Simba Group sp. z o.o.

Condition: used, Year of construction: 2008, machine/vehicle number: 0-250-19-0287, functionality: fully functional, input voltage: 415 V, input current: 125 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 1,500 mm, workpiece width (max.): 3,000 mm, workpiece height (max.): 60 mm, actuation type: electric, total height: 2,760 mm, total length: 5,280 mm, total width: 7,150 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, The PROFI BHT 500 drilling center is equipped with 2 upper tool heads. Each head includes: a) two sets of vertical drills with a 32mm spacing: 17 spindles in the Y-axis, 15 spindles in the X-axis, and an additional 4 horizontal spindles in the Y-axis. b) an electric spindle unit with a power of 5kW and an ISO30 chuck. Bedpfx Acozyp Tko Towt The machine also features two horizontal drilling units, each consisting of: two units equipped with 9 spindles with a 32mm spacing, and 2 glue guns for applying adhesive and furniture dowels. Belt conveyors at the infeed and outfeed points allow for manual loading of parts, and the machine can also be operated in a production line.

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Bjdpfx Acszyalke Tjwt Two panels that can be processed simultaneously (on the Z-axis) Automatic panel dimension detection system (on the X and Y axes) BOTTOM WORKING UNITS (BH41): No. 31 Independent vertical boring spindles (No.) 31 No. 10 (8 X + 2 Y) Independent horizontal boring spindles No. 1 Circular Grooving Saw (on X axis) dia. (mm) 160 (N° 1 x kw 5) No. 1 Vertical electro-spindle ISO 30 (N° 1 x kw 6,5) No. 1 Horizontal electro-spindle (N° 1) on the Y axis TOP WORKING UNITS (BH41): No. 31 Independent vertical boring spindles (No.) 31 No. 10 (8 X + 2 Y) Independent horizontal boring spindles No. 1 Circular Grooving Saw (on X axis) dia. (mm) 160 (N° 1 x kw 5) No. 1 Vertical electro-spindle ISO 30 (N° 1 x kw 6,5) No. 1 Horizontal electro-spindle (N° 1) on the Y axis

Condition: excellent (used), CNC CELL with AUTOMATIC panels handling for routering, boring, cutting and edge banding BIESSE Machine with a movable gantry (on the X-axis)–CNC with “bTouch” screen and “bPad” wireless console Software bSolid+bEdge, connection to SOPHIA, IoT (Industrial Internet of Things) platform N. 10 supports ATS (L = mm 1800), with automatic EPS (Electronic Positioning System) Automatic tool change system (Tools storage plate in X-axis / 16 positions) Useful working area (X - Y - Z) mm 6735 x 1650 x 245 (290) Useful working area (X - Y - Z) in edge banding mm 5780 x 1930 x 60 N. 2 Working areas - Vacuum pump (capacity m3/h 250) - Motorized carpet to evacuate wastes/chips 1st Y-axis)- 2 machining heads (upper) in 4 slots Slot 1 + Slot 2: N° 1 vertical HSK F63 electrospindle (13.2 kW) with C-axis (360°) and air blowers Automatic tool change system (Tools storage plate in Y-axis / 6 positions) N° 16 (or 20) independent vertical drilling spindles + N° 6 (or 8) independent horizontal drilling spindles N° 1 Circular Saw (grooving) 120mm diameter (on the X-axis) Slot 11 + Slot 12: N° 1 vertical spindle HSK F63 (13.2 kW) with C-axis (360°) and air blowers Automatic tool change system (Tools storage plate in Y-axis / 6 positions) Bodpfozxnphex Ac Towt N° 16 (or 20) independent vertical drilling spindles + N° 6 (or 8) independent horizontal drilling spindles N° 1 Circular Saw (grooving) 120mm diameter (on the X-axis) 2nd Y-axis - Edge Banding Unit - GU60C Glueing Unit (Hot Melt EVA glue) / Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (for 2+2 = 4 reels) 200312) automated panels loading +unloading, using a KUKA robot (moving along the X-axis)

