Sun Works GmbH

Condition: used, TWO ROLLS BAR STRAIGHTENER PBVR6 Manufacturer: BRONX Kwedpfxoymcn Ao Ah Eju Capacity - Bars with tensile strength of 600 N/mm²: Ø 15 - 110 mm - Bars with tensile strength of 700 N/mm²: Ø 15 - 100 mm - Bars with tensile strength of 1.000 N/mm²: Ø 15 - 85 mm Roll angle adjustement: 10 to 20 degrees Working direction: Right to Left Scope of supply - Entry chanel - Duo introduction - Straightener - Exit chanel Bars with tensile strength of 600 N/mm²: Ø 15 - 110 mm Bars with tensile strength of 700 N/mm²: Ø 15 - 100 mm Bars with tensile strength of 1.000 N/mm²: Ø 15 - 85 mm Roll angle adjustement: 10 to 20 degrees Working direction: Right to Left

Condition: used, Straightener & polishing machine WRPT2, manufactured by KIESERLING Ksdpfsymcm Eox Ah Eowu Bars diameter : 10 - 35 mm Bars length : 3 - 6 m Scope of delivery includes : 1. Infeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller 2. WRPT2 straightening machines, made KIESERLING with - 2-roller straightener with upper roller height adjustment and upper/lower angle adjustment - Two geared motors with cardan shaft drive - Infeed guide - Side guide support - 1 set of side guides 3. Outfeed pinch-roll with - Motorised bottom roller - Vulkollan upper roller 4 Electric control panel with manual movement buttons Bars diameter: 10 - 35 mm Bars length: 3 - 6 m

Condition: used, Bar straightener WRPF 35-50, made by KIESERLING Bar diameter : 8 - 50 mm Speed : Up to 50 m/min Kodoymcmrjpfx Ah Eswu Scope of supply includes : - Bar Loading channel - Input pinch-roll - Straightening machine WRPF35 - Exit pinch-roll - Bar Output channel - Electric equipment. (Option: NEW with HMI control desk) - Existing spare parts - Documentation - Optional: Loading table - Optional: Unloading cradle Bar diameter: 8 - 50 mm Speed: Up to 50 m/min

Condition: used, BAR PEELING MACHINE manufactured by LANDGRAF Model T100 Working range : Diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/min Kodpfx Asymb U Ush Eowu Complete line with : Loading table with chain transfer Entry Roller Way, adjustable Exit Roller Way, adjustable Electric equipment Hydraulic power pack Bar diameter: 20 – 100 mm (finished diameter) Tolerance: h9 Bar Length: 1.900 – 6.500 mm Peeling head: 320 – 2.400 rpm Speed: up to 40 m/min

Year of construction: 2025, condition: refurbished (used), Complete peeling line WDHF35/50/75 AS NEW, revamped & tested in our workshop. Function and h9 tolerance guaranteed. Working range Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Bar length min.: 2,9 m (3,2 m at max. feeding speed) Bar length max.: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Kedeymb Uuspfx Ah Eewu Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable Scope of supply KIESERLING WDHF 35/50/75 as described above, composed by: - Entry roll conveyor - Feeding rolls - Peeling machine - Exit carriage - New output pinch-roll - Exit channel - Revamping in our workshop - New hydraulic system - New lubrication system - New pneumatic - New electrical equipments - New complete set of tooling & consumables SAAR-HARTMETALL - Optionnal: Laser diameter control system for tool correction Entry diameter: 7 - 38 mm Finishing diameter: 6 - 35 mm Minimum bar length: 2,9 m (3,2 m at max. feeding speed) Maximum bar length: 6,5 m Feeding speed: 4 - 50 m/min progressively adjustable Cutting head RPM: 675 / 1330 / 4500 rpm progressively adjustable

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ATM Model: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine ATM Brillant 255 – Year of manufacture 04/2019 Industrial unit designed for precise material sectioning in metallography, laboratory, and materials testing applications. The machine comes with a base cabinet and integrated coolant system. Several suitable cut-off wheels are included (see photos). Very robust professional quality Technical Data (as per nameplate): Model: Brillant 255 Year of manufacture: 04/2019 Manufacturer: ATM GmbH Electrical Data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse protection: 32 A Mechanical Data: Cut-off wheel: Ø 400 mm Kjdpfx Aheymbzue Ejwu Max. wheel speed: approx. 3050 rpm Wheel bore: 32 mm The machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, please feel free to contact us by phone.

