Numa

Condition: good (used), Year of construction: 2000, Used CNC lathe by Emco Padovani Ncodjzhaixjpfx Aiyju Type Emcomat E 300 x 3000 Fagor CNC control system Turning diameter over the bed: Ø 550 mm Turning diameter over the cross slide: Ø 340 mm Distance between centers: 3000 mm Double chuck, front: Rota with quick-change jaws Spindle nose: Camlock 8 Maximum spindle speed: 2500 RPM Tool holder: 4-way Parat Gr. 3 Includes 2 steady rests, various tool holders, and chuck jaws.

Condition: used, Year of construction: 2022, machine/vehicle number: 710370, travel distance X-axis: 180 mm, j.stumpf [at] ivg.auction Machine data • Year of manufacture: 2022 • Serial number: 710370 Travel distances • X-axis: 180 mm • Z1-axis: 260 mm Ncodszgrw Eepfx Aiysu • Z2-axis: 292 mm Tool system • Tool changer: 12-position • Tool holder: VDI 25 Additional units • Compressed air filter unit GÖRING DSL 02D-SF-2-MBL, nominal flow rate approx. 900 m³/h • Cooling unit HYDAC RFCS-AH-030, year of manufacture 2021, serial number 2300040370 • Hydraulic unit KNOLL TG 30-04/07533-1, year of manufacture 2022, serial number 1570792 • Hydraulic cooling unit BKW ET22V-134-B-DI, year of manufacture 2022, serial number 834179 • Chip conveyor KNOLL 320 S-1/225, year of manufacture 2022, serial number 2204044

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Ncedezghc Depfx Aiyeu Helical machining. Tool wear offset function. Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Condition: used, Year of construction: 2024, XYZ 1530VS x 730mm Gap Bed Manual Lathe with DRO, Swing Over Bed 390mm, Swing in Gap 610mm, Spindle Speed 20-2500rpm, Spindle Bore 54mm, Tailstock. Serial No. 11388443 (2024) Ncodpfx Aozgfb Rjiyou Location: These lots are located in Rhayader, Wales, UK.

Condition: used, Year of construction: 2024, XYZ 1550VS x 1230mm Gap Bed Manual Lathe with DRO, Swing Over Bed 390mm, Swing in Gap 610mm, Spindle Speed 20-2500rpm, Spindle Bore 54mm, Tailstock. Serial No. 11308450 (2024) Location: These lots are located in Rhayader, Wales, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Nodpfxezgdz Ao Aiyscu

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: Sinumerik ONE, _____ Ncsdszf T I Ajpfx Aiysu Description: Year of manuf. : 2024 Control : Siemens Sinumerik ONE Turning diam. : 500 mm Turning length : 1300 mm Mainspindle: Technology:Belt-driven spindle Speed (max.):2.500 rpm Power (max.):42 kW Torque (max.):1.040 Nm Barcapacity:95 mm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-400-128 Toolcarrier (X/Y/Z): Technology:Turret with 12 stations Taper:VDI40 Tooldrive:4.000 rpm, 8 kW, 45 Nm Movement in X/Y/Z:318/140/1.360 mm Rapid travers in X/Y/Z:24/12/30 m/min Tailstock: Technology:Towed Tailstock (programmable) with hydraulic Sleeve Stroke:120 mm Sleeve-ø:100 mm Cone:MK4 Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with High-pressure, 14 bar Toolbreakagecontrol:Electrical Oilmistseparation:Mechanical extraction, LOSMA Icarus IM Setup operations:Electronic Handwheel Further Accessory:Status lamp, Rinsing pistol

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, FOR SALE: Exceptional Lot of 4 DOOSAN Puma 2600S CNC Lathes A rare opportunity on the used market! Ideal for immediately increasing your production capacity or upgrading your machine park. We offer a consistent lot of 4 CNC lathes with 2 axes (X, Z) from the reputable DOOSAN brand, known for their rigidity, precision, and longevity. 🛠️ COMMON FEATURES OF THE RANGE: Brand / Type: DOOSAN Puma 2600S (Note: "26005" is understood as a variation of the standard Puma 2600 model) Kinematics: 2 robust axes (X, Z) CNC Control: FANUC CNC (industrial reliability, easy to learn) Compliance: Original CE certificate available for each machine Documentation: Technical manuals and operating instructions included 📦 DETAILED COMPOSITION OF THE LOT (4 MACHINES): Doosan Puma 2600S Lathe — Ref. A072 Year: 2012 Equipment: Sold complete with its chip conveyor, documentation & CE certificate. Doosan Puma 2600S Lathe — Ref. A074 Nodpfjzd R E Njx Aiyecu Year: 2012 Equipment: Sold complete with its chip conveyor, documentation & CE certificate. Doosan Puma 2600S Lathe — Ref. A076 Year: 2013 (Newer) Equipment: Sold complete with its chip conveyor, documentation & CE certificate. Doosan Puma 2600S Lathe — Ref. A077 Year: 2012 Equipment: Sold complete with its chip conveyor, documentation & CE certificate.

