Rmf Bv

Condition: used, empty load weight: 5,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 02/2027, loading space length: 7,500 mm, loading space width: 2,290 mm, loading space height: 1,500 mm, loading space volume: 24 m³, tire size: 385/65 R22,5, color: red, Equipment: ABS, EBS Disc brake Wheelbase 1,310 mm / 1,330 mm Payload 33,100 kg Air suspension with lift function Floor 5 mm - Side wall 4 mm Dcodpszza Hwsfx Aa Hel Electric sliding tarpaulin cover by Marcolin Tarpaulin color RAL 3002 chimney red SAF axles 1st and 3rd axles can be lifted Aluminum rims Lifting and lowering system Color: Front half of the superstructure in RAL 6016 turquoise green - rear half in RAL 3000 fire red Rear wall with rubber seal Foldable underrun protection Subject to errors and omissions.

Condition: used, cools with ambient temperature all stainless steel adjustable speed total length ± 5.000 mm Dodpfx Aajzza Hqe Hscl nett belt length ± 4.000 mm nett belt width ± 600 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 5.000 x 1.000 x 1.500 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 5,607 h, Mazak Optiplex Nexus 3015 Fiber 3KW laser cutting machine Manufacturer: Mazak Type: Optiplex Nexus 3015 Fiber 3KW Year of manufacture: 2017 Condition: Very good, operational Operating hours: Laser: 11,282 hours Dcjdpfx Aszza Hkoa Hol Beam: 5,607 hours Power: 3KW CNC control: MAZATROL PREVIEW 3 Weight: 15,500 kg Dimensions: 8,490 mm x 3,485 mm x 2,010 mm Axis travel: 3,100 mm x 1,580 mm x 110 mm GENERAL MACHINE OPTIONS - Automatic calibration system - Focus position adjustment - Nozzle cleaning brush - Collection container for material scrap - Transformer for the European market - Protection window for multi-control cutting head - Programming function on the control panel via fixed programs - Cutting table layer detection - 1 set of adjustment tools - Machine feet / leveling shoes - Non-contact height measurement with repeat function - Manual workpiece clamping - Preparation for 3kW resonator - Additional selector switch for cutting gas - NC monitoring for protective gas pressure - Machine status indicator light - Support grid (distance between struts 100mm) will be newly installed - Preparation for dust extraction system - Work area lighting - Machine with CE marking - Automatic shutdown via circuit breaker activation - 2-position pallet changer - NC repeat function - Relocation detector - Mazatrol Preview 3 control - 15" Xga Color TFT monitor - LAN interface - USB interface for PC Special equipment - Automatic nozzle changer magazine with 8 positions - Intelligent monitoring + focus point detection - Extraction system for laser cutting machine Donaldson DFPRO4 Scope of delivery - Set of manuals in electronic form on CD - NOZZLES will all be included / customer cannot use these on the new machine - Lens for multi-control cutting head - Multi-control cutting head - 3rd auxiliary gas line (30 bar)

Condition: used, all stainless steel Dcedpfx Aaezza Hdo Hjl speed up to ± 60 strokes / min. mobile belt width 630 mm power 17 kW weight 1.150 kg

Condition: used, Year of construction: 2017, operating hours: 9,600 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 110 mm, construction height: 3,240 mm, fork length: 1,500 mm, TECHNICAL DETAILS Load capacity: 5,000 kg Dcjdpfxjzza E To Aa Hjl Lifting height: 4,000 mm Free lift: 110 mm Fork length: 1,500 mm MACHINE DETAILS Operating hours: approx. 9,600 h Overall height: 3,240 mm EQUIPMENT Hydraulic fork positioner with side thrust 4-way super elastic tires Full cab with heater Work lights

Condition: used, HSK 80A type tool holders Dcsdpfxezza E Hj Aa Hol together with cabinet 94 pieces, different types as per photos

