Birrificio Barba d’Oro

Condition: used, Year of construction: 2005, Overview Dcedpfx Adez Nc Haehon This KOSME EXTRAFIX 12T is a rotary combination labeller for glass wine bottles, built in Italy in 2005. Five labelling stations - three self-adhesive and two cold glue - work around a 12-plate carousel, so front, back and neck labels in both technologies can be applied in one pass. The machine is rated at 12,000 bottles per hour and has run on 750 ml, 375 ml and 1,000 ml bottles in a winery. It is still installed and under power, and can be visited by appointment. Technical data - Manufacturer: KOSME - Model: EXTRAFIX 12T - Year of manufacture: 2005 - Machine type: rotary combination labeller (self-adhesive + cold glue) - Capacity: up to 12,000 bottles per hour - Container: glass wine bottles, 750 ml, 375 ml and 1,000 ml - Bottle plates: 12 - Labelling stations: 5 (3 self-adhesive, 2 cold glue) - Power supply: 400 V, 3 phases + PE, 50 Hz - Installed power: 7 kW - Weight: approx. 4,200 kg - CE marked Equipment - 3 self-adhesive labelling stations, each with its own control display, label reel unwinder and backing-paper rewinder - 2 cold glue stations with label magazine and glue pallets - Rotary carousel with 12 bottle plates and centring bells - Infeed screw, infeed and outfeed star wheels, bottle conveyor with guide rails - Control cabinet with operator panel - Stainless steel frame with transparent safety guarding Condition Used machine, still installed and connected. Can be inspected on site by appointment. Availability Available immediately. Location: France. Sold EXW; dismantling and truck loading are not included.

Condition: used, Year of construction: 2000, Overview This Zambelli LFT 50 is an automatic shrink wrapper built in 2000, with a shrink tunnel and a Nordson hot-melt unit. It packs in film only, pad + film or tray + film at up to 50 packs per minute, for plastic and glass bottles, cans and jars. The machine last ran 4x3 and 6x4 packs. Motors and transmissions sit at the back of the machine, separated from the wrapping zone at the front, for easy maintenance and a clean working area. Product separation runs on chain-driven bars with a servo motor, and the film is cut by a single servo-driven rotary blade, which allows very thin films. The shrink tunnel works with differentiated air flows for even shrinking, also on printed film. Technical data - Manufacturer: Zambelli - Model: LFT 50 - Year of manufacture: 2000 - Machine type: shrink wrapper with pad and tray forming - Output: up to 50 packs per minute - Pack types: film only, pad + film, tray + film - Formats run: 4x3 and 6x4 - Control: Siemens S7-300 PLC with touch-screen operator panel - Electrical cabinet: 380 V - Dimensions (L x W x H): approx. 15,130 x 1,694 x 2,350 mm - Weight: approx. 4,500 kg Equipment - Shrink wrapper with pad/tray magazine and manual format change-over - Shrink tunnel - Nordson ProBlue 4 hot-melt glue unit - Conveyor section - Electrical cabinet with Siemens S7-300 control - Format change-over instructions for the 4x3 format Condition Used. Overhauled by the manufacturer in 2022 and kept in production until it was replaced by a newer Zambelli machine in a line upgrade. Dismantled by Zambelli technicians and ready for shipping. Dodpfjz Nc E Asx Adhocn Availability Available immediately. Location: Italy.

