Electronic module valve control

Bachmann Battenfeld PVV100 B 2537/00

Condition: used, Steel construction for crane system Width: approx. 8,5 m Length: approx. 7,95 m Plant dismantled The plant is sold "as is". Viewing: You are cordially invited to view the item - simply contact us and arrange an appointment at short notice. Gtedpfx Afjbruzgeneu Attention: no guarantee, no exchange, no return possible.

Condition: excellent (used), Year of construction: 2008, Demag System 800/1120–9500 Injection Moulding Machine Gtodpfx Afewy U E Ujneu Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / Max. mould height 500 – 1,050 mm Maximum distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Maximum mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electrical-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (auxiliary equipment)

Condition: excellent (used), Year of construction: 2015, WITTMANN BATTENFELD TM 400/3400 injection molding machine Control -UNILOG B6P Year of production – 2015 NUMBER OF HOURS WORKED 33756 ServoPower SO package: Servo drive with variable speed for hydraulic pump to increase energy efficiency and shorten cycle times according to EUROMAP 60 Cycle II and Cycle III Gedpfjwqd Tcsx Afnotu _____ Technical data of injection unit: • Screw diameter: 85 mm • L/D ratio (length to diameter): 22 • Specific injection pressure: 1574 bar • Injection volume (calculated): 2128 cm³ • Max. injection weight (PS): 1936.4 g _____ Technical data of closing unit: • Closing force: 4000 kN • Free space between columns: 710 × 710 mm (W × H) • Min. mold height: 300 mm • Max. plate spacing: 1380 mm • Opening stroke: 670 mm

Condition: excellent (used), Year of construction: 2008, Wittmann-Battenfeld HC 400/2250 S Year of construction 2008 Unilog B6 control system Operating hours: approx. / (pump) Screw diameter 65 mm Fuel weight: approx. 980gr/hp Distance between tie bars 900 x 710mm Extras: Core pull Handling interface Battery incl. Battenfeld Handling R10 Machine weight: 20.000kg Machine is free! Gtedpfx Aswlk Dwefnou Subject to alterations, prior sale and errors excepted!

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Maximum mould opening force: 160 kN Moving platen force – opening: 86 kN Moving platen force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie-bar clearance (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit: Gtjdpsw A N Hfofx Afneu Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Maximum plasticizing rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Hydraulic oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: - Oil tank - Anti-vibration pads - 3 × core pullers - 8 × hot runner control zones - 2 × air valves - Robot interface according to Euromap 67 Additional information: - Machine located in Poland - Immediately available - Loading, transport, installation, and commissioning can be organized

Condition: excellent (used), Year of construction: 2007, operating hours: 79,941 h, clamping force: 1,600 kN, screw diameter: 40 mm, clearance between the columns: 570 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, mold height (min.): 250 mm, Arburg 570A-1600-400 (244) hybrid injection molding machine with sorting flap Number: 244 Availability: in stock Godpfexdlwyjx Afnetu Year of production: 2007 Producer: Arburg Screw diameter [mm]: 40 Injection weight [g]: 184 Injection pressure [bar]: 2000 Closing force [kN]: 1600 Column spacing [mm]: 570 x 570 Plate size [mm]: 790 x 795 Min. mold height [mm]: 250-550 Control type: Selogica Tongue: English, German Installed power [kW]: 21.2 Working hours [h]: 79941 Weight [kg]: 9000 Dimensions [mm]: 5100 x 2000 Feed hopper: NO Robot socket: Yes Air valve: 6x

Condition: used, machine/vehicle number: 8FBMT35-12967, Year of construction: 2019, operating hours: 1,412 h, lifting height: 5,000 mm, fuel type: electric, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Empty weight: 6.466 kg Lifting capacity: 3.500 kg Maximum passing height: 258,5 cm Supply voltage: 80 V Remanufactured: Yes Godjray Snepfx Afnetu Front tyre size: SE nicht kreidend Rear tyre size: SE nicht kreidend Transport dimensions (LxWxH): 2,89x1,25x2,585 Please contact Karl Leitner for more information