Condition: used, Technical specifications: For shredding wooden waste Shaft width: 500 mm Shaft diameter: 2x250 mm Screen diameter: 20 Safety switch Dsdpfezza Eysx Aa Hocl Power supply: 400 V Motor power: 2x5.5 kW Overall dimensions: Length: 1500 mm Width: 800 mm Height: 1750 mm

Condition: used, MAN TGS 26.460, Year 2018, Euro 6 emission standard, white color, 399,268 km, short cab, low roof, retarder, steerable third axle, 8-ton front axle, alloy wheels, differential lock, fully equipped. Dcedpfezza Etsx Aa Hol

Condition: used, type pump : Waukesha 320 U2 all stainless steel pump housing 2 gears all stainless steel Dsdozza Emjpfx Aa Hecl dimensions (l x w x h) : ± 1.700 x 600 x 900 mm loading height ± 600 mm discharge height: ± 600 mm inlet and outlet DN 150 3 x 400V 50 Hz 11kW, 1500 / 123 rpm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Djdpfx Aozza Egoa Hocl Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 14,085 h, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DECKEL MAHO DMC 65 V was manufactured in 2003. It features a spindle speed of 18,000 rpm and a tool changer capacity of 30 positions, enhancing its operational efficiency. The machine is equipped with a Heidenhain TNC 426 control system and optional equipment such as tool measurement and an automatic 3D probe. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 65 V vertical machining centre we have for sale. Contact us for further details. Dcodjzza Easpfx Aa Hol - Optional Equipment: Tool measurement, Automatic 3D probe, Chip conveyor, External cooling system- Operating Hours (Power-on / Program Run): 52,067 h / 14,085 h- Electrical Connection: 230V / 1A (Auxiliary)- Known Defects: Sensor for control cabinet ventilation does not always turn on; spindle collet seizes after ~3 weeks of inactivity (loosens after ~200 cycles of clamping/releasing, works flawlessly in continuous operation)

Condition: used, dimensions (l x w x h) : ± 2.750 x 800 x 1.600 mm 3 x 400V 50 Hz 15 kW, 1500 / 128 rpm Dcedjzza D Nepfx Aa Hol Output DN 150 / DN 100 Stator 2N100 SBLBM 167329 L&M, yoc 2022 Nemo / NMME100 / 871955 Hopper / ES4552 NMME100 A869 273

Condition: used, machine/vehicle number: 26510, Year of construction: 1997, operating hours: 5,423 h, load capacity: 3,000 kg, lifting height: 4,300 mm, free lift: 1,230 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, Equipment: cabin, sideshift, .: 26510 Device details: Year of manufacture: 1997 Load capacity: 3000 kg Lifting height: 4300 mm Recorded operating hours: 5423 h Free lift: 1230 mm Mast type: Triplex Mast height: 2050 mm Length/width/height: 2700 / 1260 / 2250 mm Operating weight: 4980 kg ---- Equipment: * Overhead guard * 3rd valve * Full cabin ----- Attachments: * Side shifter ---- Additional device information: Rotating beacon ---- The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Dcedpfjzza Dpox Aa Hjl Of course, also for rent! We would be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English. Subject to prior sale and errors for this offer. In the dealership, the device is sold in its current condition, without refurbishment. All information without guarantee, errors and changes excepted.

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Dcodjzza Diepfx Aa Hol Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: used, Double cutting system 90 kW, 150 A, (60Hz - 104 kW - 151 A) 3 x 400 V dimensions (l x w x h) : ± 1.950 x 1.450 x 1.600 mm 2 knives: 20 teeth-4.8mm, 20 teeth-1.3mm 1 speed (3000 revolutions /min) Connection DN 100 Dcodpfjzza Dcsx Aa Hsl Supply height: ± 950 mm Output height: ± 1,200 mm

