Kewell Converters Ltd.

Condition: good (used), Year of construction: 2004, operating hours: 18,000 h, EPS block molding machine: Erlenbach Y2004 EBV 3080x1040x1040, price €77,000. Automatic operation, automatic weighing, with mixing of fresh and recycled material. Reliable, in daily use with 18,000 operating hours. Lrodpfxjyuuvne Agwoi

Condition: good (used), Year of construction: 2008, operating hours: 18,000 h, functionality: fully functional, EPS Erlenbach Pre-expander EVD 1000 Ljdpfsyuudfsx Agwori Batch EPS foam pre-expander unit with automatic weighing system and fluidized bed. Regularly maintained, currently operational, and in daily use. Year of manufacture: 2008

Condition: like new (used), Year of construction: 2021, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: VIRO HV Q-4, inner dimension height: 1,300 mm, inner dimension width: 1,100 mm, pipe length (max.): 4,010 mm, Complete EPS Production Line for block cutting and packaging, Model: VIRO HV Q-4, Year: 2021, Price: €459,000 Ledpfsyucyusx Agwsri Includes extractor, side scrap handling unit, packaging system, bale-marking unit, stacking, and a separate dust compactor. Equipped with weight measuring unit, automatic block tipper, automatic cutting wire adjustment, and manual unloading. Designed for producing bales with a sheet size of 50x100 cm, with color marking of bales, as well as for forming stacks—semi-automatic equipment group. Suitable for handling blocks 3-4 meters in length. In daily use, 5,000 operating hours. Like new condition. EPS Block Moulding Machine: Erlenbach Y2004 EBV 3080x1040x1040, Price: €77,000 EPS block production unit, fully automatic operation, can mix virgin and recycled material. Reliable, in daily use, 18,000 operating hours. EPS Pre-Expander: Year 2008, Erlenbach Pre-expander EVD 1000, Price: €42,500 Batch pre-expander with automatic weighing system and fluid bed. Reliable, in daily use, 18,000 operating hours. Steam Boiler: Year 2008, Manufacturer VASFA Kft Szolnok, Type AKH 1/12 EU, Price: €51,000 1 t/h, 660 kW Operating pressure: 12 bar Tested pressure: 19.4 bar Reliable, in daily use, 18,000 operating hours.

Condition: used, Year of construction: 2011, We are offering this very rarely used oil tempering unit. It was utilized for research purposes. The unit still contains the thermal oil. The two connection hoses (no guarantee) are also included. Two units are available; please see the second listing. Both are of equal specification. Please send your price offer—and allow some time for a response, as we handle these matters alongside our main activities. The unit must, if not already done, be dismantled and disconnected by your own qualified personnel. All transport-related procedures and requirements are to be carried out at your own expense and risk. Lrsdpeyk Dr Defx Agwsi The buyer is liable for any (consequential) damages occurring on the premises. Pickup must be completed within 14 days of sale.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02 2406, GEISS DU 2400 X 2400 T8 Lrsdpfsyin Ugsx Agwoi YEAR OF MANUFACTURE: 2002 SERIAL NUMBER: 02 2406 TOTAL POWER CONSUMPTION: 517.9 kW RATED CURRENT: 750 A HEATING POWER INPUT (upper - lower): 462.9 kW RATED VOLTAGE: 230/240 V FREQUENCY: 50 Hz TOTAL WEIGHT: 141.1 kN AIR CONSUMPTION: 3315 liters/cycle AIR CONNECTION: 6 x 10/5 to 8 x 10/5 Pa WATER CONNECTION: min. 1.5 x 10/5 to max. 2.5 x 10/5 Pa A Geiss large-format vacuum thermoforming machine is available. Minimum panel cutting: 1100 mm / 1300 mm, maximum panel cutting: 2100 mm / 1800 mm, maximum forming depth: 620 mm. Additional sheet format 1: min. 850 mm / 750 mm, max. 1850 mm / 1250 mm. Additional sheet format 2: min. 1050 mm / 800 mm, max. 2050 mm / 1300 mm. Includes a separate loading unit with pneumatic panel separation equipment, automatic aligner for longitudinal and crosswise sheet cutting, pneumatic pusher for removing molded parts from the loading table, fully automatic central lubrication system for the loader, and several interchangeable pallets for window panel sets. Documentation available. On-site inspection possible.

