MOSTÁRNA Lískovec, spol. s r.o.

Condition: ready for operation (used), Year of construction: 1989, Available immediately ex works: Lsdpfe Aa Ipbox Akwoah Hydraulic plate shear Atlantik Type ATS 3012 Year of manufacture 1989 Cutting length 3050 mm Material thickness up to 12 mm Cutting angle adjustment 0.5 – 3 degrees Hydraulic hold-down clamps, 18 pieces Electric back gauge, 1000 mm Drive power 25 kW Weight 9 tons Price: Euro 7,000.—plus VAT ex works.

Condition: used, Year of construction: 2005, sheet width 3100 mm plate thickness 12 mm distance between columns 3260 mm back stop - adjustable 3 - 1250 mm power capacity 37 kW voltage 400 V weight of the machine ca. ca. 14 t dimensions of the machine ca. 4,00 x 4,00 x 2,20 m CNC-controlled plate shear Lsdpfx Akjz Sdyvjwoah

Condition: good (used), functionality: fully functional, Year of construction: 2010, Hydraulic sheet metal shear Manufacturer: ATLANTIC, Type: ATS 2012 Year of manufacture: 2010 Technical data Manufacturer: ATLANTIC Type: ATS 2012 Ledpez Ny Ntjfx Akwsah Year of manufacture: 2010 Sheet metal size: 2000 x 12 mm Shear angle adjustment: 0.5 – 3 degrees Working height: 900 mm Motor power: 22.5 kW Dimensions: approx. L 3.20 x W 1.50 x H 2.30 m Weight: approx. 8 t Equipment • Angle stop • Support arms • Manual shear gap adjustment • Automatic shear angle adjustment • Motorized backstop All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, sheet thickness (max.): 12 mm, overall weight: 8,000 kg, working length: 3,000 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Max. sheet thickness, steel: 12 mm Tensile strength, steel: 450 N/mm² Working length: 3,000 mm Max. feed rate: 88 mm/s Performance data Power: 22 kW Tool weight: 31.5 kg MACHINE DETAILS Power: 22 kW Input voltage: 380 V Input frequency: 50 Hz Dimensions & Weight Lsdpfx Aez Nnvbokwoah Dimensions (L x W x H): 4,500 x 2,600 x 2,100 mm Total weight: 8,000 kg External Reference: Zafa - Lot 12

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Laodpfx Akoz Izmcewjh Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: as good as new (ex-display), functionality: fully functional, Hydraulic plate shear / WEIKA Model 3200x10mm / NEW - Unused -CE marking -Control display -Cutting length 3200mm -Max. cutting thickness / STEEL 10mm -Max. cutting thickness / STAINLESS STEEL 8mm -Max. cutting thickness / ALUMINUM 12mm Ljdpfx Ajz Ikrnskwoah -Digital back gauge -Manual shear gap adjustment -Foot switch -Rear light barrier / Left - Right -Front support with ball rollers -Drive power 11KW Dimensions: L x W x H 4 x 2 x 1.9 meters / Weight 8000KG Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 621307509, controller model: Delem DAC-350, working width: 3,080 mm, sheet thickness (max.): 10 mm, overall weight: 11,500 kg, No minimum price – guaranteed sale to the highest bidder! Ledpfxoz Ebcfj Akwoah TECHNICAL DETAILS Max. sheet thickness: 10 mm Max. working width: 3,080 mm Cutting speed: 20 mm/min MACHINE DETAILS Control system: CNC Controller: Delem DAC-350 Drive type: Hydraulic Connected power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,980 x 2,400 x 2,200 mm Weight: 11,500 kg Transport packages: 1 unit EQUIPMENT Electric back gauge Pneumatic sheet support system Fixed finger guard with hinged protection Ball-bearing table Motorized angle adjustment Motorized shear gap adjustment Documentation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, power: 18.5 kW (25.15 HP), overall weight: 17,000 kg, Equipment: CE marking, documentation/manual, finger protection, foot remote control, type plate available, Hydraulic shear LVD HST-C 40/13 Year of manufacture: 1995 Serial number: 22764 Technical specifications: Max. sheet thickness: 13 mm Cutting length: 4050 mm Back gauge range: 1000 mm Cutting angle: 0.5° - 2° Blade clearance: 0.1 - 2.2 mm Number of strokes per minute: 7 - 28 Number of holding points: 21 Motor: 18.5 kW Weight: 17000 kg Oil capacity: 300 l Voltage: 3 x 380 V Included options: Safety standards: CE 1 square arm support, length 1500 mm 2 additional supports, length 1500 mm Laodpfx Aez D Dnbskwjh