Condition: used, Second-hand KUPER RFG roller shutter guide milling machine for milling the roller shutter guide slots into the roller shutter guide strips / roller shutter guides / roller shutter guide rails, fitted with a Scheer HM 16 hand-held router. Dodpfxezza A Ss Aa Hocl Technical data: - Speed: 18,000 rpm - Power: 2,000 W

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,501 h, load capacity: 230 kg, fuel type: electric, battery voltage: 24 V, working height: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 230 kg Working height: 12,000 mm MACHINE DETAILS Fuel type: electric Dsdpfx Aaszza A Es Hocl Battery voltage: 24 V External reference: SL16691SLO

Year of construction: 2023, operating hours: 1,008 h, condition: ready for operation (used), Machine tool manufactured in 2023. This ECOKRAFT LP 22 features a power rating of 22.5 kW and a material bunker capacity of 4 m³. It includes a drum screen with dimensions of Ø 300 mm x Length 1,200 mm and a conveyor belt with a length of 3,600 mm. If you are looking to get high-quality processing capabilities, consider the ECOKRAFT LP 22 machine we have for sale. Contact us for further details. Dsdpfozza Axjx Aa Hecl - Machine Type: Pellet Plant / Pellet Press Line- Power Rating (Cutting Mill): 22.5 kW- Material Bunker Capacity: 4 m³ (with discharge)- Material Container Automatic Operation Capacity: 4 m³ (discharge via conveyor belt)- Operating Hours (from HMI readout):- Power On Time: 3795 h- Total Press Run Time: 1008 h- Current Press Run Time: 1008 h- Removal Conveyor: 1158 h- Screening System: 1158 h- Water Pump: 609 h- Bunker Conveyor: 259 h- Bunker Discharge: 230 h- Bunker Agitator: 201 h- Cross Conveyor: 0 h- Drum Screen Dimensions: Ø 300 mm x Length 1,200 mm- Drum Screen Discharge Height: Max. 1,800 mm (variable height adjustment, side filling right/left)- Conveyor Belt Specifications: Length 3,600 mm, Discharge Height 2,600 mm, Belt Width 150 mm, Number of Cleats: 49, Motor Speed 46 rpm- Big-Bag Frame Vario 1.0: Suitable for size 95x95x100 cm (1.0 m³)- Big-Bag Frame Vario 1.5: Suitable for size 95x95x150 cm (1.5 m³)- Optional Equipment & Features:- Pellet Press LP22- Load-dependent feed control- Rotary valve- Frost-proof control panel with touchscreen interface- Remote maintenance and fault analysis module- SMS module- Temperature monitoring and control for press room- Manual potentiometer for material flow regulation- Pressol pneumatic grease system (for 18 kg bucket)- Control cabinet with VFD for LP22 connection- Cable set for automatic operation- Level sensor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,835 h, machine/vehicle number: 2006671, power: 36.5 kW (49.63 HP), load capacity: 450 kg, empty load weight: 13,320 kg, fuel type: diesel, working length: 22,500 mm, Equipment: all wheel drive, No minimum price – guaranteed sale to the highest bidder! Dcodpszza Arefx Aa Hol TECHNICAL DETAILS Working height: 22,500 mm Load capacity: 450 kg Maximum side load: 400 N Permissible inclination: 5° MACHINE DETAILS Operating hours: 1,835 h Drive: All-wheel drive Engine: Diesel Kubota External reference: SL18426SP

Condition: used, Consisting of: “GEA-CFS” battering machine Type ER 900 all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump outside dimensions (l x w x h) : ± 1.700 x 1.500 x 1.700 mm + “GEA-CFS” breading line Type PR 900 2,83 kW suitable for standard belt width 900 mm mobile adjustable speed adjustable working height with air knive Dedpfx Aaszza Als Hocl outside dimensions (l x w x h) : ± 2.800 x 1.200 x 2.100 mm

Condition: used, belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt Dsdszza Afepfx Aa Hscl with infeed belt mobile dimensions (l x w x h) : ± 2.500 x 800 x 1.200 mm

