Ferrotall Máquinas Herramienta S.L.

Condition: excellent (used), Functionality: fully functional, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, table length: 1,000 mm, table width: 1,200 mm, spindle speed (max.): 18,000 rpm, table load: 2,500 kg, overall weight: 20,000 kg, spindle nose: HSK A63, FIXED PORTAL Numerical control Heidenhain 530i WORKING AXES CHARACTERISTICS: Translation stroke mm 1750 Transversal stroke Y mm 1400 Vertical stroke Z mm 600 Axis feed mm/min 35,000 Maximum acceleration m/sec2 6 WORKING AREA: Maximum horizontal passage mm 1200 OVERALL DIMENSIONS: Maximum height mm 3750 Dimensions of the basic module mm 5650x3350 Occupied area m2 22 ELECTROSPINDLE: Power kw 18 Torque Nm 80 Maximum rotation speed rpm 18000 Tool cone HSK-A63 MAX INSTALLED POWER: kW 55 Amp 135 TOTAL WEIGHT (APPROX.): Kg 20,000 ROTARY TABLE: Table surface dimensions mm 1000x1200 (Max. diagonal p 1300 mm) Table capacity kg 2500 Distance between the table and the spindle nose mm 2004-800 Maximum horizontal passage mm 1200 Maximum vertical passage mm 800 Height of the work surface from the ground mm 870 MACHINE COMPLETE WITH: -HEIDENHAIN NUMERICAL CONTROL TNC530i SINGLE PROCESSOR Monitor 15.1" TFT Graphical user interface Heidenhain optical scale measurement systems Interpolation capacity: up to 9 axes Type of interpolation: linear, circular, helical Block cycle time (BCT): minimum 0.5 ms Program coding language ASCII Programming language ISO, Heidenhain Storage unit: 6Gb hard disk FLEXK on-board machine programming Axis control techniques: Jerk, Look-Ahead, digital filters Integrated cycles for piece measurement and tool measurement Data transmission interfaces: RS232 at 115200 baud, RS422 at 115200 baud, Ethernet 100Base T (for use on 10Mb networks a speed reducer is required, at the customer's expense) Axis control: algorithm for High Speed Cutting (HSC) Remote control panel with HR410 electronic handwheel -CONTINUOUS MOVEMENT OF ROTARY AXES The workpiece table and milling head are continuous rotation axes allowing 5-axis interpolation machining. The mechanical structure remains unchanged while the motors and drives are sized for continuous rotation during machining. The technical characteristics remain unchanged with the exception of the torques of rotation which are the following: Rotary torque of the milling head: 410 Nm Rotary torque of the rotary table: 2500 Nm -30-Place HSK CHAIN TOOL MAGAZINE HSK-A63 cone Max. tool diameter with adjacent occupied positions 90 mm Max. tool length 300 mm Max. tool weight 10 kg Tool change time 15 sec -TOOL LUBRICATION AND COOLING System for lubrication and cooling of the tool through adjustable nozzles arranged around the spindle. Performance: Hjlhccowrnpwsqmofh Flow rate: 30 l/min. Pressure: 6 bar Filtering degree 100 pm Filtering is performed directly on the evacuator (ETDL or ETSL option) via a metal grid. -CHIP CONVEYOR WITH RIGHT OUTPUT Replaces collection tank at the exit of the augers -LASER PROBE AND SOFTWARE FOR CHECKING TOOL INTEGRITY AND MEASURING TOOL LENGTH AND RADIUS -DYNAMIC RTCP Dynamic RTCP software USED MACHINE

Condition: excellent (used), Year of construction: 1999, GANTRY MILLING MACHINE WITH PALLET CHANGER MIKROMAT 12VF 1999 Technical Data: Travel paths X: 3000 mm Y: 2400 mm Z: 1050 mm Hfjlhccqjwrd Ipsmeh Clamping area of the pallet: 1350 x 2000 mm Max. table load: 40 kN Table slot width/distance: 22 / 100 mm Passage width: 1400 mm Spindle speed: 6000 min-1 Mounting: SK50 Front spindle bearing diameter: 120 mm