Condition: used, functionality: fully functional, operating hours: 1,745 h, machine/vehicle number: 610308258, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, table height: 900 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, overall weight: 9,500 kg, total length: 3,300 mm, total width: 3,400 mm, total height: 1,850 mm, number of support arms: 2, Equipment: angle stop, documentation/manual, emergency stop, finger protection, foot remote control, Plate shear Promecam GH1030Z Machine no. 610308258 Very few operating hours for the machine's age. The sheet metal clamping cylinders (8 pieces) have been newly sealed in 2026. Lodpfxsz Dpw Uo Akwoah Cutting length 3000 mm (3100 mm) Approx. 9500 kg Sheet thickness, steel: 10 mm Sheet thickness, stainless steel: 6 mm Sheet thickness, aluminum: 12 mm

Condition: used, Year of construction: 2022, sheet length: 3040sheet thickness: 13,0total power requirements: 30weight approx.: 13,4messurements (LxWxH): 3850 x 2300 x 2260CNC Guillotine Shear DENER AS 3013 – Young Machine Ex Works – including loading onto truck For sale is a very young CNC guillotine shear DENER  AS 3013. The machine is in very good condition and is being sold due to a factory closure. The price already includes: - Loading onto truck - Immediate availability by arrangement (Location St. Pölten)  The machine can be inspected  by prior appointment. If you are interested or have any questions, please do not hesitate to contact us. Technical Data Sheet thickness: 13 mm Cutting length: 3,040 mm Cutting angle: 0.5–3° Number of hold-downs: 16 Back gauge: 1,000 mm, CNC-controlled Motor power: 30 kW Cutting speed (0.5–3°): 17–8 cuts/min Throat depth: 350 mm Oil tank: 400 litres Length: 3,850 mm Width: 2,350 / 3,270 mm Height: 2,260 mm Weight: 13,400 kg Equipment- Swing beam design - CNC control for:- Back gauge - Cutting angle - Cutting gap Lajdpfx Ajzw Rv Ujkwsh - Cutting length - Ball screws for the back gauge - Ball transfers in the table - 2 × support arms, 1,000 mm - Cutting line illumination - Foldable finger guard up to 1,000 mm Including pneumatic sheet metal support system!

Condition: good (used), Year of construction: 1987, machine/vehicle number: A20072, Offer 26300 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable, motorized 0.5 - 3° - Manual cutting gap adjustment - Number of hydraulic clamping bars 18 pcs - Motorized rear stop 10 - 1000 mm - Front angle stop - Number of strokes per minute, depending on cutting angle and cutting length 7 - 17 - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm Lajdpfx Akezw Dt Howoh - Weight approx. 8500 kg - Includes: - Foot switch - Cutting line illumination

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Ledezwylxopfx Akwoah Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: good (used), functionality: fully functional, working width: 2,050 mm, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: motor-driven, power: 9 kW (12.24 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 8,500 kg, total length: 2,600 mm, Equipment: angle stop, emergency stop, foot remote control, Well-maintained Promecam GH1020 shear. Cutting length 2050 mm and 10 mm steel capacity! Ljdpfx Akezvhktjwsah Can be inspected by prior arrangement.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, controller manufacturer: Robosoft, controller model: PC90, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 14 1/min, sheet thickness (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, back gauge: 1,000 mm, overall weight: 8,500 kg, total length: 4,100 mm, total width: 2,400 mm, total height: 2,300 mm, Maximum sheet thickness: 12mm Max. cutting length: 3100mm Strokes on full length: 7mm Strokes in short 1000 length: 14 Cutting angle: 0,5 - 3° Length backgauge: 0 - 1000mm Number of down holders: 18 Operated mechanical or hydraulic:Hydraulic Lajdpfjzvf Hrex Akwsh Power: 24kW Length: 4100mm Width: 2400mm Height: 2300mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Lodezuwvvepfx Akwsah Max. sheet thickness: 13 mm Max. working width: 3,100 mm Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS GENERAL Control system: CNC Controller: Durma DT-7 Drive type: Hydraulic Power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table

Condition: good (used), LVD Guillotine Shear Laedpjzt Tmnjfx Akweh Brand: LVD Type: MCVN 31/13 Year of manufacture: 12-81 Cutting capacity for steel: 13mm Cutting length: 3100mm Automatic angle adjustment Adjustable cutting clearance Power: 11KW Condition of blades: good Machine weight: 11000KG Length: 3900mm Width: 3550mm Height: 2350mm

