Licato Verkstadsmaskiner AB

Condition: new, Year of construction: 2026, 0760 mm 450 mm 500 mm Godpfx Asx Urt Sjdmoil 900x450 mm BBT 40 10.000 U/min Motor Capacity 7,5/11 kW max. table load 850 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm,

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 800/530/510 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 1125/600 [mm] - Maximum weight upon table : 800 [kg] - Distance table / spindle nose (min./max.) : 150/660 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 27 [kW] WEIGHT & DIMENSIONS - Machine floor space : 243/2160 [mm] - Machine height : 2670 [mm] - Machine weight : 6415 [kg] MACHINE HOURS - Number of hours under power : 17322 [h] EQUIPMENT - CNC : Mori MSC-504 - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : GAUCHE - Tool probe - Workpiece probe Gsdpfjx Tvi Iox Admeil

Condition: good (used), Year of construction: 1996, Control: OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Gjdsx Tvgaepfx Admeil Chip conveyor Approx. 40 toolholders BT 50

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, -CNC control Heidenhain TNC620 -60+1-fold automatic tool changer -chip conveyor -coolant through spindle device (22bar) -direct position measuring system in xyz -measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1150 mm Verfahrweg Y / Y-Travel 620 mm Verfahrweg Z / Z-Travel 600 mm Tischgröße / table size 1400x620 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 60+1 fach / fold Gijdpfx Adox Tn A Hsmol Eilgang / rapid feed 48 m/min Antriebsleistung Spindel / drive capacity spindle 19 kW Gewicht der Maschine ca. / weight 8300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Software & Control: Giodpfxex Tdkte Admel - High-Speed Machining (HSM) - Ethernet interface - Macros - Coordinate rotation and scaling

Condition: good (used), Year of construction: 2016, Ref. -No.: 10411 Manufacturer: BROTHER Type: Speedio S700X1 Year of construction: 2016 Type of control: CNC Control: BROTHER CNC Storage location: Halberstadt Country of origin: Germany X-Travel: 700 mm Y-Travel: 400 mm Z-Travel: 300 mm Main spindle drive power: 15,4 kW Main spindle speed range: 16 - 16.000 RPM Table surface: 800 x 400 mm Distance Spindle /Table: 180 - 480 mm Table Load: 300 kg Max. Tool Weight: 25 kg Max. Tool Length: 250 mm Max. Tool Diameter: 110 mm Tool change time: 0,8 s Tool Taper: BT 30 Tool Piece Magazine With: 21 Pcs./pcs. Feed Speeds X/Y/Z Axis: 10.000 - 20.000 mm / min Rapid Traverse X-Axis: 50 m / min Rapid Travel Y-Axis: 50 m / min Rapid Traverse Z-Axis: 56 m / min X - axis acceleration: 2,0 G Y - Axis acceleration: 1,3 G Z - axis acceleration: 2,2 G Acceleration time: 0,30 sec Machine length: 2360 mm Machine width: 2120 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 2,4 t Further information: Godpfxsx Sw Ehs Admoil THREAD Speed: 6,000 rpm Acceleration time: 0.11 s CUTTING CAPACITY Drilling capacity in aluminum: max. 24 mm / F0.2 Drilling capacity in C45 steel: max. 18 mm / F0.1 Tapping capacity in aluminum: max. M22 Tapping capacity in C45 steel: max. M14 Milling capacity in aluminum: max. 660 cm³/min. Face milling cutter: Ø 100 / depth 2.2 mm / F=3000 Milling capacity in steel C45: max. 48 cm³/min. Face milling cutter: Ø 40 / depth 2.5 mm / F=484 HIGH-SPEED TOOL CHANGER Stations with directional logic: 21 Change time T - T: 0.8 seconds Changeover time C - C at n=10,000 rpm and XYZ positioning: 1.4 seconds Positioning accuracy: ± 0.006 mm Repeat accuracy: ± 0.004 mm Accuracy of thread depth: 0.05 mm Air consumption: 45 l/min Air pressure: 0.5-0.6 MPa Air quality: 99% anhydrous Including FANUC robot / automation Machine can be inspected under power.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Table size 914mm x 356mm Maximum table load 1316Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual Feed cutting time 11,436 hours Gisdpfx Ajx Sq Sbsdmjl