Condition: used, Year of construction: 2018, working length X 2.500 mm Bodezwxy Uopfx Ac Tewt working length Y 1.300 mm working depth Z 190 mm Motor output 2,2 kW Number of milling agregates 1 St. Weight 1.800 kg Year 2018

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Bwodpfjzwg H Aex Ac Tet Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 320539B, functionality: fully functional, power: 1.7 kW (2.31 HP), type of input current: three-phase, workpiece width (max.): 1,250 mm, workpiece height (max.): 50 mm, number of axes: 3, number of slots in tool magazine: 4, actuation type: electric, total height: 1,890 mm, total length: 2,900 mm, total width: 1,650 mm, overall weight: 1,400 kg, table length: 99,999 mm, table width: 1,300 mm, Equipment: CE marking, We are offering this virtually new Vitap K3 throughfeed machining center, manufactured in 2023. Additional equipment: 20" LCD TFT monitor Industrial PC WSC user interface with Lister, parameter tools, and parametric settings Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming DXF file import CE compliant Advantages of the machine: Qualitative machine advantages Technical advantages of the machine: Feed rate: 25 m/min Automatic 4-position tool changer Max. Horizontal tool Ø: 12 mm Max. Vertical tool Ø: 35 mm Motor: 1.7 kW Number of independent vertical axes: 12 // number of independent horizontal axes on the X-axis: (2+2) Max. Horizontal drilling depth on X and Y axes: 35 mm // max. Vertical drilling depth: 43 mm // number of horizontal drilling spindles on the Y-axis: (2+2) Electrospindle: 5 kW with ISO30 taper (rpm 12000-24000) Max. Workpiece dimensions: Y 1250 mm, Z 50 mm Min. Workpiece dimensions: X 270 mm, Y 150 mm, Z 3 mm Additional information: Bwjdpfx Acozv U Nce Tjt Axes: 3 controlled axes (X, Y, Z) X-axis: DDT feeding system Y-axis: drilling head movement Z-axis: drilling operations Optional upgrades (at an extra cost): Tool set for production start Tool holder ISO 30 / ER 32 Lubricant cartridges PC with more powerful processor Extra pneumatic top pressure Nesting system Barcode scanner Post-processor for MPR files License for TPA office software Front and rear roller support Narrow part guides Optional clamping opening for 60 mm thickness Options for angular transmission CAD design software for furniture construction *There may be differences between the displayed data and the actual values. *There is no warranty on this machine; the price is an "as is" price. If you have any questions or would like more information, please feel free to send us a message or call us. Available for pickup in Enkhuizen around the beginning of October 2026.

Condition: ready for operation (used), Year of construction: 2006, input voltage: 400 V, number of axes: 4, controller manufacturer: Masterwood, overall weight: 3,800 kg, Masterwood Projekt 415 4 axis CNC machine Working area 3200 x 1335 4 working fields ISO30 10.5 HP spindle C-axis Toolchanger 12 positions 6 supports Schmalz double channel Vacuumcups 17" screen Drillinghead 16 spindels (horizontal and vertical) Machine in working condition Pneumatic lifters Bwodszv S Suopfx Ac Tot Vacuümpump Becker Fence left, right and back Safety mats in the front (not checked) WIndows control Masterwork CAD-CAM system Available from 31 of August 2026 Price on request