Condition: used, Year of construction: 2011, Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data - Manufacturer: Krones - Model: AirCo - Year of manufacture: 2011 - Machine type: air conveyor, neck handling of empty PET bottles - Total conveyor length: approx. 60 m - Declining sections: 10 sections at 10°, approx. 16.8 m in total - Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right - Fan units: 7, each with filter housing - Diverter: 1 Conveyor sections In the order of the plant layout: - Fan unit - Straight section 3,500 mm - Straight section 500 mm - Curve 45° left, radius 750 mm - Straight section 400 mm - Straight section 2,000 mm - Straight section 2,000 mm - Fan unit - Straight section 2,000 mm Dcodpfoz I Tbrex Adhjn - Straight section 1,000 mm - Straight section 400 mm - Straight section 300 mm - Curve 30° left, radius 750 mm - Straight section 2,000 mm - Straight section 600 mm - Straight section 400 mm - Curve 15° left, radius 750 mm - Straight section 1,500 mm - Straight section 600 mm - Straight section 500 mm - Fan unit - Straight section 1,500 mm - Curve 15° right, radius 750 mm - Straight section 2,000 mm - Straight section 500 mm - Straight section 600 mm - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Declining section 2,000 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Straight section 1,500 mm - Curve 90° left, radius 750 mm - Straight section 1,500 mm - Fan unit - Straight section 2,000 mm - Straight section 2,000 mm - Straight section 400 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 750 mm - Straight section 400 mm - Fan unit - Declining section 2,000 mm at 10° - Declining section 750 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,000 mm at 10° - Declining section 2,000 mm at 10° - Fan unit - Straight section 1,000 mm - Diverter - Curve 90° left, radius 750 mm - Fan unit - Straight section 2,000 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 1,500 mm - Straight section 720 mm Equipment - Stainless steel conveyor channels with neck guide rails - Stainless steel support stands and ceiling suspensions - Fan units with air filters - Sensors and pneumatic components along the conveyor - Plant layout drawing of the installation Condition Used, currently installed in the plant. The bottle unscrambler visible in some photos is not included. Dismantling and the exact scope of delivery are agreed during the offer stage. Availability Available immediately. Location: Germany.

Condition: used, Year of construction: 1969, Overview This premix beverage mixer was manufactured in 1969 by Stork Jansen & Sutorius N.V. The machine is designed for the production of carbonated and non-carbonated soft drinks as well as carbonated water. It is configured as a multi-tank mixing and carbonation system including product tank, vacuum tank and saturator for consistent mixing and CO₂ dosing. The unit has been fully refurbished in 2020, is currently in operation, and available for inspection. Technical data - Capacity: approx. 15,000 L/h - Application: Beverage mixing (carbonated and non-carbonated soft drinks, carbonated water) - Configuration: Multi-tank system (product tank, vacuum tank, saturator) - Operating pressure: up to approx. 6 bar (typical 1.2 – 1.4 bar) - CO₂ content: approx. 6.5 – 7 g/l - Electrical: 380 V, 3-phase - Drive power: approx. 5.5 – 7.5 kW Scope of Delivery  - Premix beverage mixer | Stork Jansen & Sutorius N.V. | 1969 / 2020 | Multi-tank system with carbonation unit - Plate heat exchanger | Alfa Laval  Dcjdsz I R N Hopfx Adhsn - Pump unit | Siemens | With motor - Control system | Kinco | HMI touchscreen - Frequency converter 

Condition: used, Year of construction: 2012, Overview This Gernep Labetta 4/3/8 480 2A is a rotary cold glue labeller for glass bottles, built in 2012 by Gernep (Barbing, Germany). It was in service at a craft brewery and applies body, neck-ring and back labels at up to 9,000 bottles per hour. The machine ran on one format, a 0.30 L BNR beer bottle, and is supplied complete with format parts, a large stock of spare parts and the glue pump units. Technical data - Manufacturer: Gernep (Barbing, Germany) - Model: Labetta 4/3/8 480 2A - Year of manufacture: 2012 - Machine type: rotary cold glue (wet glue) labeller for glass bottles - Output: up to 9,000 bottles/h - Labelling stations: 2 - station 1 body label and neck-ring label, station 2 back label - Bottle format: 0.30 L BNR beer bottle (glass) - Direction of operation: left - Control: Siemens S7 Equipment Dcedpfx Adez I Rt Eehen - Two wet glue labelling stations for body, neck-ring and back labels - Format parts for the 0.30 L BNR bottle - Large stock of spare parts - Glue pump units - Complete technical documentation: operating manuals, spare parts lists, component manuals, electrical and mechanical drawings Condition Taken out of service in working condition in May 2026 and stored since. Regularly maintained by Gernep; major Gernep service in March 2025 with new bearings and wear parts. Everything required to put the machine back into operation is included. The machine can be moved by forklift or pallet truck. Inspection is possible by arrangement, and the former operators are available for questions. Availability Immediately available. Location: Netherlands.