Condition: excellent (used), Year of construction: 1997, KOLB VARIMAT VG 1997 SIEMENS CONTROL Technical data: Portal travel X: 11000mm Milling slide travel Y: 4000mm Milling slide stroke Z: 1000mm Free passage between the stands: 3700mm Holhowrdlusccqmjfh Clamping plate: 12000 x 3000mm T-slots 22H8, number 23, spacing: 500+/-0.1 Workpiece weight max. 5000kg Number of tools: 96 Tool diameter: max 125mm

Condition: good (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, table load: 25,000 kg, distance table to spindle center: 3,000 mm, New milling head spindle HSK-100 Hfjlhewq Thisccqmeh Siemens-840-D

Condition: used, Year of construction: 2014, X-travel: 1250mm, y-travel: 1280mm, z-travel: 150mm, max. feed rate: 15m/min, repeat accuracy: 0.01mm, spindle rotational speed: 0-24,000/min, software: VCarve Pro, data formats: HPGL-3D / G-Code, spindle power: 6.5kW, controls: Siemens Sinumerik 808D Milling, weight: 1.2t, with collet spindle, Phenol vacuum high-pressure table, 850W servo motors Yaskawa, steel base, precision ball screws in all axes, x-axis with dual drive, linear guides, protective cover for all drive axes, suction foot for chip extraction, automatic spray cooling and material sensor. Hfolhccjwqd Rhjqmjh

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, total length: 6,000 mm, total width: 6,200 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,600 rpm, total height: 5,200 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, Manufacturer/ Make: FOOKE Model/ Type: Endura Type 8 Year of manufacture/ YOM: 1999 Control: Siemens 840 D Powerline Tool holder/ Tool holder: HSK-A63 Max. speed/ max. rpm: 16,000 X-Way/ X-Way: 3000 mm Y-Way/ Y-Way: 2500 mm Z-Way/ Z-Way: 1150 mm A-Axis/ A-Axis: +/- : 100 mm C-Axis/ C-Axis: +/- : 181.5 mm Table size/ Table size: 3000 mm x 2500 mm Option/ option: Blowing air outside Helhswpqw Ejccqmjfh Kinematics/ kinematics: Clevis

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, table length: 6,500 mm, table width: 3,000 mm, table load: 17,000 kg, overall weight: 85,000 kg, controller model: Heidenhain, Gantry milling machine / Gantry milling center Hslewnqwpshccqmefh Nicolas Corres - Fox M 50 Year of manufacture: 2016 With coolant processing/filter system, chip conveyor Auxkal, 60-tool changer, 2 angle milling heads, 1 drilling head