Condition: used, Year of construction: 2023, machine/vehicle number: 1000048862, functionality: fully functional, operating hours: 1,315 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,660 mm, travel distance Y-axis: 260 mm, workpiece length (max.): 4,500 mm, workpiece width (max.): 260 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 22, controller manufacturer: biesse, actuation type: electric, Equipment: CE marking, documentation/manual, Biesse Winline 1650 – Pod & Rail CNC machining center, 2023, only 1315 operating hours. Pod & rail type CNC machining center with an integrated loading/unloading manipulator. Manufactured in 2023, with only 1315 hours of operation – practically a new machine, ready for production immediately after installation. CONDITION The machine is fully functional and in excellent technical condition. Regularly serviced by the official service provider. Last service: [date]. Reason for sale: [reason]. INSPECTION AND DELIVERY We provide dismantling and loading for export, and assist with transportation arrangements. Bwjdpfxjzvvmpo Ac Tst

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. Bwedpfx Acozvhlke Tst MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Bwodpfszvhkyox Ac Tst

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale: Weeke Optimat BHX 500 vertical CNC machining center, manufactured in 2011, designed for drilling, milling, and grooving sheet materials in the furniture industry. The machine enables fast and precise machining of parts and is suitable for both serial and custom furniture production. Technical specifications: Model: Weeke Optimat BHX 500 Year of manufacture: 2011 Machine type: 3-axis continuous CNC machining center CNC control system: WoodWOP (Homag / Weeke) Maximum workpiece length: approx. 3050 mm Maximum workpiece width: approx. 1200 mm Maximum workpiece thickness: 80 mm Minimum workpiece length: approx. 200 mm Minimum workpiece width: approx. 70 mm Equipment: Drilling head with multiple vertical and horizontal spindles 96 drilling spindles (48 from above, 48 from below) 36 vertical spindles 12 horizontal spindles Grooving saw Bodpfx Acozvftls Tewt Milling cutter (from above and below) 125 mm saw, rotatable by 90° Automatic clamping and workpiece transport system Possible applications: Drilling for dowels and fittings Milling and grooving Machining of chipboard, MDF, HDF, plywood, and solid wood Advantages: The ability to machine two pieces simultaneously significantly increases productivity Fast retooling and workpiece changes High precision in drilling and milling Ideal for the production of cabinet furniture, kitchens, wardrobes, and interior elements Condition: The machine is regularly serviced and fully functional. Test run possible during inspection. Availability: end of October

