Schreinerei Eckl

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling Unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety guard Fpedeyttf Sepfx Ag Dsd The machine is sold and delivered in its actual technical and legal condition ('as seen and approved'), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Fodpoyttcwsfx Ag Djpd Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 80 m/min Traverse speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of traverse supports with suction: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling (X-direction): 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of tool positions: 18 Tool magazine 2 Number of tool positions: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial descriptions of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7350

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, number of spindles: 21, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 3,200 mm Travel distance Y-axis: 1,300 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 60 m/min Traverse speed Z-axis: 25 m/min Number of suction traverse beams: 6 Spindles Number of vertical drilling spindles: 15 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 2 Total number of spindles: 21 Milling unit Fodpfx Agsytr Rye Depd Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of tool positions: 10 MACHINE DETAILS Total power: 26 kW EQUIPMENT Vacuum pump WINDOWS-based control system WRT machine programming software The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 8174

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Working area X: 3060 mm Working area Y: 1260 mm Working area Z: 150 mm 3-axis electrospindle with 4th axis option 12 kW milling motor with ISO 30 attachment Prepared for use with aggregates 1 ISO 30 aggregate with 2 outputs for horizontal milling Fedpfx Asytp E Uog Depd 1 Saw aggregate, diameter 215 mm B21L drilling head 10-position revolving tool changer Working table with 6 ATS beams, length 1200 mm 18 supports, 4 loading assistance supports Spindle reaction arm CNC control: XP 600, Biesse Works graphical interface Software: BiesseWorks Advanced Climatized electrical cabinet 1 vacuum pump 90 m3/h Safety mats Protection fences 12 suction cups for narrow parts, 12 suction cups 142x136, 6 suction cups 132x75, 6 suction cups 132x54xh48

Condition: used, Year of construction: 2008, machine/vehicle number: 26010808, functionality: fully functional, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and Technical Data: Fpjdpfx Agoyr Nwne Dod CNC Control: Siemens 840 D Maximum travel paths of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = ± 90 degrees C = ± 270 degrees HSD milling unit with 10 kW, liquid-cooled Continuously variable spindle speed up to 24,000 rpm Lifetime grease lubrication Tool holder HSK 63F 1 multi-spindle drilling unit with pneumatic advance, mounted on the milling unit 16 individually selectable vertical drilling spindles 1 horizontal double drilling spindle in X direction and 1 x the same in Y direction Drill holders each 10 mm diameter Note: Workpieces machined with the drilling unit = 900 mm using X/Y reference spindle Milling unit and drilling unit with 200 mm extraction connections, each equipped with pneumatic shut-off valve, joint connection to customer-side extraction system, diameter 300 mm Tool changer: 1 drum-type tool magazine for 5-axis milling unit, 20 positions for tool diameter 90 mm resp. max. 160 mm with sorted placement, maximum tool length 160 mm One saw blade up to max. 300 mm diameter can be stored and changed; this occupies 3 storage positions Special tool lengths up to max. 180 mm possible with corresponding restriction of working area Maximum tool weight 6 kg (including HSK holder) Total magazine weight approx. 60 kg Magazine positioned at the unit output position Machine table: 8 support beams, manually adjustable along the machine length, each beam with 1 lowerable workpiece stop, fixed facing the operator Table area can be split into two clamping zones, per station: - 1 length stop, pneumatically raisable and lowerable - 2 pneumatically raisable and lowerable sliding rails - 1 vacuum circuit Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with 250-liter buffer tank 16 vacuum suction cups, 110 mm diameter Vacuum cup kit for stair production incl. touch valve 1 clamping fixture for posts/curved parts Including chip conveyor Including NC-Hops 5, Wop system Including bumper safety device at the front and fencing on the sides and at the rear Central lubrication Rated power: 21 kW Fuse: 63 A Availability: approx. March 2026 Location: Westerwald

Condition: used, SCM Tech Z2 machining centre, main spindle 8.5KW, working area 3050 x 1300mm, tool holder HSK-F63, Fpodjyr Iktepfx Ag Dod vertical drills: 12 pcs, horizontal drills: 6 pcs, Software: SCM XILOG MAESTRO, operating hours: 6500h, year: 2014, weight: 3000kg.