Condition: excellent (used), Year of construction: 2016, operating hours: 2,842 h, Functionality: fully functional, machine/vehicle number: 196691, travel distance X-axis: 5,200 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 8,000 mm, spindle speed (max.): 6,000 rpm, travel distance W-axis: 1,000 mm, number of slots in tool magazine: 80, Commissioning only in 2019! TECHNICAL DETAILS Control: OSP-P300MA X-axis: 5,200 mm Y-axis: 3,100 mm Z-axis : 8,000 mm W-axis: 1,000 mm Effective width between columns: 2,650 mm Table surface to spindle nose: 0 to 1650 mm Table Working area: 2,500 × 5,000 mm Max load: 27,000 kg T-slots (width × distance): 24H7 × 180 mm Distance from machine base to table surface: 850 mm Spindle Speed range: 30 to 6,000 rpm Spindle motor: VAC 26/22 kW Spindle mount: BIG-Plus system Spindle indexing: 1° Spindle blow-off and cooling system: cooling through spindle, 2 MPa switchable high/low pressure, including air blow-off during rotation Feeds Rapid traverse: X: 30 m/min, Y: 32 m/min, Z: 20 m/min Hfelhccswnqmqsqmeh Cross rail feed W-axis: 3 m/min Cutting feed: 1 to 10,000 mm/min Tool changer Tool holder: MAS BT50 Pull stud: MAS P50T-2 Tool magazine capacity: 80 Max tool diameter: ø135 / 230 mm Max tool length: 400 mm Max tool weight: 25 kg Tool selection: fixed address Tool measurement: Auto Zero Offset with RMP60 from Renishaw Attachment heads Extension attachment L150: 6,000 rpm, 26 kW 90° angle head: 3,000 rpm, 22 kW Universal head B1C1-S6000 preparation: wiring and air hoses included, but without head and station Universal indexing head B and C axes 1°: 6,000 rpm, 7.5 kW, as an additional third station Additional station: expanded from 2 to 3 Functional extensions Slope Machining function: active Absolute encoders: XYZ axes Collision avoidance system: activated Machining Navi M-g II: without variable spindle speed control API Library 2: activated Virus protection system: OKUMA OSP-VPS Preparations and interfaces Preparation for NC rotary table Ø < 500 mm, 1 axis: for air-hydro version, no motor/encoder included Preparation for chip conveyor floor type, 2 pieces, front discharge: including wiring, power supply, operating panel, and collecting channel to the coolant tank MACHINE DETAILS Height: 6,020 mm Footprint: 6,680 × 12,830 mm Weight machine only: 42,000 kg Electrical connected load: 60 kVA Compressed air supply: 650 L/min at 0.5 MPa or higher

Condition: like new (used), Year of construction: 2012, Functionality: fully functional, WORKING RANGE Longitudinal (X) 4000 mm Holhcjwnc Ruocqmofh Vertical Ram (Y) 1500 mm Transversal Crossbeam (Z) 3500 mm Distance between columns 4500 mm Distance spindle nose table surface 1700 mm CNC CNC Heidenhain iTNC530 Measuring system optical scales SPINDLE Spindle power 30 Kw Rotation speed 20,000 Rpm Torque 85 Nm Taper HSK63 FEEDS Rapid X 30 m/min Rapid Y 30 m/min Rapid Z 30 m/min Notes Rapid head axes A/C 10 Rpm ATC Stations 32 Max. tool length 300 mm Tool attachment HSK63 WORKING PLANE Dimensions (LxWxH) 4000x3000 mm HEAD Spindle taper HSK63 A-axis +/-110 ° C-axis +/-200 ° Max speed 20000 Rpm Max power 30 Kw Coolant CTS EXTRA Total machine weight 52,000 Kg High pressure 15 Bar Losma filtering system Piece probe yes Tool presetting yes Use and maintenance books Yes Electrical diagrams Yes CE certification Yes Integral fairing + retractable upper cover Chip conveyor yes

Condition: excellent (used), Year of construction: 2019, operating hours: 3,551 h, Functionality: fully functional, machine/vehicle number: 0345, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,500 rpm, number of slots in tool magazine: 60, Machine powered at least until June 5, 2025 No reserve price - guaranteed sale at the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,600 mm Z-axis travel: 1,000 mm Distance spindle nose to table: 150 – 1,150 mm Distance table to gantry: 2,800 mm Control: HEIDENHAIN iTNC 640 Holhccjwm E S Seqmefh Table Table dimensions: 3,000 x 2,400 mm T-slots: 28 x 13 x 180 mm Table load: 11,000 kg Spindle and feed rate Max. spindle speed: 4,500 rpm Tool holder: BT 50 Feed rate X/Y axes: 15 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 7 m/min Rapid traverse Y-axis: 7 m/min Z-axis rapid traverse: 7 m/min Positioning accuracy: ±0.005 mm over 300 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 60 Hz Connected load: 65 kVA Total length: 9,000 mm Total width: 8,000 mm Total height: 5,500 mm Power-on time: 11,498 h Program run: 5,585 h Spindle hours: 3,551 h Axis travel time: 3,945 h EQUIPMENT - 60-station tool changer including BT 50 tool holders - 4th axis from DETRON - Coolant system - Chip conveyor - HEIDENHAIN iTNC 640 control