Condition: excellent (used), Year of construction: 2004, (LIDS PRODUCTION) Lrjdpjyh Hhyofx Agwoi Machine consists of: -1x Roll-off block -Thermoformer Gabler Swing -Stacking

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. WM 780E s/n 372 yr. 2008 UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 CUTTING PRESS Ledpfx Agox Uym Hewori Max. cut dimensions (mm) 760 x 550 Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 SCRAP WINDER Max. scrap roll diameter (mm) 600

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Manufacturer Kiefel Lredpfx Agex Ekcaewoi Model KMD 60B Year 2012 Condition Used Stock Number 00034 Approx hours 26000 Delivery date Immediately Stations Three Max tool dimensions TBC Maximum Mould Surface 580 x 440 mm Minimum Mould Surface 260 x 250 mm Depth of draw 120 mm +/- Max film width 630 mm Max dry cycles / min 70 Operating pressure 6 bar Approx Dimensions TBC Approx Weight 10,000 kg Notes All details are subject to change and/or errors.All equipment is subject to availability and/or prior sale.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Profile bending machine model 17-PB-00 by FUX, Austria, in excellent condition. Dry processing (no oil), with hot-air heating, suitable for circular and arched PVC profiles for windows, doors and façade elements. The machine consists of three working stations as shown in the photos, forming a complete line for bending PVC profiles into circular and arched shapes. Application: bending of circular/arched PVC profiles Process: dry processing with hot air (no oil required) Lodpfxsx Dq T He Agweri Three integrated working stations for profile heating, forming and handling In very good working order, ready for use in production Transport / shipping: Transport costs are borne by the buyer. Shipment will be arranged after consultation, in order to agree on the most suitable means of transport and method of dispatch. For further technical details, photographs or to arrange an inspection, please contact us by email.

Condition: excellent (used), Year of construction: 2023, functionality: limited functionality, Manufacturer: Breyer Extrusion Item: Die, 3 layer die 2300mm 3-layer flat sheet die, 2,300 mm width (die opening) Deckling device for one die (max. 500 mm) Feed-block / distribution block Year of manufacture: 2023 Original purchase price at the time: €365,500 Total price at the time: €444,200 Key technical data of the die: - Total throughput: approx. 700 kg/h - Designed for HDPE material Ledpfsx A D Emjx Agwjri - Gross discharge width: 2,300 mm, adjustable via deckling - Lip opening: 16 – max. 26 mm - Heating: Electric via heating cartridges 400V / 50Hz - Die heating capacity: 137 kW - Co-extrusion adapter heating capacity: 7.5 kW Comprising: - Die (main die body) 3 channels - Co-extrusion adapter - Die body - Die lip body - Attachments / screws - Attachments for deckling and co-ex adapter parts - Attachments for adjustment mechanisms (Note: Photos are from 2023) The die now shows signs of use and is stored disassembled. The heating elements are included but not installed. The die is located in 78224 Singen (Hohentwiel) at the manufacturer’s premises. An inspection on site is possible by prior appointment. Further photos available on request. You are welcome to submit a price proposal. Reasonable offers will be considered. Please provide complete contact details with your enquiry! Delivery may be available for a fee. You are also welcome to inspect the item on site. Please call to arrange an appointment. A quick tip: Become a “FOLLOWER” of ours here on Kleinanzeigen to stay up to date with our latest listings and offers. This item comes from insolvency proceedings and thus shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. Sale is without any warranty. Liability, reduction or rescission is expressly excluded. An inspection prior to purchase is recommended, as it is sold as seen. All information is provided without guarantee. Errors and changes excepted. The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of liability for visible and hidden defects, especially technical quality, performance, or usability issues. Due to time constraints, we will only respond to serious enquiries and price offers! This is an advertisement for informational purposes only. Inspection strictly by appointment only! Best regards, Leipziger Sicherstellungs- und Verwertungs GmbH R. Raum, Tel. 0152 31381635