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94102, Offer 26181 Technical Data: - max. working width 2540 mm - max. cutting capacity St 40 10 mm - Cutting angle adjustable, motorized 0.5 - 3 ° - Manual cutting gap adjustment - Number of hydraulic clamping cylinders 15 pcs Ledpfjzruf Njx Akwsah - Motorized rear stop with positioning control 10 - 1000 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 7500 kg - Including: - Electronic foot switch - Cutting line illumination

Condition: used, functionality: unexamined, Year of construction: 2007, control type: PLC-controlled, working width: 3,000 mm, cutting angle (max.): 3 °, sheet thickness brass (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, overall weight: 8,500 kg, SP8 control system capacity 3000 x 12 mm power 22.5 kW electric stops weight 8500 kg Lsdpfxjznvgmj Akweah

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, Technical data: Cutting length: 3100 mm Max. sheet thickness, St 42: 10 mm Max. sheet thickness, INOX/V2A: 6.0 mm Cutting angle: 2.0° Stroke rate: 12 per minute Rear gauge range: 5.0 mm to 1000 mm Motor power: 22 kW Hydr. clamps: 17 pcs Oil tank capacity: 170 l Lsdpozlpahsfx Akweah Max. oil pressure in the cylinder: 260 kg/cm² Standard accessories: - CNC-controlled, motorized rear gauge. Travel distance 1000 mm. With backlash-free ball screws. - Table construction, closed design, consisting of interchangeable support plates including ball rollers - Manual cutting gap adjustment, centrally operated on the right side stand - Electric motor: 400 V, 50 Hz, 3-phase - Single or continuous stroke - Tip function for lowering the top beam, e.g., for adjusting the cutting gap - Side gauge 90°, 920 mm long, measuring length from the cutting line 1000 mm - 2 additional support brackets Design of the two front support brackets with scale, T-slots, and tilting cams - CNC control Cybelec "Cybtouch 8W" for automatic adjustment - of the cutting gap (option) - of the rear gauge - of the cutting length Further programming functions: - Step repetition - Piece counter - Finger protection light curtain at the front instead of a safety grille, allowing an unobstructed view of the cutting zone After interrupting the cutting function of the shear and the clamps by activating the light curtain, the cutting function is immediately released again when the operator's hand(s) are no longer in the danger area. The reset button does not need to be pressed. - Rear gauge - retraction - "Return to sender", smallest sheet part 100 mm x 160 mm (not possible with sheet support type "A", only with sheet support "U") RS-232 interface, LCD screen 128 x 64 mm. - 1 set of blades mounted on the machine for cutting steel with a strength of 450 - 700 K/mm². Cutting edges: top blade 2, bottom blade 4, material grade "K110", manufacturer: Böhler Germany/Austria - Individually acting hydr. clamps with plastic inserts - Oil level indicator - Oil filling - Display of the cutting line by blade illumination and wire - Operating hour counter - CE conformity - Operating manual, spare parts list, wiring diagram, hydraulic diagram - Painting, 3-color: Body: RAL7015 slate gray; Side covers: RAL7035 light gray; Finger protection: RAL3003 ruby red Included: Motorized cutting gap adjustment. Controlled via CNC Cybelec "Cybtouch 8W".

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values Ledpfx Akszkvx Uowsah - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 800 h, control type: NC control, controller manufacturer: Delem, controller model: DAC-362, working width: 4,050 mm, sheet thickness (max.): 10 mm, Delem DAC-362 NC-control programmable limit stop automatic cutting crack adjustment automatic cutting angle adjustment The machine has only 800 working hours Technische Daten / technical details: Schnittlänge / max. cutting length 4050 mm Schnittleistung / cutting capacity 10 mm Ausladung / overhang 210 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 15 kW Laodpfx Akszkty Aewsh Gewicht der Maschine ca. / weight 18000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2000, sheet length: 4100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000Stroke/min: 8 Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable Ledszd H U Hspfx Akwoah - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Additional Details: -

Condition: good (used), Maqfort HGD 3013 3200x13mm Laedpfjzdzn Usx Akwsh Runs well, but the back gauge needs to be checked!

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11.205.6002, control type: PLC-controlled, working width: 6,100 mm, sheet thickness (max.): 10 mm, power: 45 kW (61.18 HP), overall weight: 40,000 kg, total length: 70,000 mm, total height: 3,500 mm, Equipment: emergency stop, type plate available, used Helmut Lotze hydraulic plate shear Lajdpfx Akey Tixpeweh Price negotiable

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Laodpfoy Siftox Akwsh