Condition: excellent (used), Year of construction: 2016, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC 530 spindle turning speed range 22000 U/min tool taper HSK A-63 spindle drive 60 kW headstock swivable +/- 110 ° c-axis 360 tool change unit 50 Pos. table dimension - longitudinal 2500 mm table dimension - cross 3250 mm coolant 40 bar weight of the machine ca. 60 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is in very good condition. The machine is immediately available Description: Technical data of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° incl. vibration sensor incl. bearing temperature sensor incl. rotary feed-through for internal KM feed IKZ 5-axis contouring control: Heidenhain iTNC 530/hand wheel HR520, 15" TFT colour display Keller Vario P1 extraction system Machine room roofing Tool changer 50-fold, chain magazine, behind the machine Chip conveyor, ejection 60° left, frontal Renishaw RMP60 measuring probe Blum laser tool measurement "Control NT-Micro" Clamping table Length x width x height 2500 x 3250 x 400 mm Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged lengthwise 18H12 T-slot spacing 250 mm Dimensions, weights Space requirement (without peripheral devices) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection values Voltage (three-phase current) 400 V Frequency 50 Hz Fuse see installation plan Power requirement see installation plan Compressed air connection (on-site) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine equipment) Linear axis drives Feed speed X-, Y-, Z-axis 60 m/min Axis acceleration X-, Y-, Z-axis up to 5 m/s² otary axis drives -VH30 Feed rate A-, C-axis 360 °/s Axis acceleration A-, C-axis 700 °/s² Resolution A-, C-axis 0.0001 Accuracy linear axes - according to VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeat accuracy X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of the measuring systems (interpol) A-, C-axis 0.0001° Rotary axis accuracy -VH30 Positioning accuracy A-, C-axis P= 12‘ = 0.0033° Repeat accuracy A-, C-axis Ps= 8’ = 0.0022° Milling head VH30 2-axis milling head: VH30, Milling spindle Siemens Weiss Spindle power S1 (100% ED) 60kW, Spindle speed 22,000 min-1, 95Nm, HSK-A63 Outer dimensions fork head L x W approx. 500 x 600 mm Nominal torque rotary axes control loop A: min. 1200 Nm C: min. 1047 Nm clamped A- and C-axis: 3000 Nm (permanent grease lubrication with automatic relubrication system) Swivelling axis - spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Hydraulic tool clamping Permissible tool weight 4.5 kg (manufacturer's specification) External and internal coolant supply Hjlhjwlvrmeccqmofh Coolant/lubricant supply (emulsion) at the front of the milling spindle with Belt filter system Volume 1500 l Pump 1: 40l/min at 20 bar Pump 2: 20l/min at 40 bar, Blown air at the front of the spindle

Condition: excellent (used), Year of construction: 2014, x-travel 8000 mm y-travel 3500 mm z-travel 2500 mm Control HEIDENHAIN iTNC530 spindle turning speed range 24000 U/min spindle drive 45 kW tool taper HSK A-63 tool change unit 50 Pos. table dimension - longitudinal 9500 mm table dimension - cross 3000 mm coolant IKZ 40 bar c-axis 360 ° headstock swivable +/- 110 ° weight of the machine ca. 84 t This ZIMMERMANN FZ 37-5 is in very good condition and immediately available. Description: ZIMMERMANN FZ 37-5 portal milling machine Year of manufacture: 2014 Control:Heidenhain iTNC 530 X/Y/Z-travel:8,000/3,500/2,500 mm Speed:25,000 rpm Tool holder:HSK 63 Spindle: Technology:Motor spindle Speed:25,000 rpm Power:45 kW Tool holder:HSK 63 NC swivel head: Technology:Fork head, VH 20 A-axis:+/- 110°, 0.001° C-axis:360°, 0.001° Clamping:Hydraulic Work table: Clamping surface:9,500 x 3,000 mm Maximum table load:5,000 kG/m² T-slots:18 H12 Distance:250 mm Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of tool places:50 pieces Tool diameter max.: 125 mm Dobl Sswh E Ezeznvascg Tool length max.:300 mm Equipment / accessories: Position measuring systems:Direct in all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 40 bar Workpiece measurement:Renishaw RMP 60 Tool measurement:BLUM Laser Set-up mode:Electronic handwheel Translated with (free version) Hfslhccswli Tqsqmoh

