Semi automatic setting - Feeder - ASIR Automatic Signature Image Recognition: Asir III - 2 + 2 opening possibilities - Book block separator Gedpormyp Rofx Anrebl - Book stacker - Roller table delivery - PIAB/Venturi

See details

Listing

Wiesbaden

1,190 km

Bolster/t-slot plate

Call

Listing

Sükösd

2,094 km

RP Wood Dryer
RPNF28

€60,000

Fixed price plus VAT

Call

Listing

Bischofszell

1,398 km

CREASING MACHINE
JOS HUNKELERMBM 70

Call

Listing

HBC 110 K / 75 kW Bollegraaf Recycling Solutions B.V. HBC 100 K

Netherlands

1,005 km

HBC 110 K / 75 kW
Bollegraaf Recycling Solutions B.V.HBC 100 K

€79,500

EXW Fixed price VAT not applicable

Call

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Gsdpfx Anovf E Avsrjbl Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

See details

Listing

Macclesfield

408 km

Hot foil stamping machine
GietzFSA 790

Call

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 5,500 sheets / hr High speed MABEG suction feeder : : 6 heating zones : 3 x electronic servo longitudinal foil feeds : transverse foil feeds : programmable foil feed with servo drives : non stop delivery Photos show machine in production before reconditioning Godpfx Ajxp Ntvenrjbl

See details

Listing

Kolbus three knife trimmer HD 150.B (2005) Kolbus HD 150.B

Schijndel

949 km

Kolbus three knife trimmer HD 150.B (2005)
KolbusHD 150.B

Call

Listing

Bed milling machine 10400 x 2000 x 1800 mm ANAYAK HVM 11000 DUO

Babberich

984 km

Bed milling machine 10400 x 2000 x 1800 mm
ANAYAKHVM 11000 DUO

Call

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Gbsdjrx Rxtjpfx Anrel Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

See details

Listing

Shredder Shredder Petrol shredder SCHORR RR200THX Holzhäcksler

Schüttorf

1,044 km

Shredder Shredder Petrol shredder
SCHORRRR200THX Holzhäcksler

€3,108

Fixed price plus VAT

Call

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output Gbjdpfx Aexu I T Eenrsl - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

See details

Advertise here