Filling machine De Vree V 156

Abfüllmaschine De Vree V 156

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Dsdpfx Aozi Duhsqvjcp Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system Dedewp E Tnspfx Aqvecp

Condition: new, Year of construction: 2021, Industrial Fabric Storage Hall for Sale – Approx. 500 m² For sale: a well-maintained industrial fabric hall with an area of approximately 500 m². The hall is suitable for use as a warehouse, production facility, or for storing timber, machinery, and equipment. Dcodpfx Aqsz Im Edjvsp - Approximate floor area: 500 m² - Robust steel frame construction - Durable PVC/fabric cladding - Large sliding doors - Separate personnel access door - Good internal headroom - Easy access for forklifts and other machinery - The hall can be dismantled and reassembled at another location - Currently erected and available for inspection Price: Upon request / negotiable. Dismantling and loading for transportation can also be arranged separately.

Condition: used, fuel type: diesel, color: blue, Year of construction: 2010, Year of manufacture: 2010 Usable material: concrete Dsdpfxeuu A S Ns Aqvjcp CE marking: yes Damage: none Price: On request

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp Dcjdpfxeqx Sz De Aqvep

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 350 kW (475.87 HP), type of input current: three-phase, overall weight: 1,930 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,600 mm, total height: 2,000 mm, AMMONIA CHILLER GEA GRASSO 350 KW Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Dodpfsim R A Isx Aqvecp Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Pump operating hours: 95239 Dcsdpov D Nxljfx Aqvop Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: good (used), Toyo Jidoki pouch packing machine with vacuum option. Has come from major UK food factory but not used for at least five years. Djdpouf A Idefx Aqvjcp

Year of construction: 2025, condition: new, Beltpress for fruits and vegetabes Dcedpfjbpz D Ajx Aqvop Beltwith 1250mm capacity up to 10000 kg/h 27 rollers beltcleaningsystem with brushes and highpressurecleaning

Condition: used, Year of construction: 2021, We are offering these used DME 40HL 40HL insulated fermentation tanks, manufactured in 2021. Manufacturer: DME Model: 40HL Date of manufacture: 06/23/2021 Serial number: B5715-30-03 Year of manufacture: 2021 Condition: used Type: 40HL insulated fermentation tanks Dsdpfxoza Twno Aqvocp If you have any questions or would like more information, please feel free to send us a message or call us. Price per unit.