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, USED ASQUITH BUTLER STARCENTRE 250 - YOM 1998 - SERIAL NUMBER VPG 6055 MACHINE CONSTRUCTION, FEATURES & EQUIPMENT ▪ TRAVELLING GANTRY, FIXED BED CNC MILLING CENTRE WITH AUTO INDEXING MILLING HEAD & ATC ▪ MECHANICALLY UPGRADED & RETROFITTED WITH SIEMENS 840DSL CONTROL IN 2016 ▪ INTEGRATED EIMELDINGEN ROTATING MILLING TABLE CAP 2000 MM/10 TONNES WITH 3000 MM SUB TABLE ▪ ADDITIONAL HEIGHT INCREASER BASE FOR THE EIMELDINGEN ROTARY TABLE ▪ SIEMENS 840DSL CONTROL SYSTEM ▪ MECHANICALLY UPGRADED AND RETROFITTED WITH SIEMENS 840DSL CONTROL IN 2016 AT A COST OF OVER £200,000.00 ▪ 30.0 KW, 2.5 DEG x 2.5 DEG, 3,000 RPM, OIL COOLED AUTOMATIC INDEXING HEAD ▪ 60 STATION AUTOMATIC TOOLCHANGER ▪ GUARDING SYSTEM WITH SIDE FENCES. ▪ TWIN CHIP CONVEYORS. ▪ COLUMN MOUNTED OPERATOR STATION INCORPORATING OPERATOR’S PENDANT ▪ FLOOR PLATE & ADDITIONAL BOX TABLES TRAVELS Hfeljwkuttjhccqmjh Longitudinal Travel (X-Axis) 10,000 MM Cross Travel (Y-Axis) 3,000 MM Vertical Travel (Z-Axis) 1,350 MM Distance between columns 3,850 MM MAIN SPINDLE POWER Spindle Motor Power (S1 - 100% at Continuous Rating) 30.0 KW MILLING HEAD Head Type ORTHOGONAL HEAD Indexing Angle 2.5° x 2.5° Head Spindle Speed - Max 0-3,000 RPM Tool Taper BT50 Lubrication System OIL COOLED SLIDE FEEDS Working Feeds (X / Y / Z) 0 ~ 16,000 MM/MIN Rapid Feeds (X / Y / Z) 16000 MM/MIN AUTOMATIC TOOLCHANGER Tool Storage Capacity 60 TOOLS Maximum Tool Length 400 MM Maximum Tool Diameter - Full Magazine Ø 120 MM Maximum Tool Diameter - Adjacent Pockets Empty Ø 200 MM Maximum Tool Weight 25.0 K

Condition: used, Table 4000 x 2000 mm X-axis travel 4000 mm Y-axis travel 2350 mm Z-axis travel 850 mm Distance between columns 2250 mm Hjlswkqw Ijhccqmsfh SELCA control BT 50 tool Permissible weight on table 22,000 kg Machine dimensions (width x length x height) 6,000 x 12,000 x 5,000