Condition: used, Year of construction: 2023, operating hours: 647 h, functionality: fully functional, CNC lathe Hyundai WIA HD2600 – Year of manufacture 2023 – Top condition For sale is a CNC lathe Hyundai WIA HD2600 from 2023. Technical data: Manufacturer: Hyundai WIA Model: HD2600 Year of manufacture: 2023 Operating hours: only 647 h Condition: very good condition, almost new Chuck: SCHUNK Ø 400 mm Sale can include the chuck upon request Nodpfx Aezdcinjiyscu The machine has been used very little and is in excellent technical and optical condition. It is ready for immediate use and can be inspected by appointment. Advantages: Very low operating hours Powerful and precise CNC lathe High-quality SCHUNK chuck Ø 400 mm Immediately available We are happy to provide you with further information, technical details or a customized offer. Parameter Value Max. turning diameter 460 mm Max. turning length 659 mm Diameter of rotation over bed 630 mm Diameter of rotation over slide 460 mm Spindle bore 91 mm Max. bar diameter 80–81 mm Spindle speed 3,500 rpm Spindle power 26 / 18.5 kW Spindle torque 734 Nm Spindle nose A2-8 X-axis travel 265 mm Z-axis travel 680 mm Rapid traverse X/Z 24 / 30 m/min Turret 10 stations Tool holder 25 mm / Ø50 mm Tailstock MK5 (Morse taper 5) Machine weight approx. 5,800 kg

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC-Steuerung Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Ncedpszc Dzvsfx Aiyou Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. 2022 (Repairs/renovations performed by WEILER service technicians): - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted - Spindle bearings and timing belt of the X-axis replaced - Bearing unit of the Z-axis replaced - Scraper replaced - Reference points adjusted - Test run performed Ncsdpfezcv Egjx Aiyeu

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 87350 € 1650.92 € 540 mm 1500 mm 85 mm 310 mm 350 mm D1-8 1/20 MK 3 27 - 2250 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6 40%) kW 0.02 mm 0.016 mm ISO3655 3340 mm 1905 mm 2235 mm 3400 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software Large spindle bore, with precision bearings for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis. 2-axis AC servo motors 50-300 mm roller-type tailstock. Manual tailstock quill, diameter 75 mm (MK5), travel 190 mm. Programming and operating instructions. Electronic handwheel for X and Z axes Manual 4-station tool holder (25 x 25 mm) Automatic lubrication system Fully enclosed splash guard with sliding door and window Chip container with coolant tank Inspection report LED work light Coolant system Preparation for oil cooling system OPTIONS (PRICES ON REQUEST): Fagor control system instead of Siemens Manual or hydraulic chuck 8-station turret, optionally with driven tools Electrically rotatable 4-station tool holder Chip conveyor High-pressure coolant pump Ncodpfjzbvabsx Aiyju Further options on request ALTERNATIVE: FCL-2140 variant with 1000 mm centre distance FCL-2180 variant with 2000 mm centre distance

Condition: used, Year of construction: 2006, turning diameter 500 mm turning length 1300 mm control Fanuc 18i TB main spindle: Ø95mm mit C-ACHSE turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min x-travel 318 mm z-travel 1360 mm tailstock quill taper MT 4 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Ncedpfxjzawlco Aiysu subject to prior sale reserved!

Condition: used, Year of construction: 2004, XYZ Proturn VL 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2004) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2004 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Ncsdpozav N Tjfx Aiyju 3 Toolholders TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79196 Machine Serial Number: SL091 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2000, Technical details Turning Speeds 30 - 3.000 RPM Bar passage 160 mm Chuck diameter 305 mm Swing diameter over bed 700 mm Swing diameter via support 480 mm Turning Diameter 550 mm Turning Length 1050 mm Spindle passage 102 mm Spindle Bore 125 mm Spindle nose A2-8 Spindle power 16 kW Rapid Travel Speed X-Axis 16.000 m / min Rapid Travel Speed Z-Axis 20.000 m / min Travel -X Axis Ncsdpfezagqnsx Aiyju 362 mm Travel -Z Axis 1105 mm Max. Rod diameter 91 mm Quills Morse taper MT 6 Number of tool stations 12 pc Qty of live tools 3 pcs

Condition: excellent (used), Year of construction: 2018, Hyundai vertical turning center, Type WIA LV500RM Year: 2018 Ncsdoy S Sihopfx Aiysu CNC: Fanuc Turret: BMT 75 Chip conveyor Tilting and fork-liftable chip bin (Goubard)