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: Bwsdpfx Aozvduujc Tot - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: Bwodpfezu A D Ejx Ac Tjt - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2020, functionality: fully functional, - Milling spindle 2 x 3.5 kW - Upper and lower drilling heads - Dado saw - Barcode reader Used machining center Manufacturer: Masterwood Type: MasterDrill TF 600 SA Year of manufacture: 2020 With the TF 600 SA machining center, panels can be processed one after the other in various sizes without interruption from all 6 sides. The workpieces are transported along the X-axis by means of two independent grippers. The grippers are NC-controlled and also serve as a reference stop for aligning the workpieces. They are also equipped with a device for automatic measurement of the workpiece thickness. Max. feed rate of the grippers: 130 m/min. Minimum and maximum workpiece dimensions: - Workpiece thickness: 8 ~ 60 mm - Workpiece length: 400 ~ 2500 mm - Workpiece width: 400 ~ 950 mm Drilling heads: - The drilling heads are manufactured in one piece from an aluminum alloy. Two drilling heads process the workpiece from above, one from below. This drilling head arrangement makes the TF 600 SA a versatile machine with high drilling performance. Upper drilling heads: Bodszux T Nspfx Ac Towt - Vertical drills in X direction: 7+7 - Vertical drills in Y direction: 5+5 - Horizontal drills in X direction: 2x2 + 2+2 - Horizontal drills in Y direction: 2+2 Lower drilling head: - Vertical drills: 3x3 Dado saw: - A dado saw mounted on the upper drilling head near the stop allows grooves to be cut in the X direction (maximum diameter of the saw blade = 125 mm). Grooves can be cut from a minimum of 55 mm and a maximum of 850 mm. Milling spindle 2 x 3.5 kW: Technical data: - Maximum power: 3.5 kW - Maximum speed: 18,000 rpm - Clockwise/counterclockwise rotation - Operation via inverter - Tool holder ER 25 - Air cooling The positioning accuracy of the units is +/- 1/10 mm Automatic workpiece discharge: Motorized conveyor belt with sensor control. CNC and software: - The machine table is fully controlled by NC and guarantees continuous fixing of the panels in all working positions. All movements are designed to enable the widest possible support surface on the workpiece. Clamping devices are activated depending on the work unit. The table is equipped with an NC-controlled side alignment device, which ensures perfect alignment of the workpiece panel. Masterwork: - Masterwork enables the machine operator to quickly and easily program. The software can import the most important data formats such as DCF and XML. Master Drill: Human-machine interface for managing operational activities (maintenance/setup). Trepan: An interface that the operator uses for manual and setup operations. Barcode reader: - Motorized roller conveyor for feeding workpieces into the infeed. - CAM start software package for Masterwood TF 600 SA - Automatic barcode scanner at the infeed Note: The technical data and descriptions are transcripts from the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, operating hours: 500 h, Throughfeed machining, workpiece machining from below, and automatic workpiece return to the operator. 3 controlled axes: X axis - uninterrupted workpiece transport via DDT (double dynamic transport system) with a brushless motor Y axis - drilling head travel Z axis - drilling - Double "0" reference: new laser generation for detecting the start and end of the workpiece. The program can adjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge materials. - Side stops with rollers consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning on the 0 line. - Rear workpiece outlet - Automatic 4-position tool changer - No workpiece length limitation - Monitor LCD TFT 19" 5/4 - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Bwedpfxszuxdbo Ac Tot Technical data Number of independent, vertical spindles: 12 Number of independent, horizontal spindles on the X axis: (2+2) Number of horizontal drilling spindles on the Y axis: (2+2) 1 saw (Ø 100mm) Electric spindle 5 kW with ISO30 taper (RPM 12000-24000) Max. workpiece weight: 80 kg Max. workpiece dimensions: X unlimited, Y 1200 mm, Z 50 mm Min. workpiece dimensions: X 270, Y 185 (70op), Z 4 mm Feed rate: 25m/min Spindle speed: 3500 RPM Max. horizontal tool Ø 12mm Max. drilling depth horizontal on the X and Y axis 30mm Max. drilling depth vertical: 45 mm Max. vertical tool Ø 35mm Air consumption 2000 m3/h Extraction speed 30 m/s Extraction nozzle 2xØ. 100mm + 1xØ.50 mm Motor: 1.7 kw Compressed air: 7 bar Max. air consumption: 60 nlt/min CE STANDARDS - Office software - license - Adjustable zero point for 4-sided formatting - CE compliant - Status: 05/28/2026: approx. 500 operating hours and a new PC has been installed.

Condition: used, Technical Data Workpiece Dimensions - Length: 90 - 3,000 mm - Width: 70 - 1,000 mm - Thickness: 8 - 60 mm Working Ranges X-Axis - Vertical Drilling: 0 - 3,000 mm Bjdpfx Ajzutrtsc Tswt - Horizontal Drilling (X and Y): 0 - 3,000 mm - Through Milling: 0 - 2,500 mm - Partial Milling: 0 - 3,000 mm - Through Grooving with Saw (X-direction): 0 - 2,500 mm - Partial Grooving with Saw (X-direction): 0 - 3,000 mm Y-Axis - Vertical Drilling: 0 - 1,000 mm - Vertical Drilling with 32-mm System: 32 - 1,000 mm - Horizontal Drilling in X: 0 - 1,000 mm - Horizontal Drilling in Y-direction: 90 - 1,000 mm - Milling: 0 - 950 mm - Grooving with Saw (X-direction): 112 - 1,000 mm Z-Axis - Material Thickness: 0 - 60 mm Equipment The machine is equipped with 78 independent drilling spindles, distributed across two mirror-image processing units: - 39 spindles in the upper unit - 39 spindles in the lower unit Each processing unit includes: - 29 vertical drilling spindles (19 along the X-axis and 10 along the Y-axis, 32 mm spacing) - 8 horizontal drilling spindles along the X-axis (4 with dual outlets) - 2 independent horizontal drilling spindles in the X-direction - 2 independent horizontal drilling spindles in the Y-direction - 3.5 kW HSK electro-spindle - Spindle speed: 6,000 - 18,000 rpm Optional Equipment - Roller loading table - Upper and lower work tables (pressure tables) - Upper and lower processing units - Right-hand side strip unloading conveyor - Electronic thickness control - Central automatic lubrication - PC-based CNC control (Windows XP 600 with Soft CN) - Safety system

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 72122, functionality: fully functional, working width: 900 mm, number of spindles: 17, spindle speed (max.): 24,000 rpm, working height: 70 mm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 900 mm Working area, Z-axis: 70 mm Bjdpfozulv Dox Ac Tewt Milling unit Number of milling spindles: 1 Tool holder interface: ISO 30 Spindle speed range: 12,000 – 24,000 rpm Spindle speed control: stepless Drilling unit Number of horizontal drilling spindles: 6 Number of vertical drilling spindles: 10 Sawing unit Manual operation MACHINE DETAILS Power of main motor: 4 kW Connected power: 12 kW Voltage: 400 V Current consumption: 22 A Fuse rating: 32 A Dimensions & Weight Transport dimensions (L × W × H): 2,000 × 2,600 × 2,700 mm Transport weight: 1,500 kg Number of transport packages: 1 EQUIPMENT CE marking

Condition: used, Year of construction: 2007, Work table dimensions: 3050 x 1240 mm Passage opening: 170 mm Travel range X-Y-Z: 3500 x 1790 x 340 mm Main milling head: Electric spindle with HSK 63 F tool holder Speed range of 600 - 24000 rpm, continuously adjustable via inverter Motor power 8.5 kW from 12,000 rpm (S1) Clockwise/counterclockwise rotation Rotary axis Vector (C-axis): For use with angular gearheads. Bwedszr H Ivopfx Ac Tot Angular gearhead Mimatik HSK 63 F Tool changer RAPID 12 (travelling type) Drilling head F11 with grooving unit - 7 independent vertical spindles (4 right and 3 left) - 4 horizontal spindles (1+1 spindles in the X-axis / 1+1 in the Y-axis) Integrated, independent grooving saw unit with saw blade DM 120 mm Work table ALU Vacuum pump 250 cbm/h Power 5.5 kW Max. vacuum (connection) 0.9 bar Control: ESA-GV KVARA 6 with Office PC User interface: Xilog Plus Operating system: Windows XP Cable remote control Central extraction port: 200 mm Weight: approx. 2700 kg Space requirement: approx. 5700 x 4100 x 2600 mm without control cabinet Control cabinet 600 x 800 x 1900 mm Storage location: Supplier

Condition: used, Year of construction: 2012, GENERAL FEATURES: CNC machining center with a fixed machine table and a moving tool carrier in a portal design for drilling and milling operations on panels made of various materials (chipboard, MDF, solid wood, plastic, etc.). MACHINE STRUCTURE: The base structure is a monolithic design made of thick-walled material, reinforced by welded-in parts across the entire machine bed, making it extremely stable. The table design, with a large base, ensures long-lasting precision and stability. The machine layout allows the user an optimal workflow despite a minimum of space. The mobile portal carrier is made from a solid monoblock. It is positioned in the X-direction on prismatic, ground guides using ball screw slides. On this mobile tool carrier, the working unit is in turn attached to prismatic, ground guides and the ball screw slide. Axis movement is achieved using "brushless" motors in the X/Y/Z axes. The drive system operates in the X-axis via a pre-tensioned precision rack and pinion drive, and in the Y/Z axes via ground ball screws of the highest precision class. AXIS MOVEMENT: The movement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the working unit along the moving portal (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. STANDARD MACHINE DESIGN: Milling spindle with 5-axis positioning, 11kW (15HP), HSK63, 1200-20000 RPM. The machining unit consists of a powerful 11 kW (15 HP) motor, which is liquid-cooled and capable of 5-axis positioning. This feature enables machining operations to be performed with a tool that can be oriented in any direction; therefore, fewer angular movements are required. The base structure of the milling unit is based on a design with two non-orthogonal axes that intersect next to the tool. This feature guarantees a robust carrier for heavy-duty milling applications. Thanks to the non-orthogonal axes, it is possible to perform numerous repositionings without using too much space. This allows the machining of complex geometries without the risk of collision with the workpiece and achieves an angle of -10° in relation to the machine table. All machining operations are facilitated by the small dimensions of the group in relation to the rotation axis of the spindle: when the group is in a horizontal position, the dimension is only 35mm. WORK TABLE TV: The work table is designed to guarantee the operator maximum "freedom of movement." The vacuum quick-change clamping system provides maximum flexibility with precise positioning and optimal work piece holding. The table consists of moving consoles that are adjusted in the X-axis on ground guides with ball screw shoes and a special profile to ensure Bwodpfx Acozrvvve Tet

Condition: repair required (used), Year of construction: 2010, functionality: limited functionality, BIESSE Skipper 130 - Year of manufacture: 2010 - Available from September 2026 - The lower drilling unit has a problem and needs to be repaired. - The machine is still in operation and can be inspected. - Please feel free to contact us if you have any questions. Bjdpfx Ajzp Simec Towt

Condition: used, Year of construction: 2020, includes accessories Working width 950 mm Bwodpfjzn N Iqex Ac Tot 4-position tool changer, side-mounted Location: Nattheim

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Y axis working area: 1650 mm Working Table: Pod and Rail Bedpfx Aoznuxbjc Tswt Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 65 mm Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: used, Year of construction: 2014, Machine design: Continuous/Reciprocating Working area in X-direction: 1000 mm Working area in Y-direction: unlimited Bwodpfx Ajzndmhoc Tot Working thickness (Z-dimension): 60 mm Number of main spindles: 1 Main spindle power: 3.3 kW Clamping system: HSK-63 F Tool changer: Pick-up tool changer Number of tool change stations: 3 Back wall grooving units: fixed in the Y-direction Vertical drilling spindles - in the X-direction: 5 Vertical drilling spindles - in the Y-direction: 5 Spindle speed, vertical drilling spindle: 4000 rpm Horizontal double drilling spindle in the X-direction: 2 Horizontal double drilling spindle in the Y-direction: 1 Spindle speed, horizontal drilling spindle: 4000 rpm Monitor size: 17" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: Masterwork DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table design: Fixed table with rollers Weight approx.: 1300 kg Dimensions: 2200x2470x1590 mm Location: Customer

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Bjdpfjzl Ap Nex Ac Tjwt

Condition: excellent (used), Year of construction: 2014, • Working area: 3,000 x 1,300 x 80 mm • 2 independent CNC drilling heads • Main drilling head: 15 vertical spindles X / 19 vertical spindles Y / 4 horizontal spindles X • Additional drilling head: 11 vertical spindles X / 3 vertical spindles Y / 4 horizontal spindles X • Upper milling unit 6.6 kW, HSK 63F, 24,000 rpm • Lower milling unit 6.6 kW, HSK 63F, 24,000 rpm • Additional horizontal spindles Bwsdpfszltrbox Ac Tot • Integrated drilling heads for concealed hinge applications • CNC control Xilog Plus • DXF import • Parametric programming • Tool management • Automatic workpiece thickness measurement • Patented CNC workpiece clamping system • Automatic workpiece repositioning • Automatic central lubrication • Loading and unloading table