Condition: used, Year of construction: 2012, Overview Krones filling and labelling block from 2012 for glass bottles, offered as one package: a Krones Modulfill filler/capper monoblock with 60 filling valves and 12 capping heads, and a Krones Universella cold glue labeller with two labelling stations for front, back and neck labels. The filler is specified for approx. 15,000 bottles per hour and was observed in production at approx. 14,990 bottles per hour; the labeller is rated for 20,000 bottles per hour. Both machines are in production until early 2027; the labeller has been regularly maintained by Krones. Scope of Delivery - Filler/capper monoblock | Krones | MODULFILL | 60 filling valves, 12 capping heads, plastic screw caps | 2012 - Cold glue labeller | Krones | UNIVERSELLA | 2 labelling stations (front, back, neck), date coder, glue pumps | 2012 Technical Data - Filler/Capper - Application: filling and closing of glass bottles - Filling system: volumetric filling - Filling valves: 60 - Capping heads: 12, plastic screw caps - Output: approx. 15,000 bottles/hour - Adjusted to bottle sizes: 0.75 l (Ø75 mm x 265 mm) and 0.33 l (Ø65 mm x 175 mm) - Control: Krones iPanel CD - Operating hours: 41,381 h (production counter 40,754 h) - Electrical supply: 400/230 V, AC 3/N/PE, 50 Hz, full load current 36 A - Construction: stainless steel and glass safety enclosure Technical Data - Labeller - Labelling: cold glue, 2 stations for front, back and neck labels - Output: 20,000 bottles/hour - Formats: 0.25 l Vichy, 0.5 l, 0.7 l and 0.75 l GDB and Schlegl bottles - Pitch circle diameter: 600 mm - Container plates without servo drive - Infeed and outfeed direction 90°, counter-clockwise rotation - Date coder installed on the machine Dodpfx Aez I Rfnodhjcn - Glue pumps included - Operating hours: 36,000 h Condition Used, both machines in operation in a beverage production environment; labeller regularly maintained by the OEM. Availability Available from . Location: Germany.

Condition: used, Year of construction: 2007, Overview Complete wine bottling line with KHS and Krones machines for 0.75 l glass bottles, rated at 12,000 bottles per hour. The line runs from depalletizing, bottle washing and empty bottle inspection through the KHS Innofill NRF filler-closer monoblock (natural cork or aluminium screw caps) to capsuling, labelling, case packing and robotic palletizing. A KHS process area with cartridge filtration and a wine warmer-cooler prepares the wine ahead of the filler. The line is still installed and can be inspected on site. Technical data - Product: still wine - Containers: glass bottles, design bottle 0.75 l - Line output: 12,000 bottles/h - Closures: natural cork, aluminium roll-on screw caps, shrink capsules - Years of manufacture: 2006 - 2023 Scope of Delivery Type | Manufacturer | Model | Description | Year | Listing Bottling line - Glass depalletizer | Krones | PRESSANT UNIVERSAL 1N | sweep-off depalletizer, layer-pad and empty-pallet handling, 14,000 containers/h | 2023 | - Bottle washer | KHS | INNOCLEAN | single-end washer for returnable glass, up to 14,500 bottles/h, drive and panel modernised in 2022 | 2007 | - Empty bottle inspector | Krones | LINATRONIC M | base, finish, thread, sidewall and residual liquid inspection | 2018 | - Filler-closer monoblock | KHS | INNOFILL NRF | 50 filling valves, cork closer and Zalkin roll-on capper with 10 heads each, CIP, 12,000 bottles/h | 2007 | - Capsuling machine | Kematec | MBK 12 AS | shrink capsules, 12 heating stations, up to 12,000 bottles/h | 2006 | - Bottle dryer | Kematec | T20-3 KMT | air-knife tunnel | 2006 | - Labeller | Krones | ERGOMODUL | 2 cold-glue and 2 self-adhesive stations | 2020 | - Case packer | KHS | INNOPACK SP | pick-and-place packer, KUKA controller | 2006 | Dcsdpfjz I Rcaex Adhjn - Palletizer and stretch wrapper | ABB, Strapex | FLEXPALLETIZER, SWR 30 | 2 robot cells, pallet destacker, ring wrapper | 2007 | - Pallet labeller | Logopak | LOGOMATIC 920 II PF | print-and-apply | 2007 | - Conveyors | all connecting bottle, case and pallet conveyors of the line Process area - Filtration system | KHS | CORVUS | cartridge microfiltration, 4 housings | 2007 | - Wine warmer-cooler | KHS | INNOPRO | plate heat exchanger, up to 9,900 l/h | 2006 | Condition Used, still installed. Each machine is also listed on its own page with full technical data and photos - follow the link at the end of each row in the scope of delivery. Availability Available immediately. Location: Belgium. Delivery terms: Ex Works Belgium.