Year of construction: 2024, condition: refurbished (used), Tube Straightener 6V1+1 90×5, made by CARTACCI Recently revamped Tube diameter size : 12 – 90 mm Wall thickness : 0,8 – 5 mm Tube length : 4 – 12 m Straightening force : 16 Mp Straightening precision : 0,5 mm/m Speed infinitely variable : 0 – 100 m/min Diameter: 12 – 90 mm Thickness: 0,8 – 5 mm Length: 4 – 12 m Straightening force: 16 Mp Straightening precision: 0,5 mm/m Kwsdpfxsyma Hvj Ah Eou Speed: 100 m/min

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 4 - 12 m Kwedpfx Aeyma Adoh Eou INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn

Year of construction: 2025, condition: refurbished (used), OFF-LINE Packing line .90.4.F Made by MAIR Kodpfxeymav Rs Ah Eewu Revamped 2025 Scope of supply: 1 New chain transport system, with 4 lifting chains, to collect the tubes from the roller conveyor. 2 Automatic tube by tube feeding unit 3 Single Row preparation section 4 Automatic bundle formation unit, with interchangeable: - 4 Bundle holding support for square bundle - 4 Bundle holding supports for hexagonal bundle 5 Strapping bridge with manual strapping unit Signode 6 Movable carriage for frontal extraction of finished bundle 7 Finished bundle storage unit 8 New Electrical control panel with operator control desk 9 New emulsion draining & bundle weighting system Tube diameter (Round): 16 - 90 mm Tube diameter (Square): 16×16 – 80×80 mm Tube diameter (Rectangular): 20×16 – 80×40 mm Squares bundles: 250×250 – 500×500 mm Hexagonal bundles (size of side): 150mm – 350mm Bundle weight: Max. 2Tn

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min Kedpfx Ahoymaute Eowu

Condition: used, Complete entry line, made by OTO MILLS - Double Decoiler with bottom/top hold-down roll - Strip peeler & Pinch-roll - Automatic strip joiner - Extra-sized horizontal accumulator Scope of supply includes: Double Uncoiler AD508SD - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Pinch-Roll and flattener PRS566 Kwsdsymatijpfx Ah Eeu - 3+2 rolls - Hydraulic roll positioning OTO Mills 100% automatic butt-welding unit GG566 - Complete automatic joining and welding process - Strip exit table with encoder - Motorized strip exit Pinch-roll OTO Mills Horizontal Accumulator - Heavy Duty horizontal accumulator - Motorized Feeding Pinch-roll – 106 KW - Rotating table with Main motor 106Kw - Approx. 6,5 meter external table - Exit strip guiding Turret OTO Mills Tube diameter: 76,1 - 168,3 mm Material thickness: 2 - 6.3 mm Double Uncoiler: AD508SD Pinch-Roll and flattener: PRS566 100% automatic butt-welding unit: GG566 Accumulator: Heavy Duty horizontal accumulator

Condition: used, OTO MILLS ACCUMULATOR HA506RT Strip size up to 500mm x Max. 6.0mm Working range · Strip width: Max. 500mm · Thickness: 1.5 – 6.3mm · Material: HR, Galvanized, Pickled Horizontal Accumulator · Heavy Duty horizontal accumulator · Motorized Feeding pinch-roll · Pinch-roll motor and transmission DC 106 KW · External ring rotating table Kjdjymarxjpfx Ah Ejwu · Main motor rotating table DC 106Kw · Approx. 6 meter external table with vertical rolls · Inner ring Strip passage · Strip Passage tower · Top and bottom strip guiding rolls Control panel · 1 panel for control of the accumulator Strip width: Max. 500mm Thickness: 1.5 – 6.3mm Material: HR, Galvanized, Pickled