Condition: new, max. workpiece length 4500,6000 mm profile spindle 3 Stück main drive 24 kW Control Siemens 840d Working Process Logos Life Evo XS 2345 ----- Vollautomatisches CNC-Fensterfertigungsanlage mit automatischer Be- und Entladung. 2 Portale mit 3 Frässpindeln mit 4- und 5-Achstechnologie CNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen 8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität und Produktivität 128 Werkzeugplätze NEU: Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie für kleinere Betriebe! Nebenstehend finde Sie aktuelle Videos dieser Baureihe. Fpodpfx Agjyrtyye Dod

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles Fpedpsyq Sztsfx Ag Djd (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: good (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, Equipment: CE marking, documentation/manual, HOMAG Optimat BAZ 722/42/16/K Fedpsyq Nkrofx Ag Dspd Gantry CNC machine with 2 shuttle tables Options included: Vacuum pumps 2pcs Parts positioning laser. Vacuum pads Scrap parts transporter

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool change positions: 22 Number of suction traverses: 10 Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of positions in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Fjdpjyqzrnefx Ag Depd Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods before collection and shall be responsible for the installation, securing, and use of the machine at the place of destination. External reference: 8011

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Working area X: 4000 mm Working area Y: 1600 mm C-axis electrospindle, power 11 kW, HSK 63F interface Vertical drilling heads: 17 Horizontal drilling head with cross position + blade Milling and end-processing unit Fodpfoyprr Nex Ag Djpd 360° gluing unit Combined edge trimming/scraper unit Edge band magazine with 2 positions 12-position rotary magazine Control: Power Control PC 85 WoodWop7.1 (update in 2018, paid approx. €9,500) Worktable with 8 beams and suction cups Elmo Rietschle vacuum pump Safety mats Chip conveyer belt

Condition: used, Year of construction: 2018, max. workpiece length 4200 mm profile spindle 1 Stück main drive 15 kW HOMAG CNC Machining Center BMG310/42/F/K, Year of Manufacture 2018 ----- This machine is part of the sale of a complete window manufacturing business, see stock number 1305-6979. Machines still connected and ready for demonstration Technical specifications: ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lift rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows For a detailed description, please see the attached PDF document! ----- Price: on request! Options with additional costs: ----- - Used Leitz tools for Homag with curved tooling, compatible with SCM Windor 40 R systems #1305-6993. Price: 12.000 Euro - Barbaric vacuum lifter, manufactured in 2015. Price: 4.500 Euro - used Löwer MZP 1 mini fingerjointing press for arched windows Price: 1.000 Euro Fodpfxeyn R Iaj Ag Depd (Technical specifications according to the manufacturer, without guarantee!)

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY EUR 130,000!!! This price is valid only until March 21, 2026! Take advantage of this opportunity! We invite you to purchase a NEW and exceptional 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. We are offering the new SIGMA model, which is exceptionally well-equipped. The machine is completely new, and the attached specification details all functions, parameters, and production capabilities. FANUM has been recognized for years for its reliability, accuracy, high performance, and fast processing speed. The MACHINING CENTER offered is BRAND NEW. It was purchased from FANUM Sp. z o.o. in 2021 and delivered to our facility directly by the manufacturer. The FANUM Sp. z o.o. service team only performed initial commissioning and the machine has not been used since. Its condition is as NEW. Our model is extremely well-equipped and offers practically everything required. A comparable new unit currently costs approximately EUR 282,350 net (PLN 1,200,000 net). Fpedpfeyn Rpwsx Ag Dsd We maintain direct contact with, and support from, the manufacturer, FANUM Sp. z o.o. An additional commissioning and demonstration can be arranged at our facility. It is also possible to organize transportation to the new owner’s location and to have FANUM's engineers install and start up the machine at the installation site. The proposed price includes the machine itself, but we can also provide an offer with installation and commissioning at the new location. With a discount exceeding 40% (over EUR 117,640 net, approx. PLN 500,000 net) off the new purchase price, this is an extremely attractive opportunity for anyone looking to expand their production fleet with a similar machine or who did not anticipate acquiring a modern, new, and highly efficient MACHINING CENTER within their planned budget. General terms of sale: • Although the machine is NEW, it was manufactured in 2021 and we do not offer any guarantee or warranty; • Returns are not accepted; • The price shown does not include VAT (23% for buyers in Poland), which will be added to the invoice—please check the price in the listing; • Single ownership. * Price in EUR calculated based on NBP exchange rate: 1 EUR = 4.25 PLN. A warm welcome to all users of the MACHINESEEKER platform. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery dealer. We own numerous properties in Poland and are a developer of houses and apartments in Warsaw, the capital of Poland. The machines offered for sale are our property, acquired through settlements with tenants from the furniture industry. We are familiar with the machines’ history and condition, verified as per our descriptions. We are in direct contact with manufacturers who can provide additional support—Homag, Otto Martin, OMC Machinery, and FANUM. Since we do not require these machines, our prices are highly attractive, especially given their condition is virtually new. We can assist with transportation anywhere in Poland or the EU. Inspections before purchase are welcome. Best regards.