Condition: excellent (used), Year of construction: 2017, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2017) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Ncjdpfxey R Rdhe Aiysu Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Indexing Toolpost Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. 3 Point Fixed Steady Travelling Steady Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79001 Machine Serial Number: SLM00072 £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 360 mm, spindle speed (max.): 2,000 rpm, Used teach-in lathe COMEV Leonardo CM-300 x 2000, year 2001, CNC control D.Electron CN-Z32. Machine in good working condition, complete with tailstock, coolant tank with pump, manuals, electrical diagrams, and CE Declaration. Nedpfsy R Ddusx Aiyscu Main features: • Centre height: 300 mm • Max turning diameter over bed: Ø 600 mm • Max turning diameter over carriage: Ø 360 mm • Distance between centres: 2,000 mm • Spindle bore: Ø 110 mm • Spindle speed: 2,000 rpm • Main spindle motor power: 12.5 / 18 kW • 4-position electronic turret

Condition: used, Year of construction: 2012, turning diameter 550 mm turning length 1500 mm Njdey N D Siopfx Aiyscu control Fagor 8055 x-axis 108 mm z-axis 3000 mm

Year of construction: 2006, operating hours: 19,067 h, condition: used, total length: 5,100 mm, total width: 2,800 mm, total height: 2,900 mm, Colour: Grey Empty weight: 13.700 kg Price: On request Turning and milling center Total: 9-axes, B-Axis, Y-Axis, C-Axis Automatic product feed with controlled arm from Pneumotec Automatic bar feeder from LNS Quick Load Servo III Sub-spindle VAC-MB11 4500 rpm Milling head with automatic tool changer and 44 ATC units Lathe turret: 12 ATC units Chip conveyor - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 122616 - Operating hours: 19067 - Drive system: CNC - Control system brand: OKUMA-OSP - Control system type: OSP P200L - Power [kW]: 22.0 - Swing over bed [mm]: 550 - Distance between centres [mm]: 1500 - Spindle bore [mm]: 80 - Options: Turret, Live tools, Bar feeder, Three-jaw chuck, Tool magazine, Chip conveyor, C-axis - └ Tool magazine [pcs.]: 44 Njdpfx Aoy N Dt Hjiyscu - X-axis travel [mm]: 500 - Y-axis travel [mm]: 95 - Z-axis travel [mm]: 1650 - Tool holder: HSK-F63 - Type of bar feeder: LNS Quick Load Servo III - Transport dimensions: 5100mm x 2800mm x 2900mm (l x w x h) - Transport weight [kg]: 13700kg - Transport packages [pcs.]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Njdpfoy Nytpex Aiyscu Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Year of construction: 2004, operating hours: 9,203 h, functionality: fully functional, machine/vehicle number: 8040939522C, total height: 2,276 mm, total length: 6,205 mm, total width: 2,214 mm, overall weight: 12,000 kg, OTHER MACHINES ARE ALSO AVAILABLE FOR SALE; PLEASE INQUIRE. Ncedpoy I U Uljfx Aiysu This offer concerns a high-quality CNC turning machine, type Gildemeister CTX 620 Linear, manufactured in 2004. In 2025, the machine underwent a comprehensive overhaul and technical refurbishment, with various components being replaced. This overhaul, performed by DMG Used Machine, cost 60,000 euros alone. Here is a brief overview of the work carried out during the overhaul: - Restrofitting of a steady rest (SMW) (clamping range 90-350mm) - Replacement of the energy guide chain (Z-axis) - Replacement of all components in the energy guide chains X and Z (cables, hoses, fittings, etc.) - Repair of the tailstock The machine has a 12-position tool turret VDI 50 (Duplomatic), 6 tool holders for driven tools, and a 400 series (KH400) chuck. Control system: Heidenhain. The machine is still used for occasional production. Inspection is possible at any time; the machine is connected to power. OTHER MACHINES ARE ALSO AVAILABLE FOR SALE; PLEASE INQUIRE.

Condition: used, Year of construction: 1999, turning length: 1,000 mm, turning diameter: 500 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, capacity: 1000 x 570 mm spindle bore: 80 mm multi-tool turret Ncodpfx Ajy E Hvvsiyou Siemens control steady rest 3-jaw rotary chuck, 315 mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 110532, turning length: 1,980 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, turning diameter over bed slide: 600 mm, controller model: Siemens 840DSL mit ShopTurn, TECHNICAL DETAILS Swing diameter over bed: 600 mm Distance between centers: 2,000 mm Turning length: 1,980 mm Spindle bore: 105 mm Speed: 2,500 rpm Ncodey Ex Hmjpfx Aiyju Power: 18.5 kW MACHINE DETAILS Control: Siemens 840DSL with ShopTurn Number of gear stages: 2

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160 mm Ncodpfx Aisy Ed Ebeyou Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: Nodpfjy Ed Ddjx Aiyscu 2x revolver (12 places) Machine can be inspected under power by appointment.