Condition: refurbished (used), 100% REVISED IN 2024 PROCESSING CENTRE FOR DEBURRING & CLEANING OF SHORT TUBE RSA RASAPLAN NV & RASACLEAN SK Kwedpfx Aheymarfj Esu Scope of supply: 1. RSA automatic loading system for short pieces 2. Deburring system RASAPLAN N00; 3. RSA cleaning system RASACLEAN SK for short pieces Complete line RSA for short size/diameter tube with loading , deburring, washing. Thickness: 3 mm Pieces length / fixed lengths: 40 – 120 mm Length tolerance: 0,5 mm Deburring system: RASAPLAN NK V 500

Condition: used, ZINC-COATING PLANT FOR PIPES , made by VOEST ALPINE / LOECO Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Kwjdpfxoyman He Ah Eju Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444 Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444

Condition: used, Industrial shredder chopper Kodpfx Aoymaiqoh Eowu This industrial shredder / bead chopper is a simple, robust, and versatile solution designed for the efficient volume reduction of your metallic waste, such as: - Metal scraps - Continuous welding beads - Other compatible metallic waste for industrial recycling. Its power allows it to shred, chop, and fragment various types of industrial waste, facilitating their compaction, waste management, and preparation for industrial recycling. SPECIFICATIONS Shredding: Designed to handle constant flows of metallic waste, optimizing your recovery and recycling operations. Blade access opening: A wide opening of 402 x 502 mm to facilitate the feeding of various materials. Blade configuration: Equipped with 1 blade shaft of 25 mm width, designed for effective and uniform chopping. Shaft rotational speed: Operates at 35 r.p.m., offering an optimal balance between shredding power and efficiency. Voltage: Prepared for standard 400/50 Volt/Hz connections. Weight: At 500 kg, this is a solid and durable machine, built for intensive industrial use. Blade access opening: 402 x 502 mm Number of blade shafts: 1 unit Blade width: 25 mm Shaft rotational speed: 35 r.p.m. Voltage: 400/50 Volt/Hz Weight: 500 kg

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: Kwedpfx Aheymahyo Eeu - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS25 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 25 Mp Number of strokes: 800/min Diameter for round point: 10 - 75 mm Kwedpfxsymaduo Ah Eeu Diameter for folded point: 18 - 100 mm Diameter of reduced section for both point types: Max. 50 mm Feed speed, infinitely variable: 0 - 70 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS63 Valid for: Hot and cold pointing Feeding: Automatic and manual Kwedpfsymadnsx Ah Eou Forming capacity: 4 x 63 Mp Number of strokes: 630/min Diameter for round point: 15 - 115 mm Diameter for folded point: 28 - 150 mm Diameter of reduced section for both point types: Max. 75 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS40 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 40 Mp Number of strokes: 710/min Diameter for round point: 12-90 mm Diameter for folded point: 20-120 mm Ksdpfx Ahjymadhs Eewu Diameter of reduced section for both point types: Max. 60 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS100 Valid for: Hot and cold pointing Feeding: Automatic and manual Forming capacity: 4 x 100 Mp Kjdpsymac Rjfx Ah Eewu Number of strokes: 560/min Diameter for round point: 20 - 170 mm Diameter for folded point: 35 - 200 mm Diameter of reduced section for both point types: Max. 110 mm Feed speed, infinitely variable: 0 - 100 mm/sec

Condition: used, MTM Strip accumulator AN65 TECHNICAL SPECIFICATIONS Max. strip width: 420 mm Kwedpfx Ahjymac De Eeu Strip thickness: 0.9 - 5 mm Pinch-roll motor power: 56 kW Rotating table motor power: 70 kW SCOPE OF SUPPLY Motorised inlet pinch-roll with strip guiding unit External rotating table Internal ring Exit Deviator roll Electrical cabinet and operator control panel: · 1 Complete electrical cabinet with PLC control and TDE MAGNO drives for the motors · Complete operator panel with HMI · Safety copy of PLC program + Safety copy of HMI program + Safety copy of TDE MAGNO Parameters Max. strip width: 420 mm Strip thickness: 0.9 - 5 mm Pinch-roll motor power: 56 kW Rotating table motor power: 70 kW