Condition: used, Year of construction: 2015, machine/vehicle number: AA1/018167, functionality: fully functional, operating hours: 18,050 h, input voltage: 400 V, input current: 59 A, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 180 mm, number of axes: 5, number of slots in tool magazine: 26, total height: 3,500 mm, total length: 6,000 mm, total width: 3,500 mm, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this used SCM Tech Z5 machining center for sale. Year of manufacture: 2015. This is a 5-axis CNC machine, currently connected and ready for demonstration. Technical data and features: • Model: SCM Tech Z5 • Type: AA1/018167 • Year: 2015 • Working area: 3,300 × 1,400 × 180 mm • Axes: 5-axis execution Fpedpfjynwu Tex Ag Djd • Control/software: Maestro Version 1.00.022.1034 (3D design and milling) • Includes Clemex system • Additional licenses: 1× 3D dongle, 2× 2D dongles • Connection: 400 V / 59 A • Vacuum pump: Type Q2EFA132M6C-34 • Tool set with approx. 20 cutters (including diamond cutters, insert, roughing, cove, and rounding cutters) • Additionally, I am offering my Palette CAD, which is connected to the machine, including two licenses (€18,000 net) If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Working area X: 3800 mm Working area Y: 1600 mm 5-axis electrospindle, HSK F63, air/liquid cooling Integrated drilling unit Multifunctional unit with four outputs Vertical drilling spindles approx. 10 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Fixed saw unit in X direction 12-position tool changer Tool changer located at the rear of the machine Worktable with 6 beams 1 vacuum pump Fpjdpfeynr Rpox Ag Djd Safety photocells Chip conveyor belt Includes vacuum pods and clamps for window frames, cutters/tools, and Cosmosoft software for window frame production.

Condition: used, machine/vehicle number: 008439, X axis working area: 3100 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 8.5 KW Number of controlled axes: 4 axes Total number of tool changer positions: 18 Fodpfxjyngzco Ag Dopd

Condition: used, Year of construction: 2000, The HOMAG BOF 31/40/G is an industrial CNC machining center designed for precise sizing, drilling, and milling of panel components in furniture manufacturing. BOF series machines are robust production centers suitable for both series and flexible manufacturing of furniture parts. This model is conceived as a universal production cell with options for automation and integration into HOMAG production lines. Fpedpfx Ageynb N Uo Ded

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working area 2,893 x 950 mm 6 traverses with 12 suction cups Milling spindle with ISO 30 tool holder, 3.6 kW, Drilling unit: 10 vertical drills 6 horizontal drills Grooving saw, 6-position tool changer. Control unit N500 Color display Total connected load: 10 kW Fodpfx Asymmr Ejg Dopd 400 V, 50 Hz

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,548 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 170 mm, workpiece length (max.): 3,540 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 160 mm, number of axes: 5, number of slots in tool magazine: 12, controller manufacturer: SCM, Equipment: documentation/manual, 5-axis CNC machining center with a very robust design (portal construction) Control via XYLOG and Maestro Extended working area in X-direction (comparable to approx. X5 HD 36) Fpsdpeymgllsfx Ag Ded Beam table, details (equipment): 12x TV MORBIDELLI suction cups X=145 Y=145 H=50 Support surface dimensions: 145 x 145 mm Suction cup height: 50 mm Integrated blanking valve 6x Rotatable TV MORBIDELLI suction cups X=145 Y=55 H=50 Support surface dimensions: 145 x 55 mm Suction cup height: 50 mm 6x Rotatable TV MORBIDELLI suction cups X=145 Y=30 H=50 Support surface dimensions: 145 x 30 mm Suction cup height: 50 mm Vacuum cups can be positioned using the laser system Tool changer traveling in X-direction, HSK 63 tool holder Chip conveyor, automatic central lubrication The drilling unit consists of: - 10 individually selectable vertical drilling spindles in X-direction - 8 individually selectable vertical drilling spindles in Y-direction - 4 horizontal spindles (2+2) for drilling in X-direction - 4 horizontal spindles (2+2) for drilling in Y-direction - 1 grooving saw unit (max. diameter 120 mm) in X-direction Safety fence (original Morbidelli provided); we use a custom safety solution for the machine, which has been accepted by BGHM. Both safety devices will be supplied. The machine is in very good condition. Demonstration possible by arrangement. Tools and tool holders shown in the photos are not included in the offer. A comprehensive range of tools/tool holders can be purchased on request. Offer is ex works Frankfurt am Main (EXW) Machine available immediately!