Condition: used, Year of construction: 2016, Overview Complete robotic end-of-line system from a wine bottling plant, built in 2016. It currently runs at 16,000 bottles per hour and is capable of up to 24,000 bottles per hour. Packed cases arrive on the infeed conveyors, are prepared into layers and stacked onto pallets by a CERMEX PAL-VITE 410 robot palletizer with a FANUC M-410iB robot. The full pallets run on the CERMEX pallet conveyors and transfer shuttle through a TOSA 215 rotating-arm stretch wrapper and a SEGEPAR print-and-apply pallet labeller to the accumulation conveyors. The system is still installed and under power and can be inspected. Technical data - Line output: 16,000 bottles per hour in current operation, up to 24,000 bottles per hour - Robot palletizer: CERMEX PAL-VITE 410, FANUC M-410iB robot with layer gripper, 12/2016 - Palletizer load ratings: 255 kg per layer, 540 kg empty pallet stack - Palletizer connection: 400 V, 3 phases, 50 Hz, full-load current 110.75 A - Full-pallet handling: CERMEX, 400 V, 3 phases, 50 Hz, full-load current 20.38 A, 12/2016 - Stretch wrapper: TOSA 215, rotating arm, 2016 - Pallet labeller: SEGEPAR LOGITRON 910, 220 V, 50 Hz, compressed air 6 bar / 200 l/min, industrial PC control, 2016 - Operation: CERMEX touch-screen HMIs, safety fencing with interlocked access doors and light curtains Scope of Delivery Dodpfx Aez Iy Hbsdhocn - Case infeed and layer preparation | CERMEX | case conveyors with layer-forming stations | 2016 - Robot palletizer | CERMEX | PAL-VITE 410 | FANUC M-410iB robot with layer gripper, empty pallet magazine | 2016 - Full-pallet handling | CERMEX | roller conveyors, transfer shuttle and accumulation conveyors | 2016 - Stretch wrapper | TOSA | 215 | rotating arm | 2016 - Pallet labeller | SEGEPAR | LOGITRON 910 | print-and-apply | 2016 - Control cabinets, operator panels and safety fencing of the installation Condition Used, still installed and under power. Inspection possible by appointment. Availability Available immediately. Location: France. Dismantling and loading by the buyer (EXW).

Condition: used, Year of construction: 2023, Overview Compact tabletop canning system built by the US manufacturer Wild Goose Filling in 2023. The Gosling fills and seams beer and other beverages in 330 ml and 440 ml cans with 202 CDL ends at up to 720 cans per hour (330 ml). The CE version for 230 V single-phase supply comes with pre- and post-rinse and the DO hood with CO2 regulation for low oxygen pickup. The machine is still installed and can be seen in production on request. Technical data - Manufacturer: Wild Goose - Model: Gosling - Year of manufacture: 2023 - Output: up to 720 cans/hour (330 ml), 12 cans/minute - Filling heads: 1 - Can formats: 330 ml and 440 ml, body diameter 211 Dcjdpoz Iy Apofx Adhon - Can ends: 202 CDL - Electrical supply: 230 V single-phase, 50 Hz - Compressed air: 185 L/min at 6.5-7.0 bar, clean and dry - CO2: 0.8-1.7 bar - Dimensions: 112 cm L x 66 cm W x 104-109 cm H - Weight: 125 kg - Configuration: tabletop system with adjustable leveling feet, enclosed stainless-steel structure - CE-marked Equipment - Pre- and post-rinse assemblies - DO hood with CO2 regulation (DO Buster CO2 tunnel) - Quick-change system for can bodies of different heights - Automated CO2 purging and foam control - Seaming station for aluminum and steel cans, lid chute for hands-free lid placement - Full-color touchscreen with recipe pre-sets, alerts and auto-testing functions - CIP/SIP automation - Seam check tools (metric) Condition Used, in working order and still installed. The machine can be visited in production on request. Dismantling, handling and truck loading are included. Availability Available immediately. Location: France.