Condition: used, Year of construction: 1995, Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Dodozzaz Uopfx Aa Hecl Variable print repeat: 14”–26” Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24” printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind shaft • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening Die Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and perforation station including: o Common paper infeed with pull wheels o Length perforation o Space for two file-hole groups o IMR block with duplex sprocket punching (245–485 mm) o Pile marking device o Length slitting o 24” file-hole punch unit o Common anvil cylinder for two cross-perforation cylinders up to 28” o Variable zig-zag folder (5”–16”) o 2 × 24” cross-perforation cylinders Control & Equipment: • Main drive motor frame • Press control panel • Main electrical cabinet • Plate bender

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Ventilator VRZ 1120/63/3 WSN 180, power: 55 kW (74.78 HP), Radial industrial fan with a robust, welded sheet steel construction. Operational volume flow: 9.0017 m³/s; total pressure difference: 2001 Pa; shaft power: 20.8 kW. Low operating hours, as it was used exclusively for testing purposes. Very good condition. Very high brand quality: Zenner fan; consoles, impellers, and housing are fully welded; Küenle motor. Includes a set of vibration dampers, compensators with guide vanes on the pressure and suction sides; color: blue according to RAL 5015. Dcodpfx Aajzzaz Ij Hol

Condition: used, completely stainless steel Suitable for direct steam injection (4 points at the bottom of the conical base) Operating temperature 125°C Operating pressure 2.5 bar Insulated (bottom + walls) Manhole DN500 Internal diameter 2,000 mm Boiler height with closed lid ± 3.000 mm Boiler height with open lid ± 4.150 mm Suitable for CIP Total volume of contents 4,840L Dcjdpfxozzazzj Aa Hel Total dimensions: (L x W x H): ± 3.000 x 2.400 x 3.200 mm Hydraulically operated lid + Hydraulic unit in good condition electric control box not included

Year of construction: 2018, condition: excellent (used), Vötsch VT³ 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Year of Construction: 2018 Machine Type: Temperature Shock Test Chamber / 2-Chamber Shock Test System Test Chamber Volume: 125 liters For sale is a used Vötsch VT³ 7012 S2 temperature shock test chamber with a 2-chamber system and programmable touch panel control. The system was developed for rapid and abrupt temperature changes and is particularly suitable for Environmental Stress Screening (ESS), environmental simulation, electronics and component testing, research and development, as well as quality assurance. The test specimen is transported between the hot and cold chambers via a vertically moving transport carriage. Technical Data: Temperature Range, Hot Chamber: +50 °C to +220 °C Temperature Range, Cold Chamber: -80 °C to +70 °C Test Chamber Volume: 125 liters Number of Chambers: 2 Max. Test Weight / Carriage Load: 50 kg Refrigeration Unit: water-cooled Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: Refrigerant 1: R449A Refrigerant Quantity: 1.70 kg GWP: 1,397 CO₂ Equivalent: 2.37 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Refrigerant 2: R23 Refrigerant Quantity: 1.27 kg GWP: 14,800 CO₂ Equivalent: 18.80 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Standby Pressure: 14 bar g Dimensions: Test Chamber (W × D × H): 470 × 650 × 410 mm External Dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required Room Height for Operation: approx. 2,450 mm Equipment: 2-chamber temperature shock system Vertically moving transport carriage Programmable touch panel control CONTROLPAD for status display Observation window Test chamber lighting Cable gland Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / Remaining time display USB and Ethernet interfaces Application Areas: Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Life and stress tests Dedpfx Ajzzazuoa Hecl Transport Data: Dimensions (L × W × H): approx. 2,350 × 970 × 1,985 mm Weight: to be determined Transport by freight forwarder Condition: Used Optical condition as shown in the pictures. Scope of Supply: Vötsch VT³ 7012 S2 temperature shock test chamber Touch panel control Equipment and accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.