Condition: used, Year of construction: 2018, travel distance X-axis: 2,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 50, Used CNC portal milling machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Storage location: Germany Delivery time: short term Payment: 100% before loading Warranty: none Machine description The KRAFT VM-2018B is a precise and powerful CNC portal milling machine with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining processes. Thanks to its robust design and high-quality components, it is ideal for demanding milling tasks in tool and mold making as well as in series production. Highlights & features Monoblock cast iron bed and cross beam for maximum rigidity and precision FEM-optimized machine design BF gearbox with 26 kW motor for high torque (662 Nm) Feed roller linear guides P-class (very low coefficient of friction 0.003-0.006) C3 ball screws with double nut - high load capacity & accuracy Spindle: SK50, 10. 000 rpm, direct drive Heidenhain TNC 620 control Spindle cooling & IKZ 20 bar Coolant system, oil separator, air conditioning for control cabinet Full enclosure, TÜV-approved, CE-compliant Technical data Travel (X/Y/Z): 2,300 / 2,000 / 1,000 mm Table size: 2,300 × 1,600 mm T-slots: 8 × 22 × 180 mm Max. Table load: 8 t Distance spindle nose - table: 180-1,180 mm Rapid traverse X/Y: 20,000 mm/min Rapid traverse Z: 15,000 mm/min Hslhswkg T Sjccqmofh Feed range: 1-10,000 mm/min Positioning accuracy (VDI/DGQ3441): 0.020

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Type of control: CNC Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Hfelhccowiwgajqmoh Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: new, Year of construction: 2025, Ref. -No.: 10463 Manufacturer: IGREK Type: FR 3500 XL Helewiwf Aohccqmjfh Year of construction: 2025 Type of control: CNC Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 6500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° C-Axis: 360 ° Turning Speeds: 12500 RPM Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Table-Size (Lxw): 2290 - 6490 x 3580mm mm Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Machine length: 11500 mm Machine width: 7400 mm Machine Height: 6600 mm Weight: 120 t Further information: IGREK FR 3500 XL – Precision and performance at the highest level The IGREK FR 3500 XL is a CNC-controlled 5-axis portal milling machine of the latest generation (year of manufacture 2024). It was specially developed for the demanding machining of large workpieces and impresses with its versatility and precision. With a modern control system from Siemens 840D or Heidenhain iTNC 640 and a robust construction, the machine offers optimal conditions for manufacturing in a wide range of industries. Key features: Large machining areas: With travel distances of 6,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine is ideal for machining large components. 5-axis simultaneous machining: The A-axis with a swivel range of +/- 115° and the C-axis with a rotation of 360° enable highly precise machining of complex geometries. Powerful spindle: The spindle reaches speeds of up to 12,500 rpm and a maximum torque of 235 Nm – perfect for demanding milling work. High stability: The machine weight of 120 tons and the table load of up to 4,000 kg ensure low-vibration machining even with heavy workpieces. Flexible tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and optimal process times. Rapid feed rate: High productivity is achieved with 30 m/min in the X, Y and Z directions. Technical data at a glance: Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool holder: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg The IGREK FR 3500 XL sets new standards in the machining of large parts. It is available immediately and offers comprehensive warranties and services directly from the manufacturer, internationally and across the board. Use the latest technology for your production – contact us for further details!

Condition: good (used), Year of construction: 2012, Ref. -No.: 10290 Manufacturer: KOLB KLUEPPELBERG Type: Cubimat YC 2000 Year of construction: 2012 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Machine number: 016453-20.1 X-Travel: 7000 mm Y-Travel: 4000 mm Z-Travel: 4000 mm W-Travel: 2.000 mm Hslhewiv Uisccqmjfh Speed work spindle: 4.000 RPM Max. Torque: 2.100 Nm Max. Workpiece Weight: 20 t Table-Size (Lxw): 2.800 x 2.000 mm Tool Taper: SK 50 Distance Between Columns: 3.200 x 4.000 mm Further information: 4 Milling Heads available.