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Make Illig Model RV 74 Year 1999 Hours Approx TBC Delivery Date Immediately Stations Forming, Cutting and Stacking Maximum Forming Area 700 x 500 mm Minimum Forming Area 400 x 250 mm Depth of Draw Above-Below 120 / 40 mm Maximum Material Thickness 2.0 mm Maximum Cycle Rate 20 / min Total Weight 6,600 kg Ledpjxp H Nuefx Agwjri All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Capacity: The machine has a usable length of 2000 mm. Lredpfxsxn T Nrs Agwsi Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: excellent (used), COTEC Ljdjw Tbvrjpfx Agwsri Type: HCS 100 P-UH COTEC HCS 100 P-UH – Hydrophobic Coating System / PVD Unit For sale is a COTEC HCS 100 P-UH, a fully automatic hydrophobic coating system for industrial applications. The unit is ideal for producing high-quality, abrasion-resistant, and transparent hydrophobic and oleophobic coatings on glass, plastic, or metal. Fields of application: • Optics (e.g., eyeglass lenses, precision optics) • Display and electronics industry • Medical technology • Automotive and supplier industry • Consumer goods and decorative surfaces Technical data & features: Model: COTEC HCS 100 P-UH Process duration: approx. 12 minutes per batch Capacity: up to 110 substrates Ø 70 mm (2 racks) Internal chamber: Ø 600 × 540 mm Heatable chamber up to 65 °C Fully automatic process control (PLC) with 19'' operator panel Vacuum system with integrated evaporator for DURALON materials Uniform coating, even on complex 3D geometries No post-treatment required Weight: approx. 300 kg Condition: used Scope of supply: (See image) (Subject to change and error in technical data and information!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2006, Manufacturer Gabler Model M92 L Year 2006 Condition Very Good Stock Number 00006 Max forming area 750 x 436 mm Depth of draw 150 mm Max material width 835 mm Max cycles / min 44 Max mould closing force 350 kN Max top heater output 81.90 kW Ledsw Rpzqopfx Agwori Max bottom heater output 54.60 kW Operating air pressure 8 bar Power Supply 230V 50Hz Total Connected Load 138.66 kW Approx Dimensions 7,925 x 5,320 x 3900mm (LxWxH) Approx Weight 10,400 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: used, We are selling a well-maintained generator from Kiefel. The generator and tubes have few operating hours. The rotary table shown in image 1 is no longer available. Lrjdpfxsw Hdzls Agwji

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 1594, TECHNICAL DETAILS Machine number: 1594 Year of manufacture: 1993 Voltage: 3~220 V, 50 Hz Ledsww Igyopfx Agweri Motor power: 3.52 kW Heating capacity: 216.0 kW Rated operating current: 86.5 A Permissible air pressure: 10 bar

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1531, operating temperature: 650 °C, plate length: 1,000 mm, plate width: 700 mm, TECHNICAL DETAILS Film width: 700 mm Type of input current: AC Input voltage: 400 V Sheet thickness: 10 mm Sheet dimensions: 1,000 x 700 mm Operating temperature: 650°C Pump capacity: 100 l/min Vacuum pump power: 3,000 W Compressed air connection: 6 bar Form height (min.): 300 mm MACHINE DETAILS Overall width: 700 mm Overall length: 3,500 mm Overall height: 3,500 mm Control cabinet width: 1,000 mm EQUIPMENT - Top heating 3 pilot burners, bottom heating 1 pilot burner - Motorized adjustable height of counterform - Quick clamping of upper and lower frame - Quick tool clamping on the lower table - Quick tool clamping on the upper table - Control of underfilm sag - Bubble formation with electric photocell Ledswr Ab Uopfx Agwori - Storable bubble and demolding intensity, pneumatic valves in cascade - BUSCH vacuum pump 100 meters/cubic meter