Condition: good (used), Year of construction: 2001, functionality: fully functional, controller manufacturer: Hurco, controller model: Ultimax, overall weight: 4,500 kg, operating hours of spindle: 10,500 h, number of slots in tool magazine: 18, We are offering this used Hurco VMX 30 vertical machining center, year of manufacture 2001, in good condition. - HURCO Ultimax control - approx. 10,500 spindle hours - 18-position tool magazine - Travel X/Y/Z: 760 x 510 x 610 mm - Max. spindle speed: 10,000 rpm - Table size: 1,020 x 510 mm - Tool holder: SK40 - Weight: approx. 4,500 kg If you have any questions or require further information, feel free to send us a message or call us. Gsdpjx Sdqkefx Admsil

Condition: excellent (used), Year of construction: 2016, Used 5-axis universal machining center Year of manufacture: 2016 Working area: X travel: 762 mm Y travel: 508 mm Z travel: 508 mm Spindle nose to table (max): 610 mm Spindle nose to table (min): 102 mm Table / Load capacity: Platter diameter: 500 mm Max. table load: 300 kg 7 T-slots, 63 mm spacing Spindle: Taper: CT40 Max. speed: 12,000 rpm Max. rated power: 22.4 kW (30 hp) Giodpfx Adjx Rpbxemsl Inline direct-drive, liquid cooled 5-axis function: B-axis (tilt): +120° to -35° C-axis (rotation): 360° Tool changer: SMTC, 40+1 positions Tool change time: approx. 1.8 s (tool-to-tool) Through-spindle coolant 21 bar Chip conveyor Renishaw measuring system Feeds: Rapid traverse: up to 30.5 m/min on all axes Max. cutting feed rate: approx. 21.2 m/min General: Coolant tank: 208 l Air requirement: approx. 113 l/min at 6.9 bar Weight approx. 6,460 kg Machine can be inspected near Heilbronn by appointment. Loading available. Buyer is responsible for transport. Technical data, accessories, and machine description are non-binding.

Condition: good (used), Year of construction: 2015, Model Year: 2015 Width: 560 Length: 430 Gsdpfx Aex N Txfsdmsil Height: 570 Number of Axes: 3 Holder: BT40 Spindle Speed (RPM): 10,000 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Internal coolant 20 bar 40 Tool changer 18k RPM Spindle hSK-A63 Gedpfx Adox N E H Uemoil Linear Scales Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Ultimotion software Tool change optimization software Please not vices are not with sale of machine

Condition: good (used), Year of construction: 2012, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, Used 3-axis machining centre DMG MORI Milltap 700 Year of manufacture: 2012 Control: Siemens Travel paths: X 700 mm, Y 420 mm, Z 380 mm Godpfx Aex N Dcujdmsil Spindle speed: 10,000 rpm Tool holder: DIN30 Renishaw 15-position tool changer Dimensions and Weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg The machine can be inspected by appointment in Burbach. Loading can be arranged. Technical data, accessories, and machine description are non-binding.

Condition: good (used), Year of construction: 1999, operating hours: 12,506 h, functionality: fully functional, X Y Z 710 500 500 Heidenhain 426-430 IKZ Gijdpfx Adjx Nur Hsmol

Condition: used, Year of construction: 2012, functionality: fully functional, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 16 kVA, torque: 95 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,100 kg, table width: 500 mm, table length: 800 mm, rotational speed (max.): 16,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 18 W, tool length: 305 mm, tool diameter: 77 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used AGIE CHARMILLES MIKRON VCE 800X PRO vertical machining center, year of manufacture 2012. Year of manufacture: 2012 Control: iTNC530 Supply voltage: 3x400 VAC + PE Frequency: 50/60 Hz Protection current: 32 A Control voltage: 24 V DC Connected load: 16 kW Noise level: 76 dB(A) Weight: 5000 kg Power factor cos φ: 0.9 Serial number: 1033618 Revision: V6.2 Documentation valid as of: 17.03.2010 Prepared for 4th-axis as well as additional Lehmann 4th axis Complete, fully enclosed machine cabin • Two side windows, large front doors • Efficient work area lighting • Telescopic covers for X, Y, and Z axes • Spiral chip conveyor with mechanical double filter • Automatic central lubrication • Side-mounted tool changer • Manual washdown gun • Manual compressed air gun • Machine status signal lamp • 10,000 rpm spindle (Pro-X 16,000 rpm) • Water-cooled spindle head • Active spindle chiller (14,000 / 16,000 rpm) • Side chip flushing system (Mikron VCE 600Pro – MIKRON VCE 1400Pro) • Coolant and air nozzles on the spindle head • Extendable coolant tank • Threading without compensating holders • Heidenhain iTNC530 control • Portable electronic handwheel • Heidenhain smart.NC • Tool management for up to 30,000 tools • Ethernet network connection and RS-232 interface • Prepared for additional options Gisdpfx Adsx Nikwsmel If you have any questions or need further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Godpfsx Nf Tbjx Admsil Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; Giodpfxjx Ncpgs Admol spindle chiller; rigid tapping; rapid traverse 36,000 mm/min; manual pulse generator; air blast; coolant tank & pump; chip tray;