Condition: used, Year of construction: 2000, x-travel 3.700 mm y-travel 3.050 mm z-travel 1.000 mm Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm 1.175 mm Hfslhccewg Hrgeqmeh rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Chip coveyor Ink. Internal cooling system 20 bar table-size 4.000 x 1.800 mm weight of the machine ca. 42 t

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Accessories included: 02 40110 Automatic loading (1 x) 03 20110 Packaging, transport, and installation (1 x) 04 50060 PHSF60 three-jaw precision manual chuck (1 x) 05 50500 Barcode scanner (1 x) 06 30120 qs-STAT measurement data export (1 x) 07 30300 24-month warranty extension Hfelhccswgw Swoqmeh

Condition: like new (used), Year of construction: 1996, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 6000 x 2000 mm Number of T slots: 13 T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mm Y axis traverse: 3800 mm Z axis traverse: 1000 mm Vertical capacity (VC): 500 / 1500 mm (direct exit) Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) & Direct spindle Tool clamping system: Hydraulic Taper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-96872 Speed range: 3000 rpm Spindle power: 30 kW Feedrates Hfslhccqewfunyemeh Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 Kg Maximum weight on table: 15000 kg Machine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fence Head changer: automatic with lateral hinge/support in column Chip conveyor: 2 longitudinal pallets Electronic handwheel: New HR-510 Coolant: External & Internal high pressure through spindle (internal only with direct exit head) Sales conditions Guarantee: 6 months mechanical spare parts Sale conditions and price: On request View all technical features

Condition: excellent (used), Year of construction: 2008, Control: Heidenhain iTNC530 with handwheel Working ranges X-axis: approx. 3,000 mm Y-axis: approx. 6,000 mm Z-axis: approx. 1,250 mm The milling head can be adjusted using the control (A-axis)! No machine table! Milling spindle (new!) Type: HSD ES951 Adapter: HSK63F Cooling: Air Clamping: Pneumatic Maximum speed: 24,000 rpm Power: 10 kW Torque: 8.7 (S1) and 10.5 (S6) Suitable materials: Wood, plastic, aluminum Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s2 Connection data Connected load: approx. 25 kW Back-up fuse: 42 A Dimensions, weight Machine space requirements: approx. 5,500 x 9,000 x 4,500 mm Total weight: 96,000 kg Machine condition Hfjlhccewffyyoqmeh Fully functional, no longer in use Under power since dismantled and stored. Available immediately!

Condition: excellent (used), Year of construction: 2002, operating hours: 146,161 h, Functionality: fully functional, operating hours of spindle: 4,486 h, First commissioned: 2002 Control: Fidia C20 with HPX control panel X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping area: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Hfjlhcjwdv N Aocqmsh Tool clamping: hydraulic Minimum quantity lubrication: External Linear axis drives X-, Y-axis feed rate: up to 20 m/min Z-axis feed rate: up to 20 m/min X-, Y-, Z-axis acceleration: up to 1.5 m/s2 Connection data Connected load: 40 kW Back-up fuse: approx. 80 A Dimensions, weights Space requirement (machine with peripherals): approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Color Housing, gantry, control cabinet: light gray Milling head and applications: turquoise Additional equipment - 18-position chain tool changer - 3-sided housing, without extraction ducts Optional for an additional charge: - Wired measuring probe Machine condition Fully functional, in very good condition. Available from 01.05.25 and still powered until the end of June 2025.

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D Hfoljwc A Shohccqmeh autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 coolant attachment, chip conveyor *

Condition: excellent (used), Functionality: fully functional, 3 machines available in stock: WORKING CAPACITY Longitudinal (X) 2300 mm Vertical (Z) 800 mm Cross (Y) 1600 mm Distance between columns 1672 mm CNC CNC Heidenhain 430 HEAD 1 Type TULCE Spindle taper HSK63A A axis 360.000x0.001 ° C axis 360,000x0,001° Max speed 18000 Rpm Max power 20 kW Coolant CTS 20Bar FEEDS Rapid X 35 m/min Rapid Y 35 m/min Rapid Z 35 m/min TABLE Floorspace (LxWxH) 2500x1200 mm Capacity 8000 Kg ATC Positions 40/72 HEAD 2 Max speed 10000 Rpm Max power 44 kW EXTRA Total power supply 63.2 kW Machine total weight 41300 kg High Pressure 20Bar Helhccswcytvjqmofh CE Certification Yes The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!