Condition: used, Year of construction: 2016, Overview Automated 2-vessel steam brewhouse for 20 BBL (2,347 L) batches, built in 2016 by American Beer Equipment (ABE), Lincoln, Nebraska, USA. The package covers the complete hot side: mash/lauter tun, kettle/whirlpool, hot and cold liquor tanks, plate heat exchanger, UL control cabinet with touch-panel HMI, an ATTSU steam generator and a reverse osmosis water treatment unit. Currently installed and in operation. Technical data - Manufacturer: American Beer Equipment (ABE) Djdpfx Ajz Iypvedhocn - Year of manufacture: 2016 - Batch size: 20 BBL (2,347 L) - Mash/lauter tun: 20 BBL (2,347 L), rake drive with 3 HP SEW gear motor - Kettle/whirlpool: 20 BBL (2,347 L) - Hot liquor tank: 30 BBL (3,520 L), steam heated - Cold liquor tank: 2,347 L - Heating: steam (brewhouse and hot liquor tank) - Material: AISI 304 stainless steel, vessels and piping - Connections: 1-1/2" Tri-Clamp sanitary - Pumps: 2 HP stainless sanitary centrifugal pumps, 30 GPM at 15 PSI - Operation: automatic valves, transfers and pumps, controlled from the HMI - Electrical supply: 380 V, 3-phase, 50 Hz, 40 A Scope of Delivery - Mash/lauter tun | ABE | 20 BBL | rakes with SEW gear motor, grist hydrator, wort grant, mash pump | 2016 - Kettle/whirlpool | ABE | 20 BBL | steam heated, brew pump | 2016 - Hot liquor tank | ABE | 30 BBL | 3,520 L, steam heated, HLT pump, liquor blending assembly | 2016 - Cold liquor tank | ABE | 2,347 L | 2016 - Plate heat exchanger | ABE | 20 m² | AISI 304 plates, design temperature 150 °C, rated pressure 116 PSI (8 bar) | 2016 - Control cabinet | ABE | UL | touch-panel HMI, temperature controllers for mash, kettle and HLT, Delta frequency inverters | 2016 - Steam generator | ATTSU | RL-300/12 | natural gas burner, max. working pressure 12.3 bar, max. temperature 193 °C, 501 L total volume, 3 x 400 V, 1,130 kg empty weight | 2016 - Reverse osmosis unit | with water softener and brine tank - Hard-plumbed AISI 304 sanitary piping with automatic valves Documentation ABE brewhouse manual (specifications, plumbing and electrical diagrams, HMI screens) and ATTSU steam generator manual. Condition Used, installed and in operation. Availability From 23 September 2026. Location: Spain.

Condition: good (used), 2 x 6,000-liter stainless steel tanks with agitators, in good condition, fully functional. Dsdpfxsz Iwmxs Adhocn

Condition: used, Year of construction: 2007, Overview This GALDI RG50/2 UCS is an automatic form-fill-seal machine for gable-top cartons, built in 2007 in Italy. It erects the cartons from flat blanks, fills and seals them at up to 3,000 cycles per hour, and a cap applicator is included. The machine currently fills liquid egg products and is suitable for milk and other liquid food products. It is still installed and in production. Technical data - Manufacturer: GALDI (Italy) - Model: RG50/2 UCS - Year of manufacture: 2007 - Machine type: automatic form-fill-seal machine for gable-top cartons - Capacity: up to 3,000 cycles per hour - Carton format: 95 x 95 mm cross section - Products: liquid egg products; suitable for milk and other liquid foods - Installed power: 28 kW - Power supply: 380 V / 50 Hz - Weight: 5,000 kg Equipment - Magazine for flat carton blanks - Filling station with sanitary product valves - Cap applicator - Control panel with QuickPanel View touchscreen HMI and push-button controls Condition Used. The machine is installed and in production. A spare parts list is available. Spare parts can be offered in addition. Dsdjz Ipa Rjpfx Adhjcn Availability From 31 December 2026. Location: Belgium.