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC i Series, table width: 430 mm, table length: 920 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine Gedpox Nbtdjfx Admoil

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, table load: 300 kg, rotary table diameter: 500 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 12,118 h, spindle motor power: 22 W, spindle nose: BT40, number of slots in tool magazine: 40, Through-spindle coolant 20 bar Filtration Belt chip conveyor Gisdpjx I Nutjfx Admol Workpiece probe Tool probe Robot interface preparation Automatic (side) door Portable handwheel Washing gun High-speed machining

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller model: OSP-P200M, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Gedpjx I Ecyefx Admeil Travel X-axis: 762 mm Travel Y-axis: 460 mm Travel Z-axis: 460 mm Spindle speed range: 50 - 15,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Tool magazine: 32 positions MACHINE DETAILS Control: OSP-P200M Main drive motor: 22 kW Dimensions & Weight Required space (L x W x H): 2,850 x 2,810 x 2,750 mm Machine weight: 7,200 kg EQUIPMENT Chip conveyor Internal coolant supply Standard filtration unit

Condition: excellent (used), Year of construction: 2015, operating hours: 7,110 h, functionality: fully functional, DMG DMU 65 Monoblock 5-Axis Machining Centre (2015) Manufacturer: DMG Model: DMU 65 Monoblock Gjdex Iwb Ijpfx Admeil Year of manufacture: 2015 Condition: Used, very good, still in production. Power-on hours: 21,336 h Spindle hours: 7,112 h Control: Heidenhain iTNC 530 X-axis: 735 mm Y-axis: 650 mm Z-axis: 560 mm Tool holder: SK40 Spindle speed: 10,000 rpm Chip conveyor Internal coolant supply (IKZ) 40 bar Band filter system 3D probe Documentation Additional accessories optional.

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm Giodsx Iikbopfx Admol - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 4350 kg Measurements height 2310 mm Measurements depth 1950 mm Dimensions Machine Length 3000 mm Main Drive Number of axis 3 Spindle Speed 10000 RPM Spindle motor power 9 kW Movement X-Axis Movement 760 mm Z-Axis Movement 460 mm Y-Axis Movement 440 mm Tools Max weight 8 kg Godpfx Adex H U Euemsil This 3-axis Optimum Optimill F150 was manufactured in 2017 and features a Siemens Sinumerik 828D control system, a vertical spindle type SK40 with a speed range of 10-10,000 rpm, and a carousel tool changer with a 16-tool capacity. It supports a maximum table load of 350 kg and includes a screw-type chip conveyor. If you are looking to get high-quality milling capabilities, consider the Optimum Optimill F150 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2011, Hurco VMX60SR 5 Axis CNC Vertical Machining Centre With Hurco Winmax Dual Screen Control Giedpfsx H Tbbsx Admel Table Dimension 1,670 x 660mm (5 'T' Slots). Rotary Table Dimension Ø610mm (5 'T' Slots). Axis Travel 'X'=1,525mm, 'Y'=660mm, 'Z'=610mm, 'B'=0-92°, 'C'=360°. Maximum Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. S/No: S374F2210122DFDCH (2011). With Spindle Inspection Probe, Renishaw Toolsetter, Coolant System, Chip Conveyor, Filtermist FX7002 Mist Extraction Unit, Wash Gun, Handwheel, Signal Tower. Please View Last Service Report 27/05/2025 (Attached). Note: Spindle Tooling & Vices Not Included.

Condition: used, Year of construction: 2010, X axis: 700mm Y axis: 560mm Z axis: 560mm Table Load: 500kg Magazine positions: 30 / BT40 Max. spindle speed: 12000RPM Gisdpex Hypxjfx Admsl Spindle oil chiller Through spindle coolant Floor space W x D (mm) 2,235 x 2,420