Condition: used, Year of construction: 2011, max. workpiece length 6000 mm Fpedjymf Eqspfx Ag Ded profile spindle 2 Stück main drive 18,5 kW Very well-maintained Homag Profi BMB 922/35/13/B CNC machining center with automatic loading and unloading For machining timber for windows, frame doors, or similar workpieces made of wood or wood-based materials. Detailed description in the accompanying PDF file! HIGHLIGHTS: ----- - Workpiece length up to 6000 mm (with regripping); Workpiece width up to 300 mm for machining individual parts, door leaves up to 1,300 mm on additional crossbeams, workpiece thickness up to 150 mm - Automatic loading and unloading of individual parts, buffer with 2 m depth - Automatic positioning of collets, automatic reclamping Interior/exterior profiling - 2 x 4-axis high-performance spindles with HSK 63 F taper with C-axis - C-axis extension for Flex5+ unit - Fixed drilling head with 13 spindles V9/H4: with 9 individually selectable vertical drilling spindles and 2 horizontal drilling spindles with dual output, 1 in the X direction and 1 in the Y direction - 18-position disc tool changer - 72-position chain tool changer - Additional console table for machining special forms and arches including various vacuum clamps and PowerClamp clamping system for the additional console table. With Lasersystem "Mr. Beam" - Vacuum pump - Chip conveyor belt - Including interchangeable units (saw unit, lock case unit, dowel drilling unit 3 + 1, drilling and milling unit 4 spindles, FLEX 5 unit) - OPTIONAL window tools: • Wooden windows IV 67/77/89 – Year 2011 • Front door IV 67/77/89 – Year 2011 • Lift-and-slide windows IV 67/77/89 – Year 2011 • Wood-aluminum windows 67/77 – Year 2018 • Wood-aluminum front door 67/77 – Year 2018 Machine in operation until approximately October 2026 and available for viewing! Detailed technical description, window cross-sections, and prices available upon request! aktuelles Video siehe nebenstehend/current video of the machine attached: Sequenzen Video: Minute 0:00 - 2:08: komplette Maschinenansicht_compplete machine view Minute 2:08 - 12:21: Fensterfertitung gerade Teile_window production straigth elements Minute 12:21 - 14:45: Sonderfensterproduktion Zusatztisch_special window production on additonal table (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 5-axis machining centre Working area X approx. 3200 mm Working area Y approx. 1800 mm Working area Z approx. 200 mm 5-axis electrospindle, power 12 kW 16-position circular tool magazine Max. tool diameter 250 mm (blade 350 mm) Vertical drilling heads: 11 Horizontal drilling heads X: 4 Fpodpfoyl Uz Eex Ag Djd Horizontal drilling heads Y: 5 Circular saw blade Becker Picchio 2200 vacuum pump, 90 m³/h Control panel Safety mats

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Working area X: 4520 mm Working area Y: 1600 mm Fsdpoyl Uw Hefx Ag Depd Working area Z: 300 mm 5-axis electrospindle unit, 12 kW power, liquid-cooled, HSK 63F interface Vertical drilling heads: 18 Horizontal drilling bits X: 4 Horizontal drilling bits Y: 2 Slotting saw in X direction 18-position tool changer (carousel) 1-position tool changer for saw blade Worktable with 8 bars WS8 clamping device, 200 mm Software: Campus V7 Plus CAD/CAM Vacuum pumps Safety platforms Red laser push button Remote control panel PC-based control system Automatic centralized lubrication

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 5-Axis Machining Center Biesse C9.50 - Beam table – Material can be clamped with suction cups or hold-down clamps Dual tool magazine configuration – highly flexible for production Top magazine – Revolver type Bottom magazine – Chain carousel (additional saw blade for HSK mounting – spindle) 8 beam tables, supports 16 kW spindle Very large aggregate/saw unit Becker pump Year of manufacture: 2009 Fpjdpfjyl Uuxjx Ag Dod

Condition: used, Year of construction: 2008, machine/vehicle number: 0901000, functionality: fully functional, input voltage: 400 V, actuation type: electric, overall weight: 5,900 kg, CNC - Masterwood - Project 5HL Fpedpfjyl Sn Asx Ag Dod

Condition: excellent (used), Year of construction: 2006, The machine is being sold on behalf of a customer. It is currently still connected and can be tested on site. We are also happy to send you a video of the machine. Further machine information will follow… Location: East Frisia region. Fsdpoyl Numefx Ag Depd