Condition: used, Year of construction: 2005, Machine: ALOWAG Pump 25.000 l/h Dcjdpfx Asz Icvxedhen

Condition: used, machine/vehicle number: 13510, Machine: SAUTELMA ROTOLOK MINISMART Scales SAUTELMA Dsdoz Icvrspfx Adhocn

Condition: used, Machine: Bortolin MA 88 lAP Devider MA 88 lAP Dcodoz Icvfepfx Adhon

Condition: used, Year of construction: 2016, Cap Conveyor outlet High 1.8m Dcodpfjz Icu Uex Adhen

Condition: new, Year of construction: 2026, TECHNISCHE ANGABEN Anzahl Stationen: 2 Stationen für Selbstklebeetiketten Etikett: Deckel + Boden Etikett-Breite: 30-300 mm (zu spezifizieren) Behälterformat: runde und eckige Flaschen Seitliche Gurtbänder zum fixiren der Produkte beim Etikettieren Leistung: bis ca. 4000 Fl./Std. Dcedpfx Adez Icu Ishsn CE Konformität: Erfüllt die CE Richtlinie Gewicht: ca. 600 KG Abmessungen: 2800(L) x 1300(B) x 2400(H) mm YouTube Video: Technical data: working direction: left-right, linear capacity bph max.: 4000 labels: self adhesive labels number of labelling stations: 2 bottle diamater max (mm): 120 bottle diamater min (mm): 40 bottle height max (mm): 330 bottle height min (mm): 60 speed adjusment: frequence converter

Condition: used, Crowncapper 29mm workinf direction left right Dcjdsz Icubepfx Adhen

Condition: used, Year of construction: 1990, - Year of construction: 1990 Dedpfxoz Ict Do Adhjcn - Frame height: 3200 mm - For pallets: 800 x 1200 mm and 1000 x 1200 mm - Depalletising head: With clamping slats - Large bottle table: 1350 x 1900 mm - Bottle collation on single-lane conveyor L: 3000 mm

Condition: used, Year of construction: 1989, machine/vehicle number: 890046, Working Temp Max 120C° Max Pressure 8 Bar Djdpfx Adsz Ictwshocn Volume 17L

Condition: used, Year of construction: 1994, machine/vehicle number: 3120, Machine: Arol Beta VA Schraubverschließer AROL Dcsdpfx Asz Ictqedhon

Condition: used, Machine: Holvrieka Lagertank 10.000 l Technical data: Volume (liter): 10000 Diameter (cm): 210 Height with feeds (cm): 365 Dcedpfx Aoz Ictdsdhjn Tank type: Storage tank Material: Stainless steel V4A AISI 316L Manhole: on side Level indicator: External level tube Sampling valve: yes Support: On legs Temperature control: Cooling plates

Condition: used, Year of construction: 2008, - with 6 plates - with 2 labeling stations (front- and back label) for self-adhesive labels Dodpfx Adez Icryohjcn Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 6000 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 6 bottle diamater max (mm): 100 bottle diamater min (mm): 60 bottle height max (mm): 370 bottle height min (mm): 180 motor height adjustment: yes speed adjusment: frequence converter

Condition: used, Year of construction: 2003, - Capacity: approx. 4,000 bottles/hour, - corking heads: 4, Dodpfxsz Icrme Adhocn - very good condition, - format parts for many bottles available, - Working direction: left / right.

Condition: used, Year of construction: 2000, The blow moulding stations are new and have never been used. Dcedpfoz Icraox Adhjn