Year of construction: 2017, condition: refurbished (used), Tube pointing machine AVS-25, made by KIESERLING Kedpfjymacwsx Ah Ejwu - Initial diameter : 15 - 75 mm - Pointed diameter : 10 - 50 mm - Force : 25 tons - Cycles per minute : 800 - Introduction speed adjustable without steps : 0 – 70 mm/s - Model of introduction duo : R25 - Tools : Rotating hammers Model of introduction duo: R25 Tools: Rotating hammers

Year of construction: 2023, condition: used, VIOLI Drawing Bench VM/TRI25-3s Manufactured in 2023 The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful Length: 3 Meters Pulling Power: 2,500 kg Drawing force: Max. daN 2500 Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min. - Max. 17 m/min. Drawing reduction: Around 15% of the section Clamping force POINTER: 100 Ton Tolerance: 1 mm Power supply: 400 V - 50 Hz Electric power: 9,2 KW Hydraulic oil: ISO 46 Motor Power: 9.2 kW - 380 V, 50 Hz Noise: At the workplace LP < 70 dB(A) Hydraulic System: Proportional hydraulic pump Carriage Sliding: with ball circulation guides Construction and movable installation of a hale holder to house 1 O hales in line with the trolley; Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank; Adjustable Die holder; Bar support system; Tank with pump for lubrication; Opening/ closure of pliers operated manually by pneumatic pistan; Compliance: Machine comply with the UE conformity regulations. DETAILED FEATURES Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke. Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke. Pulling Power: The pulling power is in line with the drawing die. Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics. Tolerance: The tolerance is 1 mm. Hydraulic System: Features a proportional hydraulic pump. Motor Power: 9.2 kW - 380 V, 50 Hz. Carriage: Carriage sliding with ball circulation guides. Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley. Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank. Die Holder: Adjustable. Bar Support: Includes a bar support system. Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston. Control Panel: The machine is equipped with a control panel FUNCTION The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section. COMPOSITION OF THE DRAWING BENCH The machine is composed of the following main components: - Metal structure - Carriage equipped with a hydraulically controlled clamp - Carriage drive unit - Hydraulic system - Electrical system Metal structure Kwodjyl U Sqjpfx Ah Eju The metal structure is composed of a recirculating ball guide. At the end of the rails, a suitable sized plate supports t...

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: · Accumulating table for single-tube extraction via chain conveyors · Walking beam system for synchronized transport of two tubes · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Technical data · Manufacturer: MAIR · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Kwsdpfeyl Upvox Ah Eou Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Condition: used, OTO MILLS Vertical accumulator FLOOP FR321 The FLOOP OTO FR321 is a vertical strip accumulator designed to ensure a continuous and stable strip feeding process in welded tube mills and roll-forming lines. Its system allows the accumulator to be filled both while the line is running and while it is stopped, significantly reducing coil change time. It is a robust and reliable solution for high-speed production environments. Kjdpsyl Un Sefx Ah Eswu Technical specifications Manufacturer: OTO MILLS Model: OTO FR 321 Strip thickness: 1.0 – 4.0 mm Strip width: 38 – 325 mm Yield strength: 270 – 400 N/mm² Maximum line speed: 160 m/min Maximum loading speed: 500 m/min Accumulation capacity (depending on thickness): up to 600 m Maximum strip elongation: 15 % Pinch-roll drive power: 75 kW Scope of Supply Complete OTO MILLS FLOOP FR321 vertical accumulator Existing mechanical spare parts Set of spare parts for conversion to AC drive (currently operating on DC) Strip thickness: 1.0 – 4.0 mm Strip width: 38 – 325 mm Yield strength: 270 – 400 N/mm² Maximum line speed: 160 m/min Maximum loading speed: 500 m/min Accumulation capacity (depending on thickness): Up to 600 m Maximum strip elongation: 15 % Pinch-roll drive power: 75 kW