Condition: ready for operation (used), Year of construction: 1990, operating hours: 45,353 h, functionality: fully functional, machine/vehicle number: 1537, product height (max.): 10 mm, plate length: 1,000 mm, plate width: 700 mm, Hybrid machine for thermoforming films or coils TECHNICAL DETAILS Maximum width: 700 mm Maximum plate: 1,000 x 700 mm Maximum sheet thickness: 10 mm Heating power: 31.1 kW Ledpfx Aswr Abzjgwjri Motor power: 5.59 kW EQUIPMENT - Plate loader type BE without preheating - Coil unwinding device type PR - Upper and lower table - Schleicher PDPF control director - Quick clamping of reduction frames and tools

Condition: refurbished (used), Year of construction: 2017, Was overhauled in 2017, with documentation. Lsdpswqd Adefx Agwjri

Condition: good (used), Year of construction: 1991, functionality: fully functional, Oven for plastic processing The oven can process thermo-plastics. Manufacturer: Reinhardt Lrjdpfewp Em Ujx Agwoi Model : VL Year of manufacture : 1991 No. : 8182 Connected load 50.2 kW Voltage 380 Volt Operating temperature 50 - 200 °C Carriage approx.: 2000 x 1200 mm W x D x 500 mm opening

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 191, type of input current: three-phase, pressure: 10 bar, total width: 3,050 mm, total length: 2,400 mm, total height: 3,480 mm, control cabinet width: 850 mm, control cabinet height: 1,800 mm, control cabinet length: 600 mm, This machine was overhauled in 2020 and installed at a customer and was not or hardly used. Machine is in excellent condition. Has been professionally disconnected and transported. Lredpfewpfrkex Agwoi

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: F.24442.03.03, Unique opportunity for serial manufacturers We are offering you here an immediately available, top thermoforming linear system with automatic tool change, rotary table, powerful lower table with spindle drive, tool change station, maintenance platform, hotmelt extraction, heating enclosure, and many other special functions directly from the manufacturer FRIMO. The system was most recently used for the production of automotive door panels. The film itself was coated with hotmelt. The system can also be used for dispersion adhesives (adhesive on the carrier parts). Very large components are possible, forming area up to 800 x 2,000 mm. The maximum forming part height is 250 mm. Very fast cycle times of under 60 seconds are easily possible. The system was regularly maintained and was in operation up to its dismantling. Currently, the system is properly stored at our facility in Hungary. Lodpfx Aowpd Rrogwsri We have locations worldwide and can assist you directly at your site. We can deliver this system worldwide as needed, install it at your factory, train your personnel, and advise you in all technical matters. Any modifications and modernization are also possible. Just ask us with your individual project request!

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Lrodpfowkkpqox Agwoi Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: reconditioned (used), functionality: fully functional, Technical Specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function - Top heater: ceramic emitters (500 W) with 4-zone control - Individual selection of upper heating elements, including lowering - Bottom heater: ceramic emitters (300 W) with 4-zone control - Individual selection of lower heating elements, including lowering - Program and heating settings storage - Clamping frame with quick-change system - Parallel upper frame, longitudinal runners for use of fixed format frames - Lower clamping frame for frame installation from below, central clamping via E-motor - Pneumatic lower table with rapid/creep speed, adjustable in 15 steps via control panel - Upper punch with rapid/creep speed, adjustable in 7 steps - Vacuum pump with cascade control, adjustable in 15 steps via control panel - Pre-blow automation, percentage adjustable - Pre-vacuum adjustment, percentage adjustable - Automatic demolding, percentage adjustable - Plate sag control via light barrier with support air - 8-fold cooling fan with spray nozzle cooling - Large front opening for tool change Loading - Automatic sheet loading system - Centering table for precise positioning of sheets in the feeder Lrodjwf Eb Rjpfx Agwei - Motorized sheet lifter - Motorized sheet positioning adjustment - Motorized transport lifter - Motorized adjustment of transport width

Condition: reconditioned (used), functionality: fully functional, Plate size: 2000 x 1000 mm Lodpfxjwf Ebws Agwsri Forming area: 1960 x 960 mm Drawing depth: 600 mm If you would like further